630615
48
Zoom out
Zoom in
Previous page
1/185
Next page
48
[Auto]
Automatically uses haze compensation.
(11)[Day/Night]
Set Day/Night mode to [Auto], [Day Mode] or [Night
Mode] when the camera starts.
You can also switch between [Day Mode] and [Night
Mode] using the Day/Night mode function of the
Admin Viewer (p. 144).
Note
Focusing may be difficult for the following types of subjects
when [Focus] is set to [Auto] or [One-shot AF].
Subjects Difficult to Focus On
After rebooting the camera, it is recommended that you check
whether the camera is focusing correctly.
The focus ranges (approximate) are shown in the table below.
Camera Control
(1) [Digital Zoom]
Set digital zoom to [Disable] or [Enable].
The higher the digital zoom ratio, the lower the video
quality becomes.
(2) [AGC Limit]
Select one of 5 levels from 1 to 5 to automatically set
the upper gain limit. The greater the value, the higher
the sensitivity becomes. If you do not want to use the
automatic gain adjustment, select [OFF]. Setting
[AGC Limit] allows you to reduce noise when
capturing video in low illumination.
(3) [Smart Shade Control Strength (Auto)]
Select [Mild], [Medium], or [Strong] for the control
strength when [Smart Shade Control] (p. 47) is set to
[Auto].
Important
The initial camera settings (1) to (11) define the defaults that
apply when the camera is started. Setting changes will be
reflected only after the camera is reconnected or rebooted.
Specify the settings used in the actual operating environment
from the Admin Viewer (p. 141).
If the subject is a traffic signal or electronic scoreboard, etc.,
the captured video may flicker.
In this case, try changing the [AE Mode] setting to [Auto
(Shutter-priority AE)] and selecting a shutter speed lower
than 1/100 to see if the problem improves.
Even if [AE Mode] is set to [Auto (Flickerless)] or [Auto
(Flickerless 2)], some screen flicker may still occur under
unstable light source conditions.
Setting a slow shutter speed may make it impossible for
intelligent functions to work correctly. Select a shutter speed
that suits the capture conditions and purpose.
In conditions where an outdoor scene is captured
from an indoor location through a glass window, the camera
may focus on the glass surface if there is dust or water there.
Install the camera at the shortest possible distance from the
glass surface.
[Smart Shade Control] cannot be used if [Haze
Compensation] is set to [Auto] or [Manual].
[Haze Compensation] cannot be used if [Smart Shade
Control] is set to [Auto] or [Manual].
If [Auto] is selected for [Day/Night], conduct a thorough
operation test to check the effectiveness of the setting
beforehand.
If [Auto] is selected for [Day/Night], set [Exposure] of the
Admin Viewer to [Auto], [Auto (Flickerless)], [Auto
(Flickerless 2)] or [Auto (Shutter-priority AE)] (p. 143).
However, when [Auto (Shutter-priority AE)] is being used,
night mode may not be activated even if [Day/Night] is set to
[Auto], depending on the shutter speed.
Though the camera has an infrared filter, there is no effect on
lighting due to infrared light as the camera does not have an
insertion/removal mechanism for the filter.
The Day/Night Mode can be switched manually via the Day/
Night function of the Admin Viewer (p. 144), or via the
[External Device Input] (p. 61) or [Timer] (p. 62) settings in
[Setting Page] > [Event].
A white wall or other
subject lacking
bright/dark contrast
A slanting
subject
A subject
reflecting
strong light
A subject consisting
of only slanted lines
or horizontal stripes
A subject having
no form, such as
flame or smoke
A subject seen
through glass
A fast moving
subject
A dark area or
night view
Subjects both
near and far
Focus Mode
Fixed at infinity
Auto
Day Mode/Night Mode
0.3 m (12 in.) infinity 0.3 m (12 in.) infinity
Max. Wide-angle Max. Telephoto
Focused at infinity
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-S31D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-S31D in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-S31D

Canon VB-S31D User Manual - German - 185 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info