683289
59
Zoom out
Zoom in
Previous page
1/193
Next page
59
4
Setting Page
All Videos
[Video Size Set]
Select the set of video sizes used by the camera. All
options in the [Video] menu and the size set that can be
selected in [Video Size] are determined by the set
selected here.
JPEG
(1) [Video Quality]
Select a desired video quality from 1 to 5 (5 levels) for
videos transmitted at each video size in JPEG.
Greater values have higher quality.
(2) [Video Quality: Digital PTZ]
Select a desired video quality from 1 to 5 (5 levels) for
Digital PTZ.
Greater values have higher quality.
(3) [Video Size: video Transmission]
Select the size of the transmitted video. The video
sizes that can be selected depend on the [Video Size
Set] setting.
The default video size is selected if the video size is
not specified in each type of viewer.
(4) [Maximum Frame Rate: Video Transmission]
Limit the maximum transmission frame rate per
second to reduce the viewer load. The maximum is 30
frames/sec. Enter a value of between 0.1 and 30.0.
(5) [Video Size: Upload / Memory card]
Select the size of video when using the upload
function (p. 64) or when recording to a memory card
(p. 82). The video sizes that can be selected depend
on the [Video Size Set] setting. Use [Event] > [Video
Record Action] (p. 69) to specify the destination of a
video recording (upload or memory card recording).
[Video] Setting Video Size, Quality and Frame Rate
The following can be set here.
All Videos
Specify the set of video sizes used by the camera.
JPEG
Set the video quality, size, maximum frame rate
and upload size in JPEG.
H.264
Set the bit rate, video size and capture frame rate
in H.264.
On-screen display
Set time, character string, etc. displayed over
images.
[Video Size Set] System Aspect ratio
[1920x1080/960x540/480x270] 1080p 16:9
[1280x720/640x360/320x180] 720p 16:9
[1280x960/640x480/320x240] 4:3 4:3
[Video Size Set] System Aspect ratio
[1280x720/640x360/320x180] 720p 16:9
[1280x960/640x480/320x240] 4:3 4:3
Important
Changing the [Video Size Set] setting will disconnect all
connections and then change all the video sizes.
Consequently, users connected to the camera must
reconnect.
If the [Video Size Set] selection is changed and you click
[Apply and Reboot], review the following settings and check
the operation.
- Privacy mask settings
- View restriction settings
- Preset settings
- Intelligent function settings
- Camera Angle Setting Tool
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H630VE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H630VE in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info