100548
163
Zoom out
Zoom in
Previous page
1/212
Next page
157
Connecting
Setting the Communication Mode
Sets the communication mode when downloading images with the camera
connected to the computer.
* With any other OS [PTP] cannot be used. Please select [Normal].
1
Check that the camera is not connected to the computer.
2
In the [ (Set Up)] menu, select [Communication].
See Selecting Menus and Settings (p. 42).
3
Select [Normal] or [PTP] using the B or A arrow on the omni
selector and press the
button.
Some problems may occur when downloading images to a computer in the PTP
mode with certain file types. For more details, please refer to the supplied Picture
Transfer Protocol (PTP) Mode leaflet.
It is recommended to power the camera with the Compact Power Adapter CA-
560 when connected to a computer (p. 21).
If you disconnect the USB cable while the camera is on, the camera will
automatically turn off.
If you leave the camera unused for approximately 5 minutes while it is connected
the computer, the computer screen displays a warning message. If you do not take
any action within the next minute, the camera turns off. You can turn the camera
back on by turning the mode lever toward
or . However, the power-saving
function is not active when the communication settings are set to [PTP].
All procedures performed with a connection to a USB 2.0 compliant board are not
guaranteed.
For information about what to do after making the connection, please
refer the Software Starter Guide.
(Picture Transfer Protocol)
Normal (Default) Usual setting. You must install the USB driver bundled on the Canon
Digital Camera Solution Disk before using this mode.
PTP The below functions are available even if the software and USB driver
bundled on the Canon Digital Camera Solution Disk have not been
installed.
• Viewing the camera’s images
• Downloading the camera’s images to a computer
• Deleting the camera’s images
These functions are available with Windows XP or Mac OS X (10.1)
or a later OS*.
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Powershot G 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Powershot G 3 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info