543012
163
Zoom out
Zoom in
Previous page
1/180
Next page
163
Troubleshooting
CF A/CF B Number of clips already at maximum
- The CF card already contains the maximum number of clips (999 clips). Replace the CF card or use the CF card in the
other CF card slot.
- Because both CF cards reached the maximum number of clips, double slot recording is not available.
During double slot recording, both “CF A” and “CF B” will appear in the message.
CF A/CF B Operation canceled.
- The file control information is corrupt. Corrupted file control information cannot be recovered. CF cards or clips with
corrupt file control information cannot be read by the supplied Canon XF Utility or plugins.
- When recording a single clip for an extended period of time, the clip will be split into smaller video files every 2 GB.
This message will appear when the number of smaller video files reaches 99.
CF A/CF B Recovering is completed Check the clip
- The recovery process for data on the CF card is complete. Check the clips on the CF card.
CF A/CF B Media is not supported
- CF cards that are less than 512 MB or not UDMA-compatible cannot be used with the camcorder. Use a
recommended CF card (0 34).
CF A/CF B Using a card that supports UDMA mode 4 or higher is recommended
- The CF card’s UDMA mode is lower than UDMA4. We recommend using a CF card that with a UDMA mode of at least
UDMA4.
CF AJCF B / CF BJCF A Switched
- This message appears when you use the SLOT SELECT button to switch the CF card slot in use or recording
continued from one CF card to the other.
CF AJCF B / CF BJCF A Will switch in a moment
- The CF card is almost full so recording will continue on the other CF card in approximately 1 minute.
Change the battery pack
- The battery pack is exhausted. Replace or charge the battery pack.
Check data on CF A/CF B and initializing the card is recommended
- The CF card cannot be used for any of the following reasons.
A problem has occurred with the CF card.
The camcorder cannot read the CF card’s data.
The CF card was initialized using a computer.
The CF card has been partitioned.
- Save your clips (0 128) and initialize the CF card (0 36).
Check the SD card
- The SD card cannot be accessed. Check that the SD card is inserted correctly and not malfunctioning.
- Due to an SD card error, photos cannot be taken or viewed. Remove and then reinsert the SD card or use a different
SD card.
Cover is open
- The CF card slot cover was open when the camcorder was switched to or turned on in mode. Close the cover.
Data on CF A/CF B needs recovering Attempt to recover?
- If data on the CF card is corrupted, such as when the power suddenly turned off while recording, the data must be
recovered. When this message appears, select [Yes] and press SET.
Do not disconnect the USB cable or the power source until you safely end the connection from the computer.
Cannot write data with this connection. To write data to the camcorder, connect the compact power adapter then
reconnect the camcorder and computer.
- The camcorder cannot be operated while it is not being powered by the compact power adapter and is connected to
a computer with a USB cable. In addition, clips cannot be written back to the camcorder. To avoid corrupting the data
on the memory card, use the computer’s Safely Remove Hardware function to end the connection and disconnect the
USB cable before using the camcorder.
- To be able to write back clips to the camcorder, use the computer’s Safely Remove Hardware function to end the
connection, disconnect the USB cable, power the camcorder using the compact power adapter and only then
connect it to the computer again.
Do not disconnect the USB cable or the power source until you safely end the connection from the computer.
Connect the compact power adapter
- When the camcorder is in mode and is connected to the computer with a USB cable, the camcorder cannot be
operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of
the clips on the memory card. Use the computer’s Safely Remove Hardware function to end the connection and
disconnect the USB cable before using the camcorder.
- To be able to write back clips to the camcorder, power the camcorder using the compact power adapter and only then
connect it to the computer using a USB cable.
COPY
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XF 105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XF 105 in the language / languages: English as an attachment in your email.

The manual is 13,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XF 105

Canon XF 105 User Manual - German - 195 pages

Canon XF 105 User Manual - Dutch - 183 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info