100362
82
Zoom out
Zoom in
Previous page
1/179
Next page
80
The recording time may not display properly during shooting or filming
may stop unexpectedly with the following types of SD cards.
- Slow recording cards
- Cards formatted on a different camera or a computer
- Cards which have had images recorded and erased repeatedly
Although the recording time may not display properly during shooting,
the movie will be recorded correctly on the SD card. Recording time
will display properly if you format the SD card in this camera
(excluding slow recording SD cards).
You are recommended to use an SD card that has been formatted in
your camera to shoot movies (p. 28). The card supplied with the camera
may be used without further formatting.
Be careful not to touch the microphone while recording.
Do not press buttons other than the shutter button while filming to avoid
inadvertent recording of the operation sounds.
The AF and zoom settings remain fixed for subsequent frames at the
values selected for the first frame.
During filming, the camera will automatically correct the exposure and
white balance settings to suit the shooting conditions. Please note,
however, that the sounds made by the automatic settings adjustment
may also be recorded.
After a clip is shot, the indicator will blink green while the clip is being
written to the SD card. You cannot shoot again until the blinking stops.
See Functions Available in Each Shooting Mode
(p. 176).
Sound is recorded monaurally.
There is no shutter sound in movie mode.
You can adjust the exposure compensation setting before shooting.
Press the button to lock the exposure setting (AE lock) and display
the exposure compensation bar in the LCD monitor. Use the or
button to adjust the setting. The exposure compensation setting will
cancel if you press the
MENU
button or change the white balance,
photo effect or shooting mode.
The recording time and capacity may vary according to camera usage
and SD card performance. If free space in the camera's internal
memory becomes too scarce, even if there is surplus recording time or
capacity available, the "!" symbol will display at the bottom right of the
LCD monitor in red and the camera will automatically cease filming
shortly thereafter. If the "!" warning displays frequently, try the following
procedures.
- Reformat the SD card before filming (p. 28)
- Set the resolution to (320 x 240) or the frame rate to (15
frames/sec.)
- Use a high-speed SD card (SDC-512MSH, etc.)
QuickTime 3.0 or later is required to play back movie files (AVI/Motion
JPEG) on a computer. QuickTime (for Windows) is included on the
Canon Digital Camera Solution Disk. On the Macintosh platform, this
program is generally bundled with Mac OS 8.5 or later operating
systems.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Powershot SD200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Powershot SD200 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info