215651
139
Zoom out
Zoom in
Previous page
1/168
Next page
139
Troubleshooting
Appendix
Symptoms and Solutions
You cannot turn on the projector.
You cannot project an image from the projector.
Cause Countermeasure
The power cord is not connected
correctly.
Check whether the power cord is connected correctly. (P49)
Check that [Key lock] is not enabled. (P105)
The power cord has just been con-
nected.
You cannot turn on the projector until the POWER indicator
turns red after connecting the power plug. (P49)
The lamp cover is open.
Unplug the power cord from the power outlet and correctly
install the lamp cover and then turn on the projector again.
The safety device has activated
because you put the projector in
the carrying bag during the cooling
fan was rotating.
When the safety device is active, the POWER lamp does not
turn on when you connect the power cord. You cannot
release the safety device. Contact your dealer.
The safety device is activated
because the air intake or the
exhaust vent is blocked and the
internal temperature of the projec-
tor is increased.
When the safety device is active, the POWER lamp does not
turn on when you connect the power cord. You cannot
release the safety device for safety reason. Remove any
obstacle that is blocking the air intake or exhaust vent and
contact your dealer.
Cause Countermeasure
Any connection cable is con-
nected incorrectly.
Check whether the projector is connected to the computer or
AV equipment correctly. (P38, P39, P54)
20 seconds have not passed since
the projector was turned on.
When the projector is turned on, the Opening window is dis-
played for approximately 20 seconds.
To project an image
immediately, press the OK button on the remote control or
top control. (P49)
No image is sent from the AV
equipment.
Check that an image is played on the connected digital
camera, video camcorder, DVD, etc.
The wrong video terminal or signal
type is selected.
Check that the correct video terminal and signal type are
selected. (P38, P39, P54)
No input signal type has been
selected.
Press the INPUT button to select an appropriate input signal
type. (P55)
The video signal type is incorrect. Check whether the selected signal type is correct. (P80,
P81, P150)
The BLANK function has been
selected.
Press the BLANK button on the remote control. (P70)
No image is sent due to the prob-
lem in the computer.
Turn on the projector and computer in this order again.
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon xeed sx800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon xeed sx800 in the language / languages: English as an attachment in your email.

The manual is 13,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon xeed sx800

Canon xeed sx800 User Manual - German - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info