683316
217
Zoom out
Zoom in
Previous page
1/258
Next page
Setting Page
5
201
You can save/restore all the camera settings.
Backup / Restore
Configure the settings regarding backup and restoring.
[Save Destination]
Select the destination for saving the camera settings when backing up.
[Back Up Settings]
All settings, except date and time, will be backed up. The administrator account, certificates used by SSL/TLS and 802.1X
and private key will also be backed up.
[Restore Settings]
Restores all settings, except date and time, from the backup file created with [Back Up Settings].
If [PC] is selected in [Save Destination], click [Browse] to specify the backup file.
The administrator account, IP address, certificates used by SSL/TLS and 802.1X and private key will also be restored.
After restore is completed, the camera will be rebooted.
[Encryption Password]
Set the password to use when backing up and restoring. This is the password for encrypting the backup data itself.
When restoring from encrypted backup data, enter the password set when backing up.
Note
The settings are not restored if the password set when backing up and the password set when restoring do not match.
[Maintenance] > [Backup / Restore]
Saving/Restoring Camera Settings
Caution
You must not turn off the camera while [Back Up Settings] or [Restore Settings] are in operation. Turning off the camera at
this stage may result in disabling its ability to boot correctly.
Important
Take care when restoring from the backup file of another camera, as problems such as not being able to connect to the camera may
occur due to the network address conflicting or the administrator password being overwritten.
When restoring the settings, do not use a backup file created with a firmware version newer than that of the camera to restore.
The following settings can be configured here.
Backup / Restore
217


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H761LVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H761LVE in the language / languages: English as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info