100478
47
Zoom out
Zoom in
Previous page
1/61
Next page
9392
Image too large :
You attempted to replay an image whose resolution exceeded 3200 x 2400 pixels or
whose file size was too large.
Incompatible JPEG format
: You attempted to replay an incompatible JPEG file.
Corrupted data
:
You attempted to replay an image with corrupted data.
RAW
:
You attempted to replay an image recorded in the RAW format.
Unidentified image
:
You attempted to replay an image file recorded in a unrecognized format (file recorded
by a different camera in a proprietary format, etc.).
Cannot magnify!
:
The image you attempted to magnify was recorded by another camera, or recorded in a
format that cannot be magnified, or edited on a computer.
Cannot rotate!
:
The image you attempted to rotate was recorded by another camera, or recorded in a
format that cannot be rotated, or edited on a computer.
Protected!
:
You attempted to erase a protected image.
Too many marks!
:
Too many images have been marked for printing. No more images can be marked.
Unselectable image
:
You attempted to set the print settings for a non-JPEG file.
Exx
:
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or replay. If
the same message recurs frequently, the camera may be damaged. Note down the error
number [xx] and take the camera to a Customer Support Help Desk. If this message
appears immediately after you have taken a shot, the camera may not have shot the
image. Switch to the Replay mode and check whether the image was actually recorded.
List of Menu Options and Messages
List of Messages
The following table explains each of the messages that may appear on the LCD monitor.
Busy... : The camera is recording image data to the CF card. The Replay mode is running.
No CF card : You attempted to shoot or replay with no CF card installed.
Cannot record! : You attempted to shoot with no CF card installed.
CF card error! : There is something wrong with the CF card.
CF card full :
The CF card is too full to store images or accept new print settings.
Naming error!
: The camera cannot generate a file name for the image you have shot because the card
already contains a folder having the same name as the file to be created, or the file
number has already reached the maximum possible value. Display the Rec. menu and
set [File Number Reset] to [On]. Save all images you wish to keep into your computer,
and reformat the CF card. Please note that formatting will erase all data in the card.
Change the batteries
: The batteries are dead, and the camera can no longer function. Replace both batteries
at the same time with new AA-size alkaline batteries (p. 19) or fully recharged batteries.
No image : No images recorded on CF card.
List of Menu Options and Messages
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Powershot A 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Powershot A 200 in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info