215651
103
Zoom out
Zoom in
Previous page
1/168
Next page
103
Setting Up Functions from Menus
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an items you want to enable
in the auto setup function.
SX80 MarkII
Select [On] for the items if you want to
enable in auto setup function.
Press the OK button to accept your setting
and then press the MENU button.
The factory default settings are as follows:
[Auto focus*]: [On]
[Auto keystone]: [On]
[Auto input]: [On]
[Auto screen color*]: [Off]
You cannot change any items in [Auto
setup] if [16:9 D. Image shift] is selected
for [Screen aspect]. In addition, you can-
not perform the auto setup function. For
the details of the [Auto setup], refer to the
page 52.
* is only applicable to SX80 MarkII
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector auto-
matically for saving power.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
The POWER indicator flashes red and
green when the projector is in the
[Standby] power management mode.
You cannot enable the [Direct power on]
function (see the next item), if you select
[Off].
HDMI COMPONENT
DIGITAL PC
VIDEO/S-VIDEO
ANALOG PC USB
Auto focus* Enables the auto focusing.
Auto keystone Enables the auto keystone cor-
rection.
Auto input Enables the auto input selection.
Auto screen
color*
Adjusts color quality of images
corresponding to the color of
the projection screen.
Auto setup
System settings
HDMI COMPONENT
DIGITAL PC
VIDEO/S-VIDEO
ANALOG PC USB
Off Disables the power management
mode.
Standby If no input signal is received for 30
seconds, the projector enters the
standby mode, turning off the lamp
five minutes after start of countdown.
If it receives the input signal or is oper-
ated during such period of 30 sec-
onds, it resumes projection.
Exit If no input signal is received for 30
seconds, it displays the count down
and turns off the projector after 5 min-
utes.
Power management mode
System settings
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon xeed sx800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon xeed sx800 in the language / languages: English as an attachment in your email.

The manual is 13,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon xeed sx800

Canon xeed sx800 User Manual - German - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info