630614
77
Zoom out
Zoom in
Previous page
1/185
Next page
77
3
Setting Page
Device Information
[Model Name], [Firmware Version], [Serial Number], [Build
Number], [MAC address]
Displays information about the currently connected camera.
Tool
(1) [View Logs]
Display a history of camera operations and
connections to each viewer, etc.
(2) [View Current Settings]
Display a list of current settings.
(3) [Reboot]
The camera is rebooted.
The camera angle will return to the home position. If a
home position has not been registered, the camera
will return to the factory default home position setting.
See p. 98 for details on registering a home position.
(4) [Restore Default Settings]
Except for the following items, all user-defined
settings will be discarded and restored to factory
default settings after the camera is rebooted.
Administrator password
Network LAN, IPv4, IPv6
Date and time
Host access restrictions for access control
–SSL/TLS
–802.1X
(5) [Back Up Settings]
Back up all settings, other than the date and time, to a
memory card.
The IP address, SSL or 802.1X certificates, and
private key files are also backed up.
(6) [Restore Settings]
Restore all settings, other than the date and time, from
a backup file on a memory card.
The IP address, SSL or 802.1X certificates, and
private key files are also restored.
The camera reboots after settings are restored.
Note
It is recommended that you back up all current setting values
before restoring factory default settings in [Restore Default
Settings].
The camera can be restored to factory default settings using
the reset switch as well. Note, however, that this will reset all
camera settings to factory default settings except for date and
time (p. 168).
Log Notifications
(1) [Use log notifications]
Set log notifications to [Disable] or [Enable]. Log
messages, such as when errors occur, can be sent by
e-mail when [Enable] is selected.
[Maintenance]
Viewing Current Settings, Event Logs and Performing Maintenance
The following items can be used here.
Device Information
Display information about the current device.
•Tool
Display or Initialize Camera Settings, and Back
Up/Restore Settings.
Log Notifications
Set log message mail notifications.
Caution
You must not turn off the camera while it is
performing the [Restore Default Settings], [Back Up
Settings] or [Restore Settings] operation. Turning
off the camera at this stage may result in making it
unable to boot correctly.
Important
If the restored settings were backed up from a different
camera, note that an address conflict on the network may
occur.
When restoring settings on a camera, do not use backup files
that were created with firmware versions newer than that of
the camera.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-S30D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-S30D in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-S30D

Canon VB-S30D User Manual - German - 185 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info