19958
46
Zoom out
Zoom in
Previous page
1/56
Next page
42
Appendix
Safety Information
Warnings and Cautions
This guide uses the following icons to indicate situations that could cause damage or injury:
Always follow the instructions provided in Warnings to prevent potential or serious
personal injury or death as a result of careless operation of the equipment.
Always follow the instructions provided in Cautions to prevent minor injuries to yourself
or damage to the equipment as a result of careless operation of the equipment.
Read and follow all of these cautions and warnings to ensure the safe use of the printer. To avoid the hazards of
fire, personal injury, or damage to the printer, never attempt to use the printer in any way other than the
methods described in this guide.
Choosing a Location
Never place the printer near flammable solvents such as alcohol, thinner, etc. To avoid
the hazards of fire or electric shock, keep all flammable liquids away from the printer.
Never set the printer on a surface that is unstable or subject to excessive vibration. The printer could tip or fall
and cause injury.
Never use the printer in a location that is subject to high humidity, dust, high temperatures, or direct
sunlight.
Set up and use the printer in a location where ambient temperature is within 41°F–95°F (5°C–35°C) and
10%–90% humidity with no condensation.
Never place the printer on a thick carpet or rug. Fibers or dust entering the printer could
cause a fire.
Keep the power outlet for the printer free of all obstacles so you can unplug the power
cord at any time. Such obstacles could prevent you from unplugging the printer when a
printer fault occurs and cause a fire or electric shock. The socket-outlet shall be installed
near the equipment and shall be easily accessible.
Always carry the printer with both hands holding both ends of the printer. To avoid dropping the printer and
causing injury, always carry it carefully when moving it to another location.
Power Supply
Never attempt to plug the power cord into a power outlet when your hands are wet. To
avoid electric shock, make sure that your hands are dry.
Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a fire or
electric shock.
Never cut, modify, stretch, bend, or twist the power cord, and never place heavy objects
on the power cord. A power leak from a damaged power cord could cause a fire or electric
shock.
Never plug the printer power cord into a power outlet (power board, double adapter, etc.)
that is shared by other devices or office equipment. To prevent the hazards of fire or
electric shock, avoid overloading power points.
Never use the printer if the power cord is bundled or knotted. To prevent the hazards of fire or electric shock,
make sure the power cord is straight.
S200 QS.book Page 42 Tuesday, September 18, 2001 9:02 AM
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon S200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon S200 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info