615742
226
Zoom out
Zoom in
Previous page
1/246
Next page
Troubleshooting
226
List of Messages
Refer to this section if a message appears on the screen. The messages in this section appear in alphabetical
order. Note that for some messages, an indication of the recording media involved (CF A, CF B, , or a
combination thereof) may appear above the message itself.
For error messages related to network connections, refer to
Network Functions
(A 228).
Accessing CF A/CF B/ Do not remove
- You opened the CF card slot cover or SD card slot cover while the camcorder was accessing the recording media.
Close the relevant card slot cover.
Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the recording media card in use and the recording was stopped. Use a
recommended card (A 38).
- Use an SD card rated CLASS 10 to record MP4 clips using slow & fast motion recording.
Cannot acquire battery information Continue using this battery pack?
- You attached a battery pack that does not bear the Intelligent System mark.
- If you are using a battery pack that bears the Intelligent System mark, there may be a problem with the camcorder or
battery pack. Consult a Canon Service Center.
Cannot play back
- The file control information is corrupted or there was a decoder error. Turn off the camcorder and back on again. If this
does not solve the problem, consult a Canon Service Center.
Corrupted file control information cannot be recovered. CF cards or MXF clips with corrupt file control information
cannot be read by Canon XF Utility or the Canon XF plugins.
Cannot record
- The file control information is corrupted or there was an encoder error. Turn off the camcorder and back on again.
Then, remove the CF card being used and reinsert it. Alternatively, replace the CF card. If this does not solve the
problem, consult a Canon Service Center.
Corrupted file control information cannot be recovered. CF cards or MXF clips with corrupt file control information
cannot be read by Canon XF Utility or the Canon XF plugins.
Cannot restore
- Could not recover data on the CF card. Save your MXF clips (A 166) and initialize the CF card (A 41).
Cannot switch CF card slots
- The SLOT SELECT button was pressed while the camcorder is recording or when the movie format is set to MP4. Wait
until recording is finished to change the selected CF card slot.
CF A/CF B error
- The CF card cannot be recognized or cannot be accessed. Check that the CF card is inserted correctly and not
malfunctioning.
CF AJCF B / CF BJCF A Switched
- This message appears when you use the SLOT SELECT button to switch the CF card slot in use or recording
continued from one CF card to the other.
CF AJCF B / CF BJCF A Will switch in a moment
- The CF card is almost full so recording will continue on the other CF card in approximately 1 minute.
Change the battery pack
- The battery pack is exhausted. Replace or charge the battery pack.
Check the data on CF A/CF B Initializing the card is also recommended
- The CF card cannot be used for any of the following reasons.
A problem has occurred with the CF card.
The camcorder cannot read the CF card’s data.
The CF card was initialized using a computer.
The CF card has been partitioned.
- Save your MXF clips (A 166) and initialize the CF card (A 41).
Check the data on Initializing the card is also recommended
- You inserted an SD card that was formatted using another device into the camcorder. Initialize the SD card with this
camcorder.
COPY
226


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XF200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XF200 in the language / languages: English as an attachment in your email.

The manual is 23,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XF200

Canon XF200 User Manual - German - 264 pages

Canon XF200 User Manual - Dutch - 248 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info