683253

Canon RC-V100 Manual

19
Zoom out
Zoom in
Previous page
1/26
Next page
19
En
Customization
You can personalize various aspects of the remote controller’s operation, including the
brightness of buttons and indicators and the dials’ direction, to your preference.
* PAINT-group dials: KNEE POINT dial, KNEE SLOPE dial, BLACK GAMMA LEVEL dial, SHARPNESS
LEVEL dial.
** WB/MB group dials: WHITE BALANCE R dial, WHITE BALANCE B dial, MASTER BLACK R dial, MASTER
BLACK B dial.
Micro
switch
Category Content
Micro Switch Position
ON OFF
A-1 Dials’ Direction PAINT-group* dials’ direction Reverse Normal
A-2 WB/MB-group** dials’ direction Reverse Normal
A-3 ZOOM dial direction Reverse Normal
A-4 FOCUS dial direction Reverse Normal
A-5 MASTER PEDESTAL dial direction Reverse Normal
A-6 IRIS dial direction Reverse Normal
A-7 Dials’ Sensitivity IRIS dial sensitivity Low High
A-8 FOCUS dial sensitivity Low High
B-1 All other dials’ sensitivity Low High
B-2 Dials’ Mode PAINT-group* dials’ mode Absolute Relative
B-3 WB/MB-group** dials’ mode Absolute Relative
B-4 MASTER PEDESTAL dial mode Absolute Relative
B-5 Buttons/Indicators Lamps active Off On
B-6 Brightness Dim Bright
B-7 Sound Operating sounds Off On
B-8 Reserved for service/maintenance — —
About the dial modes
You can set the various dials’ mode to absolute or relative.
In relative mode, the value is adjusted according to the difference between the dial’s
position before the change and its position after the change. In relative mode, the
position of the dial does not reflect the current value of the setting being adjusted.
In absolute mode, the position of the dial always corresponds to the current value of
the setting being adjusted. The dial’s center position (where it clicks) represents the
setting’s standard value and the dial’s end positions correspond to the setting’s
maximum and minimum values.
NOTES
• When a dial is set to relative mode, the adjustment range may be narrowed
depending on the initial position of the dial when it was activated.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon RC-V100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon RC-V100 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info