543020
140
Zoom out
Zoom in
Previous page
1/158
Next page
140
List of Messages (in alphabetical order)
Message Explanation
CARD ERROR A memory card error occurred. The camcorder cannot record or play back the image.
The error may be temporary. If the message disappears after 4 seconds and flashes
in red, turn the camcorder off, remove the card and reinsert the card. If changes to
green, you can continue recording/playback.
CARD FULL No remaining capacity on the memory card. Replace with another card or erase images.
CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack. 15
CHECK THE HDV/DV INPUT DV cable is not connected, or the connected digital device is turned off. 89
CHECK THE LENS Lens is not correctly mounted. Turn the lens until it clicks. If the message does not
disappear, unmount and remount the lens.
CONDENSATION HAS BEEN DETECTED Condensation has been detected in the camcorder. 144
COPYRIGHT PROTECTED
DUBBING RESTRICTED
You attempted to dub a copyright protected tape. May also appear when an anomalous
signal is received during analog line-in recording, or during analog-digital conversion of a
copyright protected tape.
90
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
You attempted to play back a copyright protected tape.
90
ENTERING “POWER STANDBY” Appears for 1 second when you press the STANDBY button.
HD INCOMPATIBLE LENS You mounted a lens that does not support HDV recording.
HEADS DIRTY, USE CLEANING CASSETTE Video heads are dirty. Clean the video heads. 144
INCORRECT TAPE SPECIFICATION
PLAYBACK IS RESTRICTED
You attempted to play back a tape recorded in a standard different than the one to which is
the camcorder is set.
INPUT SIGNAL NOT SUPPORTED You attempted to input a video signal incompatible with the camcorder (for example 720p). 89
NAMING ERROR The folder and file numbers have reached their maximum value.
NO CARD Memory card not is inserted into the camcorder. 30
NO IMAGES No images are recorded on the memory card.
PLAYBACK STD LOCKED INCOMPATIBLE
VIDEO INPUT
When the playback standard is already set in the camcorder, you attempted to input a
video signal in a standard different from that set.
89
PLAYBACK STD LOCKED
PLAYBACK IS RESTRICTED
When the playback standard is already set in the camcorder, you attempted to play back a
tape in a video standard different from that set.
110
REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Remove the cassette and reinsert it. 29
SET THE TIME ZONE, DATE AND TIME You have not set the time zone, date and time. This message appears each time you turn
the power on until you set the time zone, date and time.
32
TAPE END Tape reached the end. Rewind the tape or replace the cassette.
THE CARD IS SET FOR ERASURE
PREVENTION
SD/SDHC memory card is set for erasure prevention. Replace the card or change the
position of the LOCK switch.
30
THE MEMORY CARD COVER IS OPEN Close the memory card cover.
THE TAPE IS SET FOR ERASURE
PREVENTION
Cassette is protected. Replace the cassette or change the position of the protect switch.
143
THIS LENS HAS NO STILL SHOOTING
CAPABILITY
You mounted a lens that does not support still image recording.
UNIDENTIFIABLE IMAGE Image is not recorded with JPEG compression, or with a compression not compatible with
the camcorder, or the image file is corrupted.
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XL H1A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XL H1A in the language / languages: English as an attachment in your email.

The manual is 10,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XL H1A

Canon XL H1A User Manual - German - 165 pages

Canon XL H1A User Manual - Dutch - 159 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info