580360
154
Zoom out
Zoom in
Previous page
1/177
Next page
154
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Subjects look too bright, highlights are washed-out.
Lower the ash and set the ash mode to [ ] (
=
31).
Adjust brightness by using exposure compensation (
=
68).
Use AE lock or spot metering (
=
68,
=
68).
Reduce the lighting on subjects.
Shots look too dark despite the ash ring (
=
34).
Shoot within ash range (
=
171).
Adjust brightness by using ash exposure compensation or changing the ash
output level (
=
78,
=
82).
Increase the ISO speed (
=
69).
Subjects in ash shots look too bright, highlights are washed-out.
Shoot within ash range (
=
171).
Lower the ash and set the ash mode to [
] (
=
31).
Adjust brightness by using ash exposure compensation or changing the ash
output level (
=
78,
=
82).
White spots appear in ash shots.
This is caused by light from the ash reecting off dust or airborne particles.
Shots look grainy.
Lower the ISO speed (
=
69).
High ISO speeds in some shooting modes may cause grainy images (
=
57).
Subjects are affected by red-eye.
Set [Red-Eye Lamp] to [On] (
=
53). The red-eye reduction lamp (
=
4)
will light up for ash shots. For best results, have subjects look at the red-eye
reduction lamp. Also try increasing the lighting in indoor scenes and shooting at
closer range.
Edit images using red-eye correction (
=
100).
Recording to the memory card takes too long, or continuous shooting is
slower.
Use the camera to perform low-level formatting of the memory card (
=
137).
Shooting settings or FUNC. menu settings are not available.
Available setting items vary by shooting mode. Refer to “Functions Available in
Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” (
=
161 –
=
167).
The Babies or Children icon does not display.
The Babies and Children icons will not display if the birthday is not set in face
information (
=
43). If the icons still do not display even when you set the
birthday, re-register face information (
=
44), or make sure that the date/time
are set correctly (
=
134).
Shooting
Cannot shoot.
In Playback mode (
=
83), press the shutter button halfway (
=
25).
Strange display on the screen under low light (
=
26).
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
- The screen may icker and horizontal banding may appear under uorescent
or LED lighting.
Full-screen display is not available while shooting (
=
48).
[
] ashes on the screen when the shutter button is pressed, and shooting
is not possible (
=
34).
[
] is displayed when the shutter button is pressed halfway (
=
34).
Set [IS Mode] to [Continuous] (
=
79).
Raise the ash and set the ash mode to [
] (
=
77).
Increase the ISO speed (
=
69).
Mount the camera on a tripod or take other measures to keep it still. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (
=
79).
Shots are out of focus.
Press the shutter button halfway to focus on subjects before pressing it all the
way down to shoot (
=
25).
Make sure subjects are within focusing range (
=
172).
Set [AF-assist Beam] to [On] (
=
52).
Conrm that unneeded functions such as macro are deactivated.
Try shooting with focus lock or AF lock (
=
74,
=
76).
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter
button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
Raise the ash and set the ash mode to [ ] (
=
77).
Adjust brightness by using exposure compensation (
=
68).
Adjust contrast by using i-Contrast (
=
69,
=
99).
Use AE lock or spot metering (
=
68,
=
68).
154


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Powershot SX710HS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Powershot SX710HS in the language / languages: English as an attachment in your email.

The manual is 10,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Powershot SX710HS

Canon Powershot SX710HS Quick start guide - English - 9 pages

Canon Powershot SX710HS Quick start guide - German - 9 pages

Canon Powershot SX710HS User Manual - German - 177 pages

Canon Powershot SX710HS Quick start guide - Dutch - 9 pages

Canon Powershot SX710HS User Manual - Dutch - 178 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info