543009
86
Zoom out
Zoom in
Previous page
1/184
Next page
Recording Audio
86
NOTES
Even if you select [ INPUT 1], the audio recording level will be determined by the audio level
switch and dial for INPUT 2.
If you select [ Built-in Mic/MIC], the camcorder will record monaural sound. In such case,
[ Audio Scene] will be set to [ Standard].
Audio Recording Level (INPUT Terminals)
You can set the audio recording level for audio input to automatic or manual independently for each
channel. Furthermore, when you adjust the audio recording level manually, you can set the level (from
G to 18 dB) independently for each channel, as well.
1 Set the audio level switch of the desired channel to A
(automatic) or M (manual).
If you set the switch to A, the audio level will be adjusted
automatically and you do not need to perform the rest of
the procedure. If you set the switch to M, continue the
procedure to set the audio recording level.
2 Turn the corresponding audio level dial.
For reference, MIN refers toG, the larger mark in the
middle of the dial corresponds to 0 dB, and MAX
corresponds to +18 dB.
As a guideline, adjust the audio recording level so that the
audio level meter will go to the right of the 18 dB mark (one
mark right of the 20 dB mark) only occasionally.
NOTES
When the audio level meter reaches the red point (0 dB), the sound may be distorted.
If the audio level meter display is normal but the sound is distorted, activate the microphone's
attenuator (A 87).
We recommend using headphones to check the sound level while adjusting the audio recording
level or when the microphone attenuator is activated.
When using automatic adjustment, if both INPUT 1 and INPUT 2 are set to the same audio input
(external microphone or external line input), you can use the p > [INPUT 1/2 ALC Link] setting
to link the audio level adjustment of both channels.
If at least one of the channels is set to manual adjustment, you can activate the audio peak limiter
with the p > [INPUT 1/2 Limiter] setting. When activated, appears on the screen and the
audio peak limiter will limit the amplitude of audio input signals when they exceed -6 dBFS.
Adjusting the Microphone’s Sensitivity (INPUT terminals)
You can adjust the sensitivity of the input of the INPUT 1 and INPUT 2 terminals.
POINTS TO CHECK
Set the sensitivity switch of the desired INPUT terminal to MIC or MIC+48V.
COPY
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon XA 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon XA 20 in the language / languages: English as an attachment in your email.

The manual is 18,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon XA 20

Canon XA 20 User Manual - German - 190 pages

Canon XA 20 User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info