584709
50
Zoom out
Zoom in
Previous page
1/61
Next page
49
Connecting the Printer to Your Computer
Notes about connection
In using the USB cable, be sure to connect the printer directly to your
computer.
If you connect the USB cable via a USB hub, the printer may not function properly.
Do not use other USB devices (with the exception of a USB mouse or
keyboard) with the printer. The printer may not function properly.
Disconnect the other USB devices from your computer and then reconnect the
printer.
Do not connect two or more direct print compatible printers (all CP series
printers) to the same computer.
The printers may not function properly.
When connecting the printer to your computer, we recommend that you
connect it to the same USB port you used to install the printer driver.
If you connect the printer to a different USB port, Windows may create a copy of
the printer driver. This depends on your Windows version and the printer driver,
and does not affect the operation of the printer.
To delete a copy of the printer driver, proceed as follows:
1. Disconnect the USB cable from your computer.
2. Delete the copy of the printer driver as follows (do not use the uninstaller.)
(1)For Windows 98/Me/2000, click the [Start] button and select [Settings], and
[Printers].
For Windows XP, click the [Start] button and select [Control Panel], [Printers
and Other Hardware], and [Printers and Faxes].
(2)Right-click the copy of the printer driver and then select [Delete] on the short-
cut menu.
3. Restart your computer. Connect the printer to the USB port you used to install
the printer driver.
Do not put your computer into the standby mode (or sleep mode) while the printer
is connected to a USB port.
If you accidentally do so, do not disconnect the USB cable from your computer
while it is in the standby mode; instead, leaving the USB cable connected, first
return your computer to its normal mode. If you remove the USB cable while your
computer is in the standby mode, your computer may not be able to return to its
normal mode. For details on your computer’s standby mode, refer to the
documentation provided with your computer.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon SELPHY CP 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon SELPHY CP 400 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info