670718
77
Zoom out
Zoom in
Previous page
1/82
Next page
77
Handling Precautions
Do not apply excessive force to the printer. Force or impact on the printer may result in paper jams
or equipment damage.
Be careful not to spray the equipment with insecticides or volatile substances. In addition, do not
store the equipment in contact with rubber or vinyl products for long periods of time. This may cause
alteration of the casing.
Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This
is not a malfunction. SELPHY will resume normal printing as soon as it cools down. Temporary
stoppages increase printing time and are most likely to occur when printing continuously, if a room
is unusually warm, or if the air vents on the back of SELPHY are blocked and internal temperature
is high.
Avoid condensation on SELPHY when moving it from a cold to a hot place by putting it in an airtight,
sealable plastic bag and allow for adjustment to temperature changes gradually before removing
from the bag. In the event that condensation does form within SELPHY, keep it at room temperature
until the water droplets evaporate naturally before use.
When SELPHY gets dirty, wipe the casing with a soft dry cloth.
If the air vents (p. 8) have become dusty, wipe the dust away. If dust gets in through the vents, the
printer may not print clearly.
Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They
may cause deformation or peeling of the casing.
Using the Cleaner Unit to Care for SELPHY
If you cannot make clean prints, remove dust on the printer head with the supplied cleaner unit.
1
Remove the cartridge (p.13).
Insert the cleaner unit in the cartridge
compartment and push it in completely
and slide it in and out 2 or 3 times.
Do not touch white parts of the cleaner as its performance may be affected.
Only the cleaner supplied with this printer can be used.
Arrow side
facing up
2
COPY
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon SELPHY ES40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon SELPHY ES40 in the language / languages: English as an attachment in your email.

The manual is 9,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info