683288

Canon VB-H43 Manual

57
Zoom out
Zoom in
Previous page
1/193
Next page
[Camera] Setting Initial Camera Settings and External Device Name
57
Setting Page
4
When [Haze Compensation] is set to [Auto] and [Haze
Compensation Strength (Auto)] is set to [Strong],
contrast may be strong if the subject is not obscured
by haze. If this happens, set [Haze Compensation
Strength (Auto)] to [Mild].
(6) [Pan/Tilt Speed Control]
Select [Control at set speed] or [Control by zoom
position] for the pan/tilt control mode. If [Control by
zoom position] is selected, the pan/tilt speed will be
slower in the telephoto zoom range, and faster in
wide-angle zoom range.
Note
• [Pan/Tilt Speed Control] can also be set using [Pan/Tilt] in the
Control for Admin panel of the Admin Viewer (p. 150).
• If [Control by zoom position] is selected, [Control for Admin] >
[Pan/Tilt] will also be fixed at [Control speed by zoom position].
Day/Night (when Auto is set)
(1) [Switching Brightness]
Set the brightness at which Day Mode and Night
Mode will be switched when [Auto] is selected in
[Day/Night]. Select [Darker], [Slightly Darker],
[Standard], [Slightly Brighter] or [Brighter]. Select
[Darker] if you want to capture video in color as much
as possible.
Select [Brighter] to reduce noise. Note that this mode
switches to black & white sooner.
(2) [Response (sec.)]
Set the time in seconds needed for judgment on
switching between Day Mode and Night Mode when
[Auto] is selected in [Day/Night]. Select [60], [30],
[20], [10] or [5].
The mode will switch between Day Mode and Night
Mode if brightness remains above or below the level
set in (1) for the number of seconds specified.
Select [30] or [60] if brightness changes frequently,
such as when a light source passes in front of the
camera. Select [5] or [10] if change in brightness is
minimal.
Installation Conditions
(1) [Dome]
Select whether or not a dome is used. To use the
camera with a dome housing unit, select [Use].
(2) [LED Setting]
Select [Turn Off] or [Turn On] for the LED operation
status on the camera. Set to [Turn Off] if you do not
want to turn on the LED.
Set to [Turn Off] if an optional indoor dome housing for
the camera is used, if reflected LED light enters the
capture area or otherwise interferes with image
capture, or if you do not want to show that the camera
is operating.
(3) [Image Flip]
Select [Disable] or [Enable] for the orientation of the
camera video.
Note
• For the focus ranges when the dome is set to
[Use], see the note on p. 56.
• The LED will light for several
seconds when booting even if the [LED Setting] is set to [Turn
Off].
Camera Position Control
(1) [Restricted to Presets]
Set the camera control preset to [No Restriction] or
[Preset Only]. The administrator can limit camera
control by non-administrators to preset angles by
selecting [Preset Only].
(2) [Camera Position without Control]
Select either [Do not return to Home Position] or
[Return to Home Position] as the action when no
control privileges are requested by users and the
home position has already been set.
When [Return to Home Position] is selected and no
users have control privileges, the camera moves
automatically to the home position. This function
requires the home position of the camera be set in
advance. Set the home position using Preset Setting
Tool (p. 104).
Important
• [AGC Limit] is disabled when [Exposure] is set to [Manual] or
[Auto (Flickerless)] in the Admin Viewer.
• Minimum subject illumination may change when [AGC Limit]
is set.
• If [On2] is selected for [Image Stabilizer], it is best to select a
video size smaller than “960 x 540”.
• The image stabilizer is not effective when the subject is shaking.
• The image stabilizer is not effective beyond a certain level of
vibration or against momentary vibration.
• See “Important” on p. 95, p. 102, p. 108 for precautionary
notes regarding Admin Tools configuration when image
stabilizer is set.
• See “Important” on p. 148 for precautionary notes regarding
the Viewer when image stabilizer is set.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon VB-H43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon VB-H43 in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon VB-H43

Canon VB-H43 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info