683271
255
Zoom out
Zoom in
Previous page
1/287
Next page
Appendix
7
255
The camera cannot be controlled. If you connect the Admin Viewer as an administrator, you will have exclusive
possession of the camera control privileges. If you connect to the Admin Viewer as an
Authorized User, you cannot control the camera unless the administrator releases
camera control. Consult the Administrator (P. 138).
The viewer gets disconnected. Check the network and computer for abnormality.
Reboot the computer and connect again.
You forgot your password. You can initialize all settings of the camera excluding date and time using the reset
switch (P. 270). The administrator password required for initialization is “camera”.
Note, however, that network settings such as the IP address and subnet mask will be
initialized and must be set again.
Data cannot be uploaded. Check that the upload destination of [Video Record] > [Upload] and the upload
operation upon an event of the [Event] menu are both set correctly.
You can perform an operation check based on the currently set upload destination by
running a test from the [Upload] menu (P. 99).
Check [Maintenance] > [Tool] > [View Logs] or logs on the server to check the detailed
operating environment. For details on [View Logs], please refer to “Uploader error”
(P. 259), “Uploader warning” (P. 262), or “Uploader notification” (P. 265) of “List of Log
Messages”. Also please refer to “Important” on P. 96.
For the server settings, contact your System Administrator.
Video cannot be recorded on an memory
card.
To record video to an memory card when an event occurs, check the [Video Record
Action] settings under [Video Record] > [Memory Card] >[Video Record Setting] in
the Setting Page. When [Video Record Action] is set to [Upload], change it to [Record
to Memory Card].
When recording-mode stream video that could not be transmitted due to network
errors or video for which the HTTP/FTP upload failed is not stored on the memory card,
check [Operation Settings] under [Video Record] > [Memory Card] > [Memory Card
Operations] in the Setting Page. When [Operation Settings] is set to [Save Log],
change it to [Save Logs and Videos].
To manually save recordings to an memory card, obtain camera control privileges.
Files cannot be saved in the Setting Page or
Admin Tools.
Windows prohibits saving to certain folders. Accordingly, an attempt to save a file may
fail. Specify [Documents], [Pictures] and other folders.
A message indicating “Cannot access the
memory card. Please recreate the video
management information on the Setting
Page” appears when Recorded Video Utility
is launched.
Select [Memory Card Information] under [Video Record] > [Memory Card] in the
Setting Page to check [Video Management Information Status]. When [Video
Management Information Recreation Required] is displayed, click [Exec] in [Recreate
Video Management Information] under [Memory Card Operations]. When video
management information has been recreated, make sure that [Video Management
Information Status] is [Normal].
It takes a long time for the Recorded Video
Utility to display the video list.
When a large number of files have been recorded onto a memory card, the Recorded
Video Utility can take a considerable amount of time to process the video list (the
greater the number of files, the longer it will take). Please reduce the number of days
saved in [Auto Video Delete], or manually delete unneeded files with the Recorded
Video Utility, on a regular basis.
The number of files saved on the memory card can greatly be reduced, by using
H.264 as the video format, instead of JPEG.
Problem Countermeasures
255


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-R11VE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-R11VE in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info