615742

Canon XF200 Manual

173
Zoom out
Zoom in
Previous page
1/246
Next page
173
Connecting to a Wi-Fi Network
Connecting to a Wi-Fi Network
The camcorder is Wi-Fi certified and can connect to a Wi-Fi network using an external access
point (wireless router) or can itself serve as a Wi-Fi access point. The camcorder can connect to
wireless routers (access points) compliant with the 802.11a*/b/g/n protocol and are Wi-Fi certified
(bear the logo shown on the right).
The camcorder offers 5 ways to connect to a Wi-Fi network and the method you use will depend on the type and
specifications of the access point and network you want to use. Note that using an unprotected Wi-Fi network
can expose your data to monitoring by unauthorized third parties. Be aware of the risks involved.
* The 802.11a protocol is not available for camcorders whose identification label contains the camcorder ID “ID0041” and the text
“2.4 GHz only” (A 240).
WPS (button): If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be
easy and require minimal configuring and no passwords. To check if your wireless router
has a WPS button and for details about how to activate the Wi-Fi protected setup, refer to
the instruction manual of your wireless router.
WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS using
a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless
router’s WPS function. For details refer to the instruction manual of your wireless router.
Searching for Access Points: If your access point does not support the WPS function or you cannot activate it,
you can have the camcorder search for access points in the area.
Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automatically
detected by the camcorder, you can enter all the necessary settings manually. This requires more advanced
knowledge of Wi-Fi and network settings.
Camera Access Point: When shooting in a location where there are no access points available, the camcorder
can serve as a wireless access point*. Wi-Fi enabled devices will be able to connect to the camcorder directly.
* Limited only to the connection between the camcorder and supported Wi-Fi enabled devices. The functionality is not the same
as that of commercially available access points.
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the easiest way to connect to a Wi-Fi access point. You can do simply by
pushing a button (if the access point (wireless router) you want to connect to has a WPS button) or using a PIN
code issued by the camcorder.
Wireless Routers with a WPS Button
1 Open the [Set Up New] submenu.
[w Other Functions] > [Network Settings] > [Connection Settings]
> [Set Up New]
2 Select the [WPS: Button] method.
[Wi-Fi] > [Infrastructure] > [WPS: Button]
3 Press and hold the WPS button on the wireless router.
• The length of time required to hold down the WPS button depends
on the wireless router. Refer to the instruction manual of your wireless
router and make sure the wireless router’s WPS function is activated.
Operating modes:
[w Other Functions]
[Network Settings]
[Connection Settings]
[Set Up New]
COPY
… 173 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XF200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XF200 in the language / languages: English as an attachment in your email.

The manual is 23,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XF200

Canon XF200 User Manual - German - 264 pages

Canon XF200 User Manual - Dutch - 248 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info