615714
58
Zoom out
Zoom in
Previous page
1/67
Next page
58
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB
Cable
Appendix
Printing via Wi-Fi
Troubleshooting
Wi-Fi
Do not use the printer near sources of Wi-Fi signal interference, such as
microwave ovens, Bluetooth devices, or other equipment operating on the
2.4 GHz band.
Device SSID (network name) not displayed when connecting to a
camera or smartphone
As the connection method, choose [Direct Connection] (=
35, 38).
Keep the printer near the camera or smartphone, without objects between them.
Access point not displayed on the printer
Cannot connect the printer to the access point
As the connection method, choose [Via Wi-Fi Network] (=
40).
Conrm that the access point is on and ready for communication. For instructions on
how to check, refer to the access point user manual.
If there are many access points but the required one is not listed, connect using WPS
(=
40) or manually (=
44).
Keep the printer near the access point, without objects between them.
Conrm that the password is correct, and try connecting again.
Conrm that the access point channel is between 1 – 11. Instead of auto channel
assignment, it is advisable to specify a channel in this range manually. For
instructions on checking or adjusting the settings, refer to the access point user
manual.
If the access point lters communication by MAC or IP addresses, on the access
point, register the printer information shown when you check the settings (=
48).
Also try disabling any access point isolation or privacy separation functions.
For instructions on checking or adjusting the settings, refer to the access point user
manual.
In WEP networks without DHCP, set the IP address manually (=
48).
Cannot connect via Wi-Fi
Try restarting SELPHY. If a connection still cannot be established, check the settings
of the access point or other device for the Wi-Fi connection.
If connection via [WPS Connection] is not possible, try connecting by using [Search
for an access point] (=
42) or [Manual Settings] (=
44).
Can connect to access point, but cannot print
Remove any inserted memory cards or USB ash drives.
Printing is not possible when the printer is already printing a job from another device,
or when the printer is connected to a camera.
When printing from a smartphone, install Canon PRINT Inkjet/SELPHY (=
34).
Conrm that the camera, smartphone, or computer you are printing from is connected
to the same access point as SELPHY.
Check the access point password and try to connect again (=
45).
If a message is displayed after you enter the correct password and press the <o>
button (=
44), conrm that DHCP server functionality is enabled on the access
point, and make sure connection settings on SELPHY such as the IP address are
correct (=
48).
Printing takes too long, or the Wi-Fi connection is lost
Do not use the printer near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
Note that even when [
] is displayed, image transmission may take some time.
In direct connections (=
34, 37), keep the printer near the camera or
smartphone, without objects in between.
In connections via an access point (=
40), keep the printer near the access point,
without objects in between.
Cannot connect via Wi-Fi from the computer
Conrm that the printer driver is installed correctly in Windows.
In Windows, enable [Network Discovery].
In Mac OS, register SELPHY on the computer (=
46).
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Selphy CP1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Selphy CP1200 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Selphy CP1200

Canon Selphy CP1200 User Manual - German - 67 pages

Canon Selphy CP1200 User Manual - Dutch - 67 pages

Canon Selphy CP1200 User Manual - French - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info