215651
108
Zoom out
Zoom in
Previous page
1/168
Next page
Setting Various Function
108
Extending the Menu Display Time
[Other settings] - [Menu display time]
You can extend the menu display time,
which is 30 seconds usually, to 3 minutes.
Press the OK button to accept your setting
and then press the MENU button.
[Normal] is the factory default.
You cannot extend the display time for
the window indicating the completion of
Auto setup (P53), the guide window
(P106), the lamp replacement window
(preparation) (P145), or the lamp
replacement window (warning) (P145).
You cannot use the button holding oper-
ation except when you adjust the image
size (P58) or focus (P59).
Setting a Password
[Other settings] - [Password settings]
Disables the projector unless the correct pass-
word is entered.
Press the OK button to accept your setting and
then press the MENU button.
[Off] is the factory default.
You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the password entry
screen appears at power-on.
Enter a 4-digit password with [ ] / [ ] / [<] / [>].
If the password is valid, the projection starts. If
you enter a wrong passwords three times, the
power will be turned off.
The power is also turned off if no password is
inputted for 3 minutes.
HDMI COMPONENT
DIGITAL PC
VIDEO/S-VIDEO
ANALOG PC USB
Normal The menu is displayed for 30 sec-
onds.
Extended The menu is displayed for 3 minutes.
Other settings
System settings
Menu display time
HDMI COMPONENT
DIGITAL PC
VIDEO/S-VIDEO
ANALOG PC USB
Off The projector can be used even if no pass-
word is entered.
On The projector cannot be used unless you
enter your password.
Other settings
System settings
Password settings
<
<
To Cancel the Password
Turn off the projector and unplug the power
plug. Hold down the MENU button on the top
control and connect the power plug. Make
sure to keep holding down the MENU button
until a beep sounds. The password is can-
celled (the registered password is also reset).
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon xeed sx800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon xeed sx800 in the language / languages: English as an attachment in your email.

The manual is 13,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon xeed sx800

Canon xeed sx800 User Manual - German - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info