709266
38
Zoom out
Zoom in
Previous page
1/144
Next page
Recording Video and Photos
38
To record video
4Press the REC button to begin recording.
During recording, Ü (in red) will appear on the screen. Additionally, if the handle unit is attached to the
camcorder, the tally lamp will illuminate.
You can also press the REC button on the handle unit or the START/STOP button on the supplied wireless
controller.
5Press the REC button again to stop recording.
Ü will change to Ñ (in white) and the clip will be recorded on the card selected for recording clips. The tally
lamp will also go out.
To take photos
4 During record standby mode, touch [PHOTO].
By default, the [ Photo] function is assigned to the onscreen assignable button, but you can change
the assigned function if necessary (A 94).
A green g icon will appear at the bottom of the screen. Also, at the upper right of the screen, will
appear with the icon of the card selected for recording photos.
You can also press the PHOTO button on the supplied wireless controller.
When you have finished recording
1 Set the lens barrier switch to CLOSED to close the lens barrier.
2 Make sure that the ACCESS indicator is off.
3 Set the power switch to OFF.
4 Close the LCD panel and return the viewfinder to its retracted position.
IMPORTANT
Be sure to save your recordings regularly (A 113), especially after making important recordings. Canon shall
not be liable for any loss or corruption of data.
NOTES
NOTES
The REC button on the handle unit has a lock lever to prevent accidental operation. Set the lock lever to C in
cases such as when you do not want a recording inadvertently paused or do not plan to use this REC button.
Return the lever to its previous position to enable use of the REC button again.
The maximum continuous recording time of a single clip is 6 hours. After that, a new clip will be created
automatically and recording will continue as a separate clip.
When recording in bright places, it may be difficult to use the LCD screen. In such case, use the viewfinder or
adjust the brightness of the screen (A 22).
A video recording will be saved as separate clips in the following cases:
- When the camcorder switches to the other SD card while recording video due to the relay recording function
(A 34).
- When recording clips on an SDHC card, the video (stream) file in the clip will be split approximately every
4 GB. Playback with the camcorder will be continuous.
After saving the separate split clips to a computer, you can use MP4 Join Tool to join the files and save them
as a single clip (A 113).
Recording photos:
- Photos are recorded as JPG files. Photos can be recorded only in record standby mode.
- Photos cannot be recorded when pre-recording is activated.
When you need to record for a long time with the camcorder set on a tripod, you can close the LCD panel and
use only the viewfinder in order to save power when using a battery pack (A 22).
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XA50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XA50 in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XA50

Canon XA50 User Manual - German - 153 pages

Canon XA50 Quick start guide - Dutch - 43 pages

Canon XA50 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info