562777
25
Zoom out
Zoom in
Previous page
1/31
Next page
26
Connection and function
Please ensure that all electrical components are switched off before connecting. With
its universal connection options the Active Monitor is ready for operation with most
signal sources. Depending on the type and fittings of the sources used you can choose
between the symmetrical XLR or the conventional cinch input. We strongly recommend
that you do not operate the inputs in parallel.
Automatic on/off switch
To make your Active Monitor easier to use the AM 5 is equipped with automatic
switch-on. If the “AMP MODE” switch is set to “AUTO” the Active Monitor turns
on automatically when there is a music signal and turns off after about 20 minutes when
there is no music signal. If the “AMP MODE” switch is in the “ON” position the Active
Monitor stays permanently on.
Input sensitivity
The “INPUT SENS.” switch allows the input sensitivity of the Active Monitor to be
adjusted to suit the output level of the connected sound source. The factory setting
is 0 dBu (0.775 V). To increase the input sensitivity switch it to –6 dBu (0.39 V) and
to reduce the input sensitivity switch it to 10 dBu (2.45 V).
High pass filter
The high pass filter has three settings, allowing the bass reproduction to be limited
to 50 Hz, 70 Hz or 100 Hz. This enables it to be adjusted perfectly to the location
and function, helps to prevent low frequency distortion and can be adjusted if an
additional active subwoofer is used.
English
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canton AM5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canton AM5 in the language / languages: English, German as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info