683320
116
Zoom out
Zoom in
Previous page
1/258
Next page
100
If you select [Do Not Register], the camera angle will move to the home position the next time it is booted. If you have not
specified the home position, the camera angle will move to the factory default setting. For information on specifying the
home position, please refer to P. 118.
Note
When [Digital PTZ Position] is set to [Do Not Register], you can perform pan, tilt, and zoom operations on the video display area using Area
Zoom (P. 58).
[Digital PTZ Position]
Register the current digital PTZ position as the initial setting.
If you select [Register], a yellow frame is shown in the video display area. Operate the frame to specify the Digital PTZ trim
position during startup.
Note
The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 65).
Camera Settings
Sets the camera settings at camera start up.
[Simple Camera Settings]
Recommended settings for [Camera Settings] are displayed according to the selected type (The table below shows the
items and their differing recommended values). You can also change the recommended settings as required and click
[Apply].
Type Motion Priority
Depth Priority
Low Light Visibility
Data Size
Reduction
Standard Settings
Usage scenario
Reduces
vibrations for
moving subjects.
Focuses within a
wide range, from
near to far.
Brightens by
raising the
sensitivity for dark
subjects.
Reduces the data
size in low-light
conditions.
Cancels the
scenario settings
and restores the
factory default
settings.
[Exposure] Auto
Auto (Aperture-
priority AE)
Auto Auto Auto
[AGC Limit]66646
[Shutter Speed
Limit (Lower)]
1/1000 (sec.)
1/250 (sec.)
1/30 (sec.) 1/8 (sec.) 1/8 (sec.) 1/30 (sec.)
[Shutter Speed
Limit (Upper)]
1/16000 (sec.) 1/16000 (sec.) 1/16000 (sec.) 1/16000 (sec.) 1/16000 (sec.)
[Smart Shade
Control]
Disable Disable Disable Disable Disable
[Noise Reduction] Mild Standard Strong Strong Standard
[Sharpness]36333
[Color Saturation]44424
[Haze
Compensation]
Disable Disable Disable Disable Disable
S30 S31
HM4x
S30 S31
HM4x
H730
HM4x
H730
S30 S31
S80x
S90x
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-M741LE-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-M741LE-H in the language / languages: English as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info