709267
108
Zoom out
Zoom in
Previous page
1/144
Next page
Connecting to an External Monitor
108
NOTES
The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminals simultaneously.
The time code signal will not be output from the SDI OUT terminal when slow & fast motion recording is
activated.
You can set > [3 Recording Setup] > [Rec Command] to [i On] to use the camcorder’s REC
button to control also the recording operation of an external recorder compatible with recording commands
connected to the SDI OUT terminal.
Using the HDMI OUT Terminal
The digital signal that is output from the HDMI OUT terminal includes the video signal and audio signal. You can
output also the time code signal and the camcoder's onscreen displays (A 120).
The audio output signal will be 2-channel linear PCM audio (16-bit, 48 kHz sampling). When recording or playing
back clips recorded with 4-channel audio, you can select which audio channels to output (A 110).
1 u only: Select [Output Terminal].
> [£ ! Display Setup] > [Output Terminal]
2Select [ù HDMI] and then select [L].
3 Select [HDMI Max Resolution].
> [£ ! Display Setup] > [HDMI Max Resolution]
4 Select the desired option and then select [L].
5 mode only: To output the time code signal, select [HDMI Time Code].
> [3 # Recording Setup] > [HDMI Time Code]
6Select [i On] and then select [X].
NOTES
u The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminals
simultaneously.
The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on
an external device, as this may damage the camcorder.
Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.
Video may not be output correctly depending on the monitor. u In such case, try using the SDI OUT
terminal.
If the connected monitor is not compatible with the signal output from the camcorder, HDMI output will stop.
You can set both > [3 Recording Setup] > [Rec Command] and [HDMI Time Code] to [i On] to
use the camcorder's REC button to control also the recording operation of an external recorder compatible
with HDMI recording commands connected to the HDMI OUT terminal. The camcorder's time code signal will
be output as well.
The time code signal will not be output from the HDMI OUT terminal in the following cases:
-In mode.
- When the video output signal is 720x576 / 50.00P.
- When slow & fast motion recording is activated.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XA55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XA55 in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XA55

Canon XA55 User Manual - German - 153 pages

Canon XA55 Quick start guide - Dutch - 43 pages

Canon XA55 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info