683275
51
Zoom out
Zoom in
Previous page
1/258
Next page
Camera Setup
2
35
To use a camera, it is necessary to first set the administrator account for the camera, then configure the network settings,
and then connect the camera and computer via the network. Use the Camera Management Tool to configure these settings.
The Camera Management Tool also enables multiple cameras to be configured at the same time.
For information on how to use the Camera Management Tool, please refer to the “Camera Management Tool User Manual”.
Flow of Configuration Using the Camera Management Tool
Launching the Camera Management Tool
Searching for Cameras
Search for cameras connected to the same network as the computer in which the Camera Management Tool is installed.
Registering the Administrator Account (Administrator Name and Administrator Password)
Configuring Initial Camera Settings
Configure the basic settings of the camera, such as the network settings and camera name.
Setting up the network without a DHCP server
Cameras with the factory default settings are configured to obtain an IP address from the DHCP server. Detect the camera
using the Camera Management Tool with a DHCP environment or an IPv6 environment.
However, you can access a camera connected to a network environment without a response from the DHCP server by
entering a specific IP address (192.168.100.1) in a web browser.
The [Default Settings] top page will be displayed.
After the camera reboots, the Setting Page is displayed and you can configure the settings.
Configuring Initial Camera Settings
Important
You can only access a camera 30 seconds after connecting the camera to the network environment without a response from the DHCP
server using the 192.168.100.1 IP address.
If there is a response from the DHCP server after 30 seconds has elapsed, the camera switches to the address assigned by the DHCP
server.
When accessing a camera by entering 192.168.100.1 in a web browser, set the computer to an IP address with the same subnet
(255.255.255.0).
If multiple cameras with the factory default settings exist on the same network, the cameras cannot be accessed.
1
Launch the web browser.
2
Enter 192.168.100.1, and press the Enter key.
3
Enter the administrator name and administrator password, and click [Apply].
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-M641V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-M641V in the language / languages: English as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-M641V

Canon VB-M641V User Manual - English - 287 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info