458172
155
Zoom out
Zoom in
Previous page
1/175
Next page
Troubleshooting
155
Image is blurred.
Press the shutter button halfway to focus on the subject, then press fully to shoot (p. 22).
Shoot the subject within the focusing distance (p. 168).
Set the [AF-assist Beam] to [On] (p. 146).
Confirm that functions which you do not intend to use (macro, etc.) are not set.
Shoot using the focus lock or AF lock (pp. 78, 81).
Even when you press the shutter button halfway, the AF frame does
not appear, and the camera does not focus.
If you center on the light and dark contrasting area of the subject and push the shutter
button halfway, or repeatedly push the shutter button halfway, the AF frame will appear
and the camera will focus.
Subject is too dark.
Raise the flash and set it to h (p. 69).
Correct the brightness with exposure compensation (p. 68).
Adjust the image with i-Contrast (pp. 92, 131).
Use AE Lock, or spot metering to shoot (pp. 85, 87).
Subject is too bright (overexposed).
Lower the flash and set it to !.
Correct the brightness with exposure compensation (p. 68).
Use AE Lock, or spot metering to shoot (pp. 85, 87).
Reduce the light illuminating the subject.
Image is dark even though the flash fired (p. 25).
Shoot within an appropriate distance for flash photography (p. 69).
Correct the flash exposure compensation amount or flash output (pp. 94, 95).
Increase the ISO speed (p. 72).
Image taken using the flash is too bright (overexposed).
Shoot within an appropriate distance for flash photography (p. 69).
Lower the flash and set it to !.
Correct the flash exposure compensation amount or flash output (pp. 94, 95).
White dots appear on the image when shooting with the flash.
Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
Shoot with the ISO speed on a lower setting (p. 72).
Depending on the Shooting mode, when shooting in a high ISO speed the image may
appear rough or grainy (pp. 58, 59).
Eyes appear red (p. 93).
Set the [Red-Eye Lamp] to [On] (p. 147). When shooting with the flash, the lamp (on
the front of the camera) lights (p. 40), and for approximately 1 second while the camera
is reducing red-eye, it is not possible to shoot. It is more effective if the subject is
looking directly at the lamp. Even better results can be obtained by increasing the
lighting in indoor settings or approaching closer to the subject.
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Powershot SX 130IS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Powershot SX 130IS in the language / languages: English as an attachment in your email.

The manual is 14,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Powershot SX 130IS

Canon Powershot SX 130IS User Manual - German - 175 pages

Canon Powershot SX 130IS User Manual - Dutch - 175 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info