683313
134
Zoom out
Zoom in
Previous page
1/258
Next page
118
By registering settings as presets, such as camera angles and camera settings (e.g. exposure), the presets can be easily
called up by Viewers to apply the settings.
Using Presets
In addition to immediate execution of registered camera angles and the camera settings such as exposure when
operating the viewer, you can use presets as follows.
Execute the presets during switches between Day Mode and Night Mode (P. 180).
Automatically cycle through multiple presets at a set time and in a predetermined sequence (Preset Tour) (P. 121).
When using the Intelligent Function, lock the monitoring position at a preset camera angle (P. 161).
Registering a Preset
The camera angle and camera settings can be registered as a preset.
The number of presets you can register are as follows.
Maximum 65 presets (including the home position)
[Camera] > [Preset]
Registering Presets
Important
It is strongly recommended you register as presets, the positions Intelligent Function will use for the camera.
If you use a preset registered with the digital zoom, the camera position at registration may not be able to be reproduced with a high
degree of accuracy. Therefore, it is recommended that you use a preset registered in the optical zoom area for the preset tour (
only) and intelligent function.
Reconfigure the presets if you change the [Camera] > [Camera] > [Installation Conditions] > [Video Flip] (P. 98) settings on the Setting
Page.
Reconfigure the presets if you change [Video] > [All Videos] > [Video Size Set] (P. 91) settings on the Setting Page.
If you change the settings in [Camera] > [Camera Control] > [Image Stabilizer] on the Setting Page (P. 97), the angle of view when
using the camera will not match the angle of view when you configured presets. If you change [Image Stabilizer] settings, recheck the
preset settings.
If a separately sold indoor dome housing for the camera is used, be sure to set presets with the dome installed.
The following settings can be configured here.
Camera Settings
Register Preset
HM4x
S30
S31
HM4x
HM4x
S30
HM4x
HM4x
HM4x
H730 S80x
S90x
HM4x
S30 S31
HM4x
S30
S31
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H651VE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H651VE in the language / languages: English as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info