683289
64
Zoom out
Zoom in
Previous page
1/193
Next page
64
General Upload
(1) [Upload]
Select [Upload Disabled], [HTTP Upload] or [FTP
Upload] for the upload method.
(2) [Video Format]
Select the [JPEG] or [H.264(1)] format for video you
want to upload.
If [H.264(1)] is selected, video is uploaded with the
settings defined under [Video] > [H.264(1)] (p. 60).
[H.264(2)] cannot be used.
(3) [Frame Rate]
Enter the maximum frame rate of image to be
uploaded. This setting can only be made when
[JPEG] is selected for [Video Format].
(4) [Pre-event Buffer (number of frames)] / [Pre-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
buffered before the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264(1)] selection in [Video
Format].
(5) [Post-event Buffer (number of frames)] / [Post-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
buffered after the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264(1)] selection in [Video
Format].
Note
The server or network load may increase and the frame rate may
drop, depending on the settings. If this occurs, try the following
measures. Also check the settings including the network to the
server.
Reduce the image file size:
Set a lower value under [Video Quality] for [JPEG]/
[H.264(1)] (p. 59).
Set a lower value for [Video Size: Upload / Memory card] for
[JPEG] (p. 59).
Set a lower value for [Video Size] for [H.264(1)] (p. 60).
Set a lower value under [Target Bit Rate (kbps)] for
[H.264(1)] (p. 60).
[Upload]
Setting HTTP/FTP Upload and E-mail Notification
The following can be set here.
General Upload
Set the upload operation to be performed and the
image buffer.
•HTTP Upload
Set HTTP connection uploads.
•FTP Upload
Set FTP connection uploads.
E-mail Notification
Set event information and image e-mail
notifications.
Important
If the upload function is used, either the [Event] menu must
be set (p. 69) or the [Event] tab in the Intelligent Function
Setting Tool (p. 118) must be set.
If you are using both e-mail notification by text and image
and image upload by HTTP/FTP, set [Video Size: Upload /
Memory card] (p. 59) to a small size.
HTTP upload does not support SSL/TLS.
If the camera is set to perform upload or e-mail notification
continuously, not all images or e-mails may be sent
depending on the video size and the network condition to the
server. In this case, an event log message is displayed
(p. 86).
If the destination for HTTP/FTP upload or e-mail notification is
set for a Windows operating system, IPsec communication
cannot be applied.
When an H.264 video is uploaded, the following restrictions
apply to [H.264(1)] of [Video].
- Only [Use bit rate control] can be selected for [Bit Rate
Control].
- Only [3072] or less can be selected for [Target Bit Rate
(kbps)].
- Only one of [0.5], [1], and [1.5] can be selected for [I
Frame Interval (sec)].
The maximum image buffer size capacity is approx. 5 MB.
If a large video size is set, the Frame Rate, Pre-event Buffer
and Post-event Buffer may not be achieved as specified.
If buffering cannot be achieved as specified, a message is
written to the event log (p. 86).
Before using a large video size, confirm that no messages
appear in the event log.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H630VE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H630VE in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info