683274
87
Zoom out
Zoom in
Previous page
1/287
Next page
Setting Page
4
87
Settings for audio input from the microphone connected to the camera and audio output from the Viewer. The output sound
clip used when an event is triggered can also be registered.
This [Audio Settings] submenu is common with the [Audio Settings] submenu found in the [Event] menu.
Settings configured in any page will be reflected in the other pages.
General Sound
Set the audio input/output volume, echo cancellation and microphone type.
[Input Volume]
Enter the input volume from the microphone connected to the camera.
This can be set when [Server] > [Audio Server] > [Audio Transmission from the Camera] (P. 92) is set to [Enable].
[Output Volume]
Enter the output volume from the Viewer to the speaker connected to the camera.
This can be set when [Server] > [Audio Server] > [Audio Reception from Viewer] (P. 92) is set to [Enable].
[Echo Canceller]
Select to enable or disable the Echo Canceller for suppressing echoes that occur between the microphone and speaker.
This can be set when [Server] > [Audio Server] (P. 92) is set to the following.
[Audio Transmission from the Camera] is set to [Enable]
[Audio Reception from Viewer] is set to [Enable]
[Audio Input]
Select the type of microphone connected to the camera.
Set Audio Input/Output
[Video and Audio] > [Audio Settings]
Important
Video and audio can be distributed to up to 30 clients. However, when there are many clients or they are connected to the camera over
an SSL connection, the video frame rate may slow down and the sound may drop out if audio reception from the camera is enabled.
The video and audio may not be synchronized.
If the [Input Volume] or [Echo Canceller] setting is changed after setting volume detection (P. 107) or scream detection (P. 108), check
the detection setting again.
The audio may be temporarily interrupted, depending on the performance of the computer and the network environment.
The audio may be interrupted if anti-virus software is enabled.
Communication may be temporarily interrupted, cutting off the audio, if the LAN cable is unplugged and plugged in again. If this
occurs, reconnect from the Viewer.
The volume, sound quality, etc., may change depending on the characteristics of the microphone used.
Use a speaker with an amplifier to connect to the camera (“Installation Guide” > “Audio Input/Output Terminals”).
Important
Use of the Echo Canceller may affect audio quality and volume. Use it when necessary to suit the installation environment and camera
usage.
R11
M641
M741
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-M641VE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-M641VE in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-M641VE

Canon VB-M641VE User Manual - English - 258 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info