683291

Canon VB-H730F Manual

116
Zoom out
Zoom in
Previous page
1/193
Next page
116
Intelligent Function Settings
When you click [Add] in the [Detection Setting List],
the [New Detection Settings] dialog box is displayed.
Set the [Detection Setting Number] and [Detection
Type] of the detection setting you want to add, and
then click [OK].
Up to 15 different detection settings can be
registered.
(1) [Detection Setting Number]
Specify a detection setting number from 1 to 15 for the
detection area you want to set.
(2) [Detection Type]
Select detection types that suit your purpose from
[Moving Object Detection], [Abandoned Object
Detection], [Removed Object Detection], [Camera
Tampering Detection], or [Passing Detection]. For
details on detection types, see p. 111.
To enable detection settings, select [Enable these
detection settings].
Clear this checkbox to disable a setting.
Set detection criteria while operating the camera and
checking the image in the video display area.
Set e-mail notification, video record, and audio
playback to be performed upon detection.
Click [Save settings] to save the settings in the
camera.
You can check the detection status of the specified
detection settings in the event display panel (p. 156).
1
Add detection settings.
2
Enable Detection Settings.
3
Set detection criteria ([Detection Criteria] tab p. 117).
4
Set operations to be performed when a change in a
subject is detected ([Event] tab p. 118).
5
Save the detection settings in the camera.
6
Check the detection result.
(1)
(2)
Important
Notes on intelligent function settings and operation
• When setting intelligent function, do an actual detection test
to confirm that detection will be performed correctly.
• When the entire screen are exposed to sudden changes in
brightness, detection may not be performed as intended for
up to 5 minutes.
• If the display switches between Day mode and Night mode,
[Restarting intelligent function. Please wait.] is shown and
intelligent function will restart. Detection will not be performed
while intelligent function is restarting.
• If the camera is operated during intelligent function setting or
operation, [Restarting intelligent function. Please wait.] is
shown and intelligent function will restart. Detection will not
be performed while intelligent function is restarting.
• If [Video] > [Video Size Set] on the Setting page is changed,
be sure to change the preset position setting (VB-H43/
VB-M42 only) and intelligent function settings, and check the
operation. The intelligent function may not operate,
depending on the settings.
• Set intelligent function again if the angle of view is changed
through camera operation, or the camera position of a preset
or home position is changed using Preset Setting Tool.
• If [Status] in [Detection Setting List] is [Enabled] when the
camera position is fixed, control privileges cannot be
obtained by VB Viewer or RM Viewer. Also, the preset tour
and auto control of custom settings will no longer run.
• When using presets registered in digital zoom range, the
registered camera positions may not be reproduced with
high accuracy. It is recommended that you use presets
registered in the optical zoom range for the Intelligent
Function.
Difficult-to-detect Subjects
• Objects or portions where there is little contrast in color or
brightness with the background may not be detected.
• Small objects and changes on the screen may not be
detected.
• Partial or entire changes in light on the screen may trigger
detection.
• If multiple objects overlap, the detection status may change.
In particular, passing may not be detected or may be
detected at the wrong timing.
… 116 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H730F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H730F in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info