543647
124
Zoom out
Zoom in
Previous page
1/146
Next page
Maintenance
124
Cleaning and Replacing the Air Filter
An air filter is installed in the air intake vent on the bottom of the main body to protect the
internal lens and mirror from dust. Should the air filter become clogged with dust, the pro-
jector may be damaged since it will block the air flow into the projector and raises the
internal temperature of the projector. The following screen is displayed when turning on
the projector if the air filter needs to be cleaned. Clean the air filter if such is the case.
Cleaning the Air Filter
Turn the projector upside down, remove the cover by pushing the latch, remove the air
filter, and clean it with a vacuum cleaner.
When cleaning dust off the side exhaust vent and the bottom air intake vent, bring the
vacuum cleaner nozzle close to them directly.
If the above screen is displayed when turning on the projector after cleaning the air fil-
ter, select [Yes].
Replacing the Air Filter
Make sure to replace the air filter when replacing the lamp.
Follow the following procedure when replacing the air filter.
1 Turn off the projector, disconnect the
power plug from the AC outlet, and let
the projector stand for at least 1 hour.
2 Remove the filter cover by pushing the
position of the arrow.
3 Remove the air filter.
4 Install a cleaned or new air filter.
5 Install the filter cover securely without
any space.
Only [<], [>], the OK button, and the POWER button
are available while this screen is displayed (When
you press the POWER button, "Push POWER button
again to turn off power." message appears).
After this screen has been displayed for 10 seconds
and disappeared, all buttons become operable.
Handle the air filter carefully. If damaged, the air filter will not work appropriately
An air filter can be ordered from your dealer.
Filter cover
Air filter
Push
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XEED WUX10 Mark II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XEED WUX10 Mark II in the language / languages: English as an attachment in your email.

The manual is 11,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XEED WUX10 Mark II

Canon XEED WUX10 Mark II User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info