19958
10
Zoom out
Zoom in
Previous page
1/56
Next page
6
Basic Printing
To load envelopes:
1.
Open the front cover and set the paper thickness lever to the envelope mark.
Close the cover.
2.
Slide the paper feed guide to the left.
3.
Press down on the corners
and sides of the envelopes to
make them as flat as possible
by expelling all of the air.
To avoid paper jams, make
sure envelopes are flat before
you load them into the
paper tray.
4.
With the address side facing down and pointed in
the direction shown in the illustration, align the
stack with the right side of the paper rest, then
insert the stack into the printer.
5.
Slide the paper guide to the edge of the
envelopes until it is firmly in place.
Make sure that none of the flaps overlap. If the envelope edges
are not flat, crease them with the side of a pen.
Do not allow more than 5 envelopes to stack on the paper output tray.
When printing envelopes, be sure to
select Envelope as the Media Type
on the Main tab of the Properties
window. For more information, see
page 9 (Windows) or page 11
(Mac OS) of this guide, or refer to the
S200 User’s Guide
on the Setup
Software & User’s Guide CD-ROM.
Flap side of envelope faces up
S200 QS.book Page 6 Tuesday, September 18, 2001 9:02 AM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon S200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon S200 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info