709292
173
Zoom out
Zoom in
Previous page
1/231
Next page
173
IP Streaming
IP Streaming
After connecting the camcorder to a network, you can stream the camcorder’s live video and audio* over IP to a
compatible IP video decoder** connected to the network. You can use IP streaming for live broadcasts or to
send a news flash report from a location with poor network connectivity.
While IP streaming is activated, internal recording to an SD card in the camcorder is disabled but recording to an
external device is possible.
* Only 2 channels. During 4-channel audio recording, you can select which two channels to stream over IP.
**This can be a dedicated video transfer device or decoder software on a computer. For details about compatible decoders,
please visit your local Canon Web site.
Configuration of video streamed over IP
* > [3 ! Recording/Media Setup] > [Rec Format] setting. Available streaming signal options will vary depending on
the recording video configuration used.
IP Streaming Settings
Before you can stream video over IP, you need to configure settings related to the transfer like the protocol and
port number to use. You can also select the configuration of the streamed video.
Camcorder Settings
1 Configure an Ethernet network connection (A 159).
2 Select [IP Streaming Settings].
> [ ! Network Settings] > [IP Streaming Settings]
3To select the video streaming configuration, select [Streaming Output Signal].
Select the desired option and then press SET.
4To select the audio streaming channels, select [Audio Out Channels].
Select the desired option and then press SET.
5 Select [Protocol].
Select the desired option and then press SET.
If you selected [RTP+FEC], complete the error correction settings (A 174).
Options
[UDP]: This protocol prioritizes transfer speeds but does not guarantee the reliability/integrity of the data. Lost or
delayed IP packets are ignored.
[RTP]: Standard protocol for video/audio broadcasts over the Internet. Lost or delayed IP packets are ignored.
[RTP+FEC]: This setting uses the RTP protocol and adds a layer of FEC error correction so the receiving side* can
recover lost or delayed IP packets.
* A decoder compatible with FEC error correction is required.
Video format*
(compression)
Streaming configuration
Video
Audio
Bit rate Resolution Frame rate
XF-HEVC
(H.265/HEVC compression)
16 Mbps, 9 Mbps 3840x2160
59.94P, 29.97P, 50.00P,
25.00P
MPEG-2 AAC,
256 Kbps, 2 channels
9 Mbps, 4 Mbps 1920x1080
XF-AVC
(MPEG-4 AVC/H.264 compression)
9 Mbps, 4 Mbps 1920x1080 59.94i, 50.00i
Operating modes:
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XF705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XF705 in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XF705

Canon XF705 User Manual - German - 238 pages

Canon XF705 User Manual - Dutch - 229 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info