709267
74
Zoom out
Zoom in
Previous page
1/144
Next page
Setting the Time Code
74
Setting the Time Code
The camcorder generates a time code signal and records it with the recorded clips. The time code signal is
output from the SDI OUT terminal (u only) and can be output also from the HDMI OUT terminal (A 108).
Selecting the Time Code Mode
1 Select [Time Code Mode].
> [3 # Recording Setup] > [Time Code Mode]
2 Select the desired option and then select [X].
Options
Setting the Time Code Running Mode
If you set the time code mode to [ Preset], you can select the time code running mode.
1 Select [Time Code Running Mode].
> [3 # Recording Setup] > [Time Code Running Mode]
2 Select the desired option and then select [X].
Options
Setting the Time Code’s Initial Value
If you set the running mode to [ Preset], you can set the initial value of the time code.
1 Select [Initial Time Code].
> [3 # Recording Setup] > [Initial Time Code]
The time code setting screen appears with an orange selection frame indicating the hours.
Select [Reset] to reset the time code to [00:00:00:00] and return to the previous screen. If the running mode
is set to [ Free Run], the time code will be reset the moment you select the button and keep running
continuously from 00:00:00:00.
2 Select [Í] or [Î] to set the value for the hours and then select the minutes field.
Change the rest of the fields (minutes, seconds, frame) in the same way.
Operating modes:
[ Preset]: The time code starts from an initial value you can select in advance. The default initial time
code is 00:00:00:00. See the following procedures to select the time code running mode and
set the initial time code.
[ Regen.]: The camcorder will read the selected SD card and the time code will continue from the last
time code recorded on the card. The time code runs only while recording so clips recorded
consecutively on the same card will have continuous time codes.
[ Rec Run]: The time code runs only while recording so clips recorded consecutively on the same card will
have continuous time codes.
[ Free Run]:The time code starts running the moment you confirm the selection and keeps running
regardless of the camcorder’s operation.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XA55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XA55 in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XA55

Canon XA55 User Manual - German - 153 pages

Canon XA55 Quick start guide - Dutch - 43 pages

Canon XA55 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info