215651
145
Zoom out
Zoom in
Previous page
1/168
Next page
145
Maintenance
Appendix
Replacing the Lamp
When the time of use of the lamp exceeds the certain amount of time, the following mes-
sage (two types) is displayed for 10 seconds every time the projector is turned on.
1,800 - less than 2,000 hours
After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
This message will not be displayed again if you select [Cancel] in response to the mes-
sage "Do you want to display this message again?".
Over 2,000 hours
After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
You can check the time of use of the lamp in [Lamp counter] in the [System settings]
menu (P109).
About the Replacing Lamp
This projector uses the following lamp.
Lamp type No.RS-LP05
Be sure to use the specified lamp.
A lamp can be ordered from your dealer.
When replacing the lamp, turn off the projector, wait until the cooling fan stops, disconnect the
power plug from the AC outlet, and let the projector stand for at least 1 hour. Otherwise, you
may get burned because the main unit is very hot immediately after the projector is turned off.
Do not touch the inner glass surface when you replace the lamp. Otherwise, the projector 's
performance may degrade.
Make sure to handle the lamp carefully and correctly since it may explode if it is scratched or
shocked. If a lamp explodes, follow the instructions under "If a Lamp Explodes" on page 18.
Do not remove screws unless specified.
Prepare the new lamp when this screen is dis-
played.
Only [<], [>], the OK button, and the POWER
button are available while this screen is dis-
played.
When you press the POWER button, "Push
POWER button again to turn off power." mes-
sage appears.
Replace the lamp by referring to the procedure
on page 146 when this screen is displayed.
Only the POWER button is available while this
screen is displayed.
When you press the POWER button, "Push
POWER button again to turn off the power."
message appears.
Caution
145


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon xeed sx800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon xeed sx800 in the language / languages: English as an attachment in your email.

The manual is 13,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon xeed sx800

Canon xeed sx800 User Manual - German - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info