630614
144
Zoom out
Zoom in
Previous page
1/185
Next page
144
Setting White Balance
(1) [Auto]
The white balance is adjusted automatically.
(2) [Light Source]
Select the light source from the pull-down menu below
according to the condition in which the camera is
used.
For an explanation on each item set in [Light Source],
see [White Balance] in the Setting page (p. 47).
(3) [Manual]
The white balance is adjusted manually.
[One-shot WB]
This is used for forcibly locking the white balance to
match the light source.
Example of setting method:
Illuminate a white subject (white paper, etc.) using
the light source, making sure the subject fills the
entire screen, and then execute [One-shot WB].
[R Gain], [B Gain]
When setting the white balance manually, set the
values of red and blue gain in the range 0 to 1023 to
match the light source.
Setting the Day/Night Mode
(1) [Auto]
The camera automatically switches to day mode or
night mode depending on ambient brightness.
(2) [Day Mode]
Color video can be viewed in the normal mode.
(3) [Night Mode]
Video is shown in black and white.
Note
Though the camera has an infrared filter, there is no effect on
lighting due to infrared light as the camera does not have an
insertion/removal mechanism for the filter.
[Exposure Compensation] and [Manual] for [Exposure]
cannot be selected if [Smart Shade Control] is set to [Auto].
Even if [Exposure] is set to [Auto (Flickerless)] or [Auto
(Flickerless 2)], some screen flicker may still occur under
unstable light source conditions.
When [Camera] > [Camera Control] > [AGC Limit] is set to
[OFF] in the setting page and [Exposure] is set to [Auto
(Shutter-priority AE)], exposure compensation and backlight
compensation will not be performed.
(1)
(2)
(3)
Important
Since the light source selection options are based on
representative characteristics, proper colors may not be
achieved depending on the applicable light source. In this
case, use the [One-shot WB] function.
If the subject looks greenish under mercury lamps in the
[Auto] mode, select the [Mercury Lamp] mode under light
source. If the video is still not shown in appropriate colors
under mercury lamps when the [Mercury Lamp] mode is
selected under light source, use [One-shot WB].
When the subject has only one color, illumination is low, or
when sodium lamps, mercury lamps and certain other
fluorescent lighting are used, colors may not be adjusted
appropriately.
When [Day/Night] is set to [Night Mode] (including when it is
set to [Auto] and night mode is judged to be applicable), the
white balance function cannot be used.
Notes on capturing video continuously day and night
If a subject that seldom changes is captured in a location
where the light source changes gradually, such as when
capturing a subject continuously day and night, appropriate
colors may not be achieved.
In the above case, applying changes to the video to capture
will achieve the appropriate colors.
Important
If the viewer is exited in [Day Mode] or [Night Mode], auto day/
night stays disabled even if [Auto] is set in the setting page. To
set auto day/night to enable, be sure to exit the viewer after
setting [Auto].
(2)
(3)
(1)
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-S30D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-S30D in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-S30D

Canon VB-S30D User Manual - German - 185 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info