543647
19
Zoom out
Zoom in
Previous page
1/146
Next page
19
Safety Instructions
Safety Instructions
When placing the projector on a castered stand or table, be sure to lock the
casters.
Failure to do so may cause the projector to move or topple, resulting in an
injury.
Position the projector in a horizontal position.
Install the projector correctly. Incorrect
installation may cause troubles and acci-
dents.
Do not tilt the projector more than 20
degrees above and below the horizontal.
When you want to use your projector point-
ing up or down, make sure to place the projector straight up or down.
Do not install the projector vertically.
Do Not Use in the Following Environments
Do not place the projector on an unstable or slanted surface. The projector
may fall causing a personal injury.
Do not place it in an oily, smoky, or damp location (e.g., near a cooking table
or a humidifier). It may cause a fire or an electric shock.
Do not place it near an exhaust outlet of air-conditioning equipment.
Do not install the projector in a humid or dusty location or a position where
there is a lot of oily or cigarette smoke. Optical parts such as a lens and mirror
may be stained, resulting in poor picture quality.
If the projector is carried from a cold place to a warm place or the room tem-
perature is raised rapidly, condensation may form on the lens and mirror due to
the moisture in the atmosphere, resulting in a blurred picture. Wait until con-
densation evaporates and normal picture is shown.
Do not use the projector in a place subject to either very high or very low tem-
peratures. Doing so may cause malfunction. The ranges of the operating and
storage temperatures are as shown below:
Operating temperature: +5°C to +35°C (Humidity: 85% or below)
Storage temperature: -10°C to +60°C
Using the Projector at 2300 Meters or More Above Sea Level
If you use the projector at 2300 meters or more above sea level, the special
configuration is required to cool down the projector properly. Contact your
dealer.
Caution
20°
20°
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XEED WUX10 Mark II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XEED WUX10 Mark II in the language / languages: English as an attachment in your email.

The manual is 11,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XEED WUX10 Mark II

Canon XEED WUX10 Mark II User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info