543021

Canon XL H1S Manual

143
Zoom out
Zoom in
Previous page
1/158
Next page
143
Additional Information
Cassette Handling Precautions
Rewind tapes after use. If the tape is lose or damaged, it may cause picture and sound distortion.
Return cassettes to their case and store them upright. Rewind tapes from time to time if they are
stored for a long time.
Do not leave the cassette in the camcorder after use.
Do not use spliced tapes or nonstandard cassettes as they may damage the camcorder.
Do not use tapes that have been jammed as video heads may become dirty.
Do not insert anything into the small holes of the cassette, or cover them with cellophane tape.
Handle cassettes with care. Do not drop or subject them to severe impact as this may damage the
cassettes.
With cassettes equipped with a memory function, metal plated terminals may become dirty with use.
Clean the terminals with a cotton swab after about 10 times of loading/unloading. The memory
function is not supported by the camcorder.
Protecting Tapes from Accidental Erasure
To protect your recordings from accidental erasure, slide
the tab on the cassette to the left. (This switch position is
usually labeled SAVE or ERASE OFF.)
If you load a protected cassette in recording mode, the
message “THE TAPE IS SET FOR ERASURE
PREVENTION” appears for approx. 4 seconds and
starts flashing. If you wish to record on that cassette,
slide the tab back to the right.
Memory Card
To transfer the still images recorded on the memory disc to a computer, use a commercially available
card reader or PC/PCMCIA memory card adapter.
Initialize new memory cards with the camcorder. Memory cards initialized with other devices such as
a computer may not operate correctly.
We recommend backing up memory card images to your computer’s hard drive or other external
memory device. Image data may be corrupted or lost due to memory card defects or exposure to
static electricity. Canon makes no warranties for corrupted or lost data.
Do not use memory cards in places subject to strong magnetic fields.
Do not leave memory cards in places subject to high humidity or high temperature.
Do not disassemble memory cards.
Do not bend, drop, or subject memory cards to shocks and do not expose them to water.
Moving a memory card rapidly between hot and cold temperatures may cause condensation to form
on its external and internal surfaces. If condensation forms on the card, put it aside until the droplets
have evaporated completely.
Do not touch or expose the terminals to dust or dirt.
Check the direction before inserting the memory card. Forcing a memory card backwards into the
slot may damage the memory card or the camcorder.
Do not remove the label from the memory card, or attach other labels to the memory card.
When you erase image files or initialize the memory card, only the file allocation table is altered and
the data itself is not actually deleted. Take the necessary precautions when you dispose of the
memory card, for example by physically damaging it to prevent the leakage of private data.
SD/SDHC memory cards have a physical switch to prevent writing on the
card so as to avoid the accidental erasure of the card’s content. To write-
protect the memory card set the switch to the LOCK position.
LOCK switch
… 143 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XL H1S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XL H1S in the language / languages: English as an attachment in your email.

The manual is 10,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XL H1S

Canon XL H1S User Manual - German - 165 pages

Canon XL H1S User Manual - Dutch - 159 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info