683313
176
Zoom out
Zoom in
Previous page
1/258
Next page
160
Audio Detection
Detects audio input to the camera. There are two types of detection.
These are set with [Event] > [Audio Detection] (P. 152), not with [Intelligent Function].
[Volume Detection]: Detects when volume level exceeds or falls below a reference volume.
[Scream Detection]: Detects screams or cries from people.
Notes on Intelligent Function Settings and Operations
When setting the Intelligent Function, do an actual detection test to confirm that detection will be performed correctly.
If a sudden change in lightness or darkness occurs within the entire screen, proper detection may not be possible for up
to five minutes.
Detection will not be performed while the Intelligent Function is restarting.
If the camera is operated while configuring or using the Intelligent Function, [Restarting intelligent function. Please wait.]
is displayed and the Intelligent Function will restart.
If the display switches between Day mode and Night mode, [Restarting intelligent function. Please wait.] is shown and
intelligent function will restart.
If [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page are changed, be sure to change the
preset position settings ( ) and Intelligent Function settings, and check operations. The Intelligent
Function may not operate, depending on the settings.
When the image is zoomed in (telephoto), detection may not work as expected.
Please set the Intelligent Function again if the angle of view has changed through camera operation, or the preset/home
position has changed.
If [Status] in [Detection Settings] has [Enable] when the camera position is fixed, control privileges cannot be obtained
by the Viewer connected by the user without privileges for privileged camera control or RM Viewer.
Also, the preset tour will no longer run.
If you use a preset registered with the digital zoom, the camera position at registration may not be able to be reproduced
with a high degree of accuracy. Therefore, it is recommended that you use a preset registered in the optical zoom area
for the intelligent function.
Difficult-to-Detect Subjects
The following subjects may not be detected, or may result in erroneous detection.
Objects or areas where there is little contrast in color or brightness with the background may not be detected.
Small objects and changes on the screen may not be detected.
Partial or entire changes in brightness on the screen may trigger detection.
When there are multiple overlapping objects, there may be a change in detection. For example, objects passing
may either not be detected or the timing of detection may be incorrect.
When there are large numbers of objects in the scene, objects may not be properly detected.
Registering Presets
It is strongly recommended that you register the camera angle as a preset in advance and lock the camera to that position
when using video detection. It is also recommended that the angle of view that captures targeted objects at a larger ratio be
used.
For details on preset registration, please refer to “[Camera] > [Preset] Registering Presets” (P. 118).
HM4x
S30 S31
HM4x
S30
S31
HM4x
S30
HM4x
HM4x
S30
HM4x
S30 S31
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H651VE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H651VE in the language / languages: English as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info