683292
164
Zoom out
Zoom in
Previous page
1/193
Next page
164
Before contacting the dealer where you purchased the product or Canon's Customer Service Center, check the items
specified as follows. If a log message is displayed, check the details of the message and corresponding countermeasure in
the log message list.
Note
For details on troubleshooting for Camera Management Tool, please refer to the “Camera Management Tool User Manual”.
Troubleshooting
Problem Countermeasures
The camera does not start. If you are using a PoE hub, check if the LAN cable is connected correctly.
If you are using an AC adapter (sold separately), check if the AC adapter is
connected correctly.
Turn the camera off and on again (see “Installation Guide” > “Connecting the
Camera”).
Camera Angle Setting Tool does not operate.
Check if the LAN cable is connected correctly.
Check if the camera and the PC in which the Camera Angle Setting Tool is operating
are connected to the LAN in the same segment.
“Application could not be started. Install .NET Framework x.x (x is the version).” If this
message is displayed, install the corresponding version of .NET Framework or enable
settings (p. 18).
Check if you are using an older version of the Camera Angle Setting Tool.
The top page of the camera is not displayed. Check if the LAN cable is connected correctly.
Check if the network to which the camera is connected is set up correctly. In
particular, check if the IP address, subnet mask and default gateway address are set
within the ranges supported by the applicable network.
If you have changed the IP address, the new address will not become effective until
the camera is rebooted.
Check if the correct URI (camera IP address) is entered in your web browser (p. 29,
p. 136).
Check whether the connection is from a computer whose access is blocked in
[Access Control] on the Setting page.
Check the authentication method, [User Name], [Password], combination of
certificates, and network rules for connection in [802.1X] on the Setting page with the
system administrator.
The Admin Tools will not start.
The Admin Viewer will not start.
“Your web browser is not supported.” If this message is displayed, use Internet
Explorer 8 or greater.
"Application could not be started. Install .NET Framework x.x (x is the version)." If this
message is displayed, install the corresponding version of .NET Framework or enable
settings (p. 18).
“JavaScript is not available or disabled on your web browser.” If this message is
displayed, set [Active Script] to [Enable] in Internet Explorer's security settings. (See
(3) below for instructions on how to set this.)
“The settings from (1) to (3) below must be carried out to use the Admin Viewer and
Admin Tools.” If this message is displayed, set the following.
(1) Use the installer to install your Admin Tools Certificate (p. 26).
(2) When using Internet Explorer 9 or greater, follow the steps in “Registering the
IP address of the Camera as a Trusted Site” (p. 19) and add this web site to
[Trusted sites] in Internet Explorer's security settings.
(3) In Internet Explorer click [Tools] > [Internet Options] > [Security] > [Custom
level] and under the Security Settings list, set [XAML browser applications],
[File download] and [Launching programs and files in an IFRAME] to [Enable].
Video is not displayed. To improve video quality, refer to “[Video] Setting Video Size, Quality and Frame Rate”
(p. 59) in “Chapter 4 Setting Page” to change settings and make adjustments.
Up to 30 viewers can access the camera at the same time. If this limit has been
exceeded, video is not displayed and a message appears.
When you are using Internet Explorer 10 or 11 in a 64-bit operating system and the
camera is registered as a trusted site and protected mode is enabled, reception and
playback of H.264 video may be disabled. If this occurs, disable protected mode.
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-M42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-M42 in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-M42

Canon VB-M42 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info