683320
131
Zoom out
Zoom in
Previous page
1/258
Next page
Setting Page
5
115
Configuring View Restrictions
Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer.
Note
To delete view restriction settings, select [Disable], and click [Apply].
Operate the camera angle using the frame on the video display area or the panorama screen/full-view screen to
get the positioning value, and specify the restrict view area.
[Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit]
Operate the camera angle to the upper limit, lower limit, left limit, and right limit to set in the video display area.
Click [Get value] in each position to reflect the values to the pan/tilt preview frame.
Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] to move the preview frame to the upper
limit, lower limit, left limit, and right limit of the current pan/tilt preview frame, respectively, and display it in the
video display area.
[Telephoto]/[Wide-angle]
Operate the camera angle to the wide-angle/telephoto limit to set, using the frame on the video display area or
the panorama screen.
Click [Get value] in each position to reflect the values to the wide-angle preview frame/telephoto preview frame.
Click [Preview] in [Telephoto]/[Wide-angle] to move the preview frame to the telephoto/wide-angle limit of the
current wide-angle preview frame/telephoto preview frame and display it in the video display area.
You can also set the telephoto/wide-angle limit range by directly moving the operation knob on the zoom slider up
and down. This also moves each preview frame to the telephoto/wide-angle limit of the current wide-angle
preview frame/telephoto preview frame and displays it in the video display area.
If you dragged the telephoto knob to the upper limit and the wide-angle knob to the lower limit, the view restriction
is disabled for each edge (there is no restriction).
Important
If you have changed how the camera is installed, reconfigure the view restriction settings.
Check view restrictions again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page.
When [Camera] > [Camera] > [Camera Control] > [Digital Zoom] or [Image Stabilizer] ( ) is changed on the Setting Page, check
the view restriction settings again.
HM4x
1
Select [Enable] in [View Restrictions].
2
Set the restrict view area using the frame on the video display area or the panorama screen/full-view screen.
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-M741LE-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-M741LE-H in the language / languages: English as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info