596283
13
Zoom out
Zoom in
Previous page
1/19
Next page
Wireless Multi
-
Flash
E-'lTL
Autoflash Operation
(1)
Setting the Slave
ID
With the wireless control of multi
-
ple slaves, you can set the flash
ratio and specify the main flash
and fill flash by assigning a slave
ID. There are three
IDS:
A,
B,
and
C.
The
ST-E2
can control slaves
A
and
B.
When the flash ratio con
-
trol lamp is lit, the
C
slave does
not fire.
Set the slave
ID
to A for the slave on
the left of the camera. and to
B
for
the slave on
the right of the camera.
Press the slave's
<
SEL/SET
>
button to select
<
>
.
2
Press the
<
+
>
or
<
-
>
but
-
ton to set the slave ID to
<A>.
3
Press the
<
SELISET
>
button
to register the slave ID. (The
slave
ID
stops blinking and
stays on.)
4
Follow the same procedure for
the other slave to set the slave
ID to
<B>.
0
If
the slave's
ID
is set to
C,
it
cannot he controlled
by
thc
ST-
E2.
Be sure to set the slave
ID
7rn5s
to
A
or
B.
There is no limit as to the
number of slaves that can be
used. Set the slave
ID
for all
the slaves to either
A
or
B.
About Slave Group
Control
All slaves set to the same ID are
controlled as one group.
Shown below
is
a group of three
slaves whose
ID
is A. They will be
controlled as
a
single slave group A.
COPY
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Speedlite Transmiter ST-E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Speedlite Transmiter ST-E2 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info