650576
120
Zoom out
Zoom in
Previous page
1/510
Next page
TS9000 series
Online Manual
Overview
Printing
Copying
Scanning
Frequently Asked Questions
English
Contents
Using This Online Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Printing Photos from a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Copying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Printing Photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Printing a Disc Label from a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Copying a Disc Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Handling Paper, Originals, Ink Tanks, Printable Disc, Memory Card, etc.. . . . . . 42
Loading Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Paper Sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Loading Paper in the Rear Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Loading Paper in the Cassette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Loading Envelopes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Placing a Printable Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Cautions When Printing on a Printable Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Before Placing a Printable Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Placing a Printable Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Removing a Printable Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Loading Originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Loading Originals on the Platen Glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Loading Based on Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Supported Originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
How to Detach / Attach the Document Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Inserting the Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Before Inserting the Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Inserting the Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Removing the Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Replacing Ink Tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Replacing Ink Tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Checking Ink Status on the Touch Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Checking the Ink Status with the Ink Lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
If Printing Is Faint or Uneven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Maintenance Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Printing the Nozzle Check Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Examining the Nozzle Check Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Cleaning the Print Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Deep Print Head Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Aligning the Print Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Cleaning Paper Feed Rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Cleaning Inside the Printer (Bottom Plate Cleaning). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
WEEE (EU&EEA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Main Components and Their Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Main Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Inside View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Confirming that the Power Is On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Turning the Printer On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Checking the Power Plug/Power Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Unplugging the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Using the Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Changing Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Changing Printer Settings from Your Computer (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Changing the Print Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Registering a Frequently Used Printing Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Managing the Printer Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Changing the Printer Operation Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Changing Settings from Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Changing Settings from Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Setting Items on Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Print settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
LAN settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Device user settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Language selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Firmware update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Feed settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Reset setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
System information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
ECO settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Network Connection Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Default Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Another Printer Found with Same Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Connecting to Another Computer via LAN/Changing from USB to LAN Connection. . . . . . . . . . 180
Printing Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Changing LAN Connection Method/Changing Wireless LAN Connection Method. . . . . . . . . . . . 186
Ensuring Optimal Printing Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Transporting Your Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Legal Restrictions on Scanning/Copying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Information about Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Supported Media Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Paper Load Limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Unsupported Media Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Handling Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Printing from Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Printing from Application Software (Windows Printer Driver). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Basic Printing Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Paper Settings on the Printer Driver and the Printer (Media Type). . . . . . . . . . . . . . . . . . . . 209
Paper Settings on the Printer Driver and the Printer (Paper Size). . . . . . . . . . . . . . . . . . . . 210
Various Printing Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Setting a Page Size and Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Setting the Number of Copies and Printing Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Execute Borderless Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Scaled Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Page Layout Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Tiling/Poster Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Duplex Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Setting Up Envelope Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Printing on Postcards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Setting the Print Quality Level (Custom). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Overview of the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Canon IJ Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Instructions for Use (Printer Driver). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Printer Driver Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Quick Setup tab Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
Main tab Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Page Setup tab Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Maintenance tab Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Canon IJ Status Monitor Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Installing the MP Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Printing Directly from Smartphone/Tablet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Using Printer with Wireless Direct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Printing Photo Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Printing Photographs Saved on Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Setting Items for Photo Printing Using Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Disc Label Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Copying Label Side of Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Printing Photo from Memory Card onto Disc Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Paper Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Making Copies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Setting Items for Copying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Scanning from Computer (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
Using IJ Scan Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
What Is IJ Scan Utility (Scanner Software)?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
Starting IJ Scan Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Using Auto Scan Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
IJ Scan Utility Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
IJ Scan Utility Main Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
Settings Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Scanning Using Application Software (ScanGear). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
What Is ScanGear (Scanner Driver)?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
Starting ScanGear (Scanner Driver). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
Scanning in Basic Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
ScanGear (Scanner Driver) Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
Basic Mode Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Advanced Mode Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
General Notes (Scanner Driver). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
Positioning Originals (Scanning from Computer). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Network Scan Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368
Scanning from Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
Forwarding Scanned Data to Computer Using Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
Setting Items for Scanning Using Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
Network Settings and Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Connecting the Printer to a Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385
Restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
Network Communication Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
Cannot Find Printer on Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
Cannot Find Printer on Check Printer Settings Screen During Setup (Windows). . . . . . . . . . . . . 391
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Power Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking PC Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Printer's Wireless LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless LAN Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Printer's IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Security Software Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless Router Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking LAN Cable and Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking PC Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Printer's Wired LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Printer's IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Security Software Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Router Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen. . . . . . . . . . . . . . . . 407
Cannot Find Printer while Using Wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409
Network Connection Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411
Printer Suddenly Cannot Be Used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
Network Key Unknown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings. . . . . . . . . . . 419
Other Network Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
Checking Network Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422
Restoring to Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
Printing Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
Printing Does Not Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427
No Ink Comes Out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
Paper Does Not Feed Properly/"No Paper" Error. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
Cannot Print on the Disc Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434
Print Results Are Unsatisfactory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear. . . . . . . . . . . . . . . . . 438
Lines Are Misaligned. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441
Paper Is Smudged / Printed Surface Is Scratched. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
Vertical Line Next to Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446
Scanning Problems (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447
Scanning Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448
Scanner Does Not Work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449
ScanGear (Scanner Driver) Does Not Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
Mechanical Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451
Power Does Not Come On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
Power Shuts Off By Itself. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
USB Connection Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
Cannot Communicate with Printer via USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
Installation and Download Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
Cannot Install MP Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
Updating MP Drivers in Network Environment (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
Errors and Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460
An Error Occurs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461
Message Appears. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
List of Support Code for Error. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470
List of Support Code for Error (Paper Jams). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472
1300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
1303. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
1304. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479
1313. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482
Paper Is Jammed inside Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
1000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488
1003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
1200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490
1401. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491
1600. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
1660. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
1688. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494
1689. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
1700. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
1890. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
2110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
2900. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
2901. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
4103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
5011. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504
5012. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
5100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
5200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
5B00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
6000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
C000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510
Using This Online Manual
Symbols Used in This Document
Touch-enabled Device Users (Windows)
Symbols Used in This Document
Warning
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Caution
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Important
Instructions including important information. To avoid damage and injury or improper use of the
product, be sure to read these indications.
Note
Instructions including notes for operation and additional explanations.
Basics
Instructions explaining basic operations of your product.
Note
Icons may vary depending on your product.
Touch-enabled Device Users (Windows)
For touch actions, you need to replace "right-click" in this document with the action set on the operating
system. For example, if the action is set to "press and hold" on your operating system, replace "right-click"
with "press and hold."
10
Trademarks and Licenses
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
Mac, Mac OS, AirPort, Safari, Bonjour, iPad, iPhone and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store, AirPrint and the AirPrint logo are trademarks of
Apple Inc.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under
license.
Google Cloud Print, Google Chrome, Chrome OS, Chromebook, Android, Google Play, Google Drive,
Google Apps and Google Analytics are either registered trademarks or trademarks of Google Inc.
Adobe, Flash, Photoshop, Photoshop Elements, Lightroom, Adobe RGB and Adobe RGB (1998) are
either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc.
Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its
subsidiaries and/or affiliates in the USA and/or other countries.
Note
The formal name of Windows Vista is Microsoft Windows Vista operating system.
Copyright (c) 2003-2004, Apple Computer, Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
11
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by
Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting
the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled
by, or are under common control with that entity. For the purposes of this definition, "control" means
(i) the power, direct or indirect, to cause the direction or management of such entity, whether by
contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii)
beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this
License.
"Source" form shall mean the preferred form for making modifications, including but not limited to
software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source
form, including but not limited to compiled object code, generated documentation, and conversions to
other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under
the License, as indicated by a copyright notice that is included in or attached to the work (an example
is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or
derived from) the Work and for which the editorial revisions, annotations, elaborations, or other
modifications represent, as a whole, an original work of authorship. For the purposes of this License,
Derivative Works shall not include works that remain separable from, or merely link (or bind by name)
to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any
modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to
Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity
authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent to the Licensor or its
representatives, including but not limited to communication on electronic mailing lists, source code
control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the
purpose of discussing and improving the Work, but excluding communication that is conspicuously
marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution
has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
12
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform,
sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby
grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as
stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise
transfer the Work, where such license applies only to those patent claims licensable by such
Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their
Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent
litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the
Work or a Contribution incorporated within the Work constitutes direct or contributory patent
infringement, then any patent licenses granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in
any medium, with or without modifications, and in Source or Object form, provided that You meet the
following conditions:
1. You must give any other recipients of the Work or Derivative Works a copy of this License; and
2. You must cause any modified files to carry prominent notices stating that You changed the files;
and
3. You must retain, in the Source form of any Derivative Works that You distribute, all copyright,
patent, trademark, and attribution notices from the Source form of the Work, excluding those
notices that do not pertain to any part of the Derivative Works; and
4. If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that
You distribute must include a readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at
least one of the following places: within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for informational purposes only and do not
modify the License. You may add Your own attribution notices within Derivative Works that You
distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such
additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or
different license terms and conditions for use, reproduction, or distribution of Your modifications,
or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of
the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally
submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions. Notwithstanding the above, nothing herein
shall supersede or modify the terms of any separate license agreement you may have executed with
Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service
marks, or product names of the Licensor, except as required for reasonable and customary use in
describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides
the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without
13
limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or
FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any risks associated with Your
exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence),
contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent
acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct,
indirect, special, incidental, or consequential damages of any character arising as a result of this
License or out of the use or inability to use the Work (including but not limited to damages for loss of
goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages
or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof,
You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other
liability obligations and/or rights consistent with this License. However, in accepting such obligations,
You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other
Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any
liability incurred by, or claims asserted against, such Contributor by reason of your accepting any
such warranty or additional liability.
END OF TERMS AND CONDITIONS
---- Part 1: CMU/UCD copyright notice: (BSD like) -----
Copyright 1989, 1991, 1992 by Carnegie Mellon University
Derivative Work - 1996, 1998-2000
Copyright 1996, 1998-2000 The Regents of the University of California
All Rights Reserved
Permission to use, copy, modify and distribute this software and its documentation for any purpose and
without fee is hereby granted, provided that the above copyright notice appears in all copies and that both
that copyright notice and this permission notice appear in supporting documentation, and that the name of
CMU and The Regents of the University of California not be used in advertising or publicity pertaining to
distribution of the software without specific written permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE
UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) -----
Copyright (c) 2001-2003, Networks Associates Technology, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
14
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----
Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----
Copyright c 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All
rights reserved.
Use is subject to license terms below.
15
This distribution may include materials developed by third parties.
Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 5: Sparta, Inc copyright notice (BSD) -----
Copyright (c) 2003-2009, Sparta, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
16
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) -----
Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and
Telecommunications.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of
their contributors may be used to endorse or promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 7: Fabasoft R&D Software GmbH & Co KG copyright notice (BSD) -----
Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com
Author: Bernhard Penz
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names
may not be used to endorse or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
17
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
LEADTOOLS
Copyright (C) 1991-2009 LEAD Technologies, Inc.
CMap Resources
-----------------------------------------------------------
Copyright 1990-2009 Adobe Systems Incorporated.
All rights reserved.
Copyright 1990-2010 Adobe Systems Incorporated.
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
Neither the name of Adobe Systems Incorporated nor the names
of its contributors may be used to endorse or promote
products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------
MIT License
18
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The following applies only to products supporting Wi-Fi.
(c) 2009-2013 by Jeff Mott. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions, and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the
following disclaimer in the documentation or other materials provided with the distribution.
* Neither the name CryptoJS nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS,"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
19
Basic Operation
Printing Photos from a Computer
Copying
Printing Photos
Printing a Disc Label from a Computer
Copying a Disc Label
20
Printing Photos from a Computer
This section describes how to print photos with My Image Garden.
1. Open the rear tray cover (A) and then pull up the paper support (B).
2.
Open the feed slot cover (C).
3. Load paper vertically WITH THE PRINT SIDE FACING UP.
4. Align the paper guides (D) with the paper width.
21
5.
Close the feed slot cover (E) gently.
After closing the feed slot cover, the paper information registration screen for the rear tray is displayed
on the touch screen.
6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and
then select Register.
22
7. Click the My Image Garden icon (F) in Quick Menu.
The Guide Menu screen is displayed.
Note
The number and types of icons displayed vary depending on your region, the registered printer/
scanner and the installed applications.
8.
Click the Photo Print icon (G).
9. Click the folder (H) with photos you want to print.
10. Click the photos (I) you want to print.
For Windows:
To select two or more photos at a time, click photos while pressing the Ctrl key.
For Mac OS:
To select two or more photos at a time, click photos while pressing the command key.
23
11. Click Print (J).
12.
Specify the number of copies, your machine name, media type, etc. (K).
13.
Click Print (L).
For Mac OS:
Click OK when the confirmation message appears, then click Print.
The operation panel is opened and the paper output tray is pulled out automatically, then printing will
start.
Note
My Image Garden lets you use images on your computer, such as photos taken with a digital camera, in
a number of ways.
For Windows:
My Image Garden Guide
For Mac OS:
24
My Image Garden Guide
25
Copying
This section describes how to load originals and copy them to plain paper loaded in the cassette.
1. Pull out the cassette (A) from the printer.
2.
Remove the cassette cover (B).
3.
Load the paper stack WITH THE PRINT SIDE FACING DOWN.
26
Note
To load A4 or Letter-sized paper in the cassette, extend the cassette.
4.
Align the paper guides (C) with the paper length and width.
5.
Mount the cassette cover, and then insert the cassette into the printer.
27
After inserting the cassette into the printer, the paper information registration screen for the cassette is
displayed on the touch screen.
6.
Select the size of the loaded paper in the cassette at Page size, and then select Register.
7.
Select Copy (D) on the HOME screen.
8. Select Standard copy.
28
9. Open the document cover (E).
10. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the
alignment mark (F).
11.
Close the document cover.
12.
Confirm the paper settings, then press the Black button or Color button (G).
The operation panel is opened and the paper output tray is pulled out automatically, then copying will
start.
Important
Do not open the document cover until copying is complete.
Note
Your printer is equipped with many other convenient copy features.
Copying
29
Printing Photos
This section describes how to print photos on a memory card.
1. Open the rear tray cover (A) and then pull up the paper support (B).
2.
Open the feed slot cover (C).
3. Load paper vertically WITH THE PRINT SIDE FACING UP.
4. Align the paper guides (D) with the paper width.
30
5.
Close the feed slot cover (E) gently.
After closing the feed slot cover, the paper information registration screen for the rear tray is displayed
on the LCD.
6.
Select the size and type of the loaded paper in the rear tray at Page size and Type, and
then select Register.
31
7. Insert the memory card.
* The figure below shows the SD/SDHC memory card as an example.
Note
For details on inserting memory cards other than SD/SDHC, see below.
Inserting the Memory Card
8.
Flick right and left through the photos (F) and select one.
9.
Confirm the paper settings, then touch the Color button (G).
The operation panel is opened and the paper output tray is pulled out automatically, then printing will
start.
Important
Do not remove the memory card during printing. Data on the memory card may be damaged.
Note
Your printer is equipped with many other convenient photo print features.
Printing Photo Data
32
Printing a Disc Label from a Computer
This section describes how to print photos on a printable disc with My Image Garden.
Important
Do not attach the disc tray until the message asking you to load the printable disc is displayed. Doing
so can damage the printer.
1. Click the My Image Garden icon (A) in Quick Menu.
The Guide Menu screen is displayed.
Note
The number and types of icons displayed vary depending on your region, the registered printer/
scanner and the installed applications.
2.
Click the Disc Label icon (B).
3. Specify the theme, Paper Size, etc. (C).
33
4. Click OK (D).
5.
When a dialog screen is displayed, click OK.
6.
Click Add Image (E), then select photos to print onto the disc label.
Note
The layout may not be as expected depending on the photo information or analysis results of the
selected images.
7.
Edit the disc label (F).
You can change the background or add texts.
For Windows:
My Image Garden Guide
For Mac OS:
My Image Garden Guide
8.
Click Print (G).
34
9.
Specify the number of copies, your machine name, etc. (H).
10.
Click the start button (I).
For Mac OS, click OK when the confirmation message appears, then click Print. When the confirmation
message appears again, click OK.
11. When the message asking you to load the printable disc is displayed, open the operation
panel (J), and then pick out the disc tray from the disc tray storage compartment (K).
35
12.
Place the printable disc with the printable surface facing up on the disc tray.
13.
Insert the disc tray into the disc tray guide.
Insert the disc tray straight until the white line on the disc tray guide is almost aligned with the arrow ( )
on the disc tray.
14. Start printing.
For Windows, click Start Printing on the dialog screen.
For Mac OS, tap OK on the touch screen.
The disc tray is drawn into the printer, then printing will start.
After printing is complete, pull the disc tray out from the printer.
Note
My Image Garden enables you to print photos onto the disc label with various layouts.
36
For Windows:
My Image Garden Guide
For Mac OS:
My Image Garden Guide
37
Copying a Disc Label
This section describes how to copy the label of an existing disc (BD/DVD/CD, etc.) and print it on a printable
disc.
1. Select Copy (A) on the HOME screen.
2.
Select Disc label (B).
3.
Specify the print area of the printable disc as necessary.
Tap Outer circle or Inner circle (C), specify the print area, then tap OK (D).
38
4. Specify the amount of ink (E).
If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink..
5.
Open the document cover (F).
6.
Load the copy source (BD/DVD/CD, etc.) WITH ITS LABEL SIDE DOWN on the platen
glass.
7. Close the document cover.
8. Select OK on the touch screen.
9. Confirm the print settings, then touch the Black button or Color button (G).
39
10.
When the message asking you to load the printable disc is displayed, open the operation
panel (H), and then pick out the disc tray from the disc tray storage compartment (I).
11.
Place the printable disc with the printable surface facing up on the disc tray.
12. Insert the disc tray into the disc tray guide.
Insert the disc tray straight until the white line on the disc tray guide is almost aligned with the arrow (
)
on the disc tray.
40
13.
Select OK on the touch screen.
The disc tray is drawn into the printer, then copying will start.
After copying is complete, pull the disc tray out from the printer.
Important
Do not open the document cover until copying is complete.
Note
Your printer is equipped with many other disc label print features.
Disc Label Printing
41
Handling Paper, Originals, Ink Tanks, Printable Disc, Memory Card,
etc.
Loading Paper
Placing a Printable Disc
Loading Originals
Inserting the Memory Card
Replacing Ink Tanks
42
Loading Paper
Paper Sources
Loading Paper in the Rear Tray
Loading Paper in the Cassette
Loading Envelopes
43
Paper Sources
The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B).
The paper source used depends on the page size and media type.
Supported Media Types
Note
When printing, select the correct page size and media type. If you select the wrong page size or media
type, the printer may feed paper from the wrong paper source or may not print with the proper print
quality.
For details on how to load paper in each paper source, see below.
Loading Paper in the Rear Tray
Loading Paper in the Cassette
Loading Envelopes
44
Loading Paper in the Rear Tray
You can load plain paper or photo paper.
You can also load envelopes on the rear tray.
Loading Envelopes
Important
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial
print, it can cause paper jams.
Note
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see Supported Media Types.
You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour
Paper SAT213.
For the page size and paper weight you can use for this printer, see Supported Media Types.
1.
Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
paper becomes completely flat.
For details on how to flatten curled paper, see Is the paper curled?.
2. Load paper.
1. Open the rear tray cover (A) and then pull up the paper support (B).
45
2. Open the feed slot cover (C).
3.
Slide the paper guides to open them, and load the paper in the center of the rear tray WITH
THE PRINT SIDE FACING UP.
4. Slide the paper guides (D) to align them with both sides of the paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
46
Important
Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can
cause paper jams.
Note
Do not load sheets of paper higher than the load limit mark (G).
5. Close the feed slot cover (H) gently.
Important
If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
47
After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on
the touch screen.
6.
Select the size and type of the loaded paper in the rear tray at Page size and Type, and then
select Register.
When printing starts, the operation panel is opened and the paper output tray is pulled out automatically.
Note
When printing, select the size and type of the loaded paper on the print settings screen of the operation
panel or printer driver.
48
Loading Paper in the Cassette
You can load A4, B5, A5, or Letter-sized plain paper in the cassette.
Note
In the cassette, be sure to load only plain paper.
You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour
Paper SAT213.
For the page size and paper weight you can use for this printer, see Supported Media Types.
1.
Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
paper becomes completely flat.
For details on how to flatten curled paper, see Is the paper curled?.
2.
Pull out the cassette (A) from the printer.
49
3. Remove the cassette cover (B).
4.
Slide the paper guide (C) in front and (D) on the right to open the guides.
5.
Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of
the cassette.
Important
Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F)
can cause paper jams.
Note
Align the paper stack with the edge of the cassette as shown in the figure below.
If the paper stack is in contact with the protrusion (G), the paper may not be fed properly.
50
To load A4 or Letter-sized paper in the cassette, press down the lock (H) on the cassette, then
extend the cassette.
6.
Align the paper guide (I) in front with the paper stack.
Align the paper guide (I) with where it clicks into place.
7.
Slide the paper guide (J) on the right to align the right and left guides with both sides of the
paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Note
Do not load sheets of paper higher than the load limit mark (K).
Keep the paper stack height below the tabs (L) of the paper guides.
8. Mount the cassette cover, and then insert the cassette into the printer.
51
Push the cassette into the printer until it stops.
After inserting the cassette into the printer, the paper information registration screen for the cassette is
displayed on the touch screen.
9.
Select the size and type of the loaded paper in the cassette at Page size, then select
Register.
When printing starts, the operation panel is opened and the paper output tray is pulled out automatically.
Note
When printing, select the size and type of the loaded paper on the print settings screen of the operation
panel or printer driver.
52
Loading Envelopes
You can load Envelope DL and Envelope Com 10 on the rear tray.
The address is automatically rotated and printed according to the envelope's direction by specifying with the
printer driver properly.
Important
Printing of envelopes from the operation panel or from a PictBridge (Wireless LAN) compliant device is
not supported.
Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction.
Envelopes with an embossed or treated surface
Envelopes with a double flap
Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the opposite
direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the printer if they are not flat or the edges are not aligned. Make sure
that no curl or puff exceeds 0.12 inch (3 mm).
2. Load envelopes.
1. Open the rear tray cover (A) and then pull up the paper support (B).
53
2. Open the feed slot cover (C).
3.
Slide the paper guides to open them, and load the envelopes in the center of the rear tray
WITH THE PRINT SIDE FACING UP.
Fold flap of the envelope and load the envelope in the portrait orientation with the address side facing up.
Up to 10 envelopes can be loaded at once.
4. Slide the paper guides (D) to align them with both sides of the envelopes.
Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly.
54
Note
Do not load envelopes higher than the load limit mark (E).
5. Close the feed slot cover (F) gently.
Important
If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
55
After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on
the touch screen.
6. Select the size and type of the loaded envelopes in the rear tray at Page size and Type, and
then select Register.
When printing starts, the operation panel is opened and the paper output tray is pulled out automatically.
Note
The printer may make operating noise when feeding envelopes.
After loading envelopes, select the size and type of the loaded envelopes on the print settings screen of
the printer driver.
56
Placing a Printable Disc
Cautions When Printing on a Printable Disc
Before Placing a Printable Disc
Placing a Printable Disc
Removing a Printable Disc
57
Cautions When Printing on a Printable Disc
Be sure to use the disc tray supplied with this printer. It has a "M" on the upper side.
Do not print on printable discs that are not compatible with inkjet printing. The ink will not dry and may
cause problems with the disc itself or devices which the disc is loaded onto.
Do not print on the printable discs' recording surface. Doing so will make data recorded on discs
unreadable.
Hold the printable discs by their edges. Do not touch either the label surface (printing surface) or
recording surface.
Remove any dirt from the disc tray before placing printable discs on the disc tray. Loading discs in a
dirty disc tray may scratch the recording surface of the discs.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the
disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Do not attach the disc tray while the printer is in operation.
Do not remove the disc tray while printing on printable discs. Doing so may damage the printer, the disc
tray, or the disc.
Do not get dirt or scratches on the reflectors of the disc tray. The printer may not be able to recognize
loading of the printable disc, or printing may become misaligned. If the reflectors on the disc tray
become dirty, wipe the reflector clean with a soft and dry cloth, taking care not to scratch the plate.
The disc tray may become dirty if software other than My Image Garden is used.
To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten
discs when printing more than ten discs continuously.
To stop the printing operation, detach the disc tray from the printer. After approximately three minutes
have elapsed, attach the disc tray to the printer, then resume printing.
58
Before Placing a Printable Disc
The following items are needed to print onto the printable disc:
disc tray (supplied with the printer)
* Use the disc tray with "M" on the surface.
The disc tray may be stored in the disc tray storage compartment of the paper output tray.
4.72 inches (12 cm) printable disc
Obtain a printable disc with a label surface compatible with inkjet printing.
Note
A "printable disc" differs from regular disc (BD/DVD/CD, etc.) in that its label surface has been specially
processed to be printed on by an inkjet printer.
59
Placing a Printable Disc
To print onto a printable disc, place it on the disc tray supplied with the printer, then insert it into the printer.
This procedure also applies to printing from a computer.
Important
Do not attach the disc tray until the message asking you to load the printable disc is displayed. Doing
so can damage the printer.
1.
When the message asking you to load the printable disc is displayed, open the operation
panel (A), and then pick out the disc tray from the disc tray storage compartment (B).
2.
Place the printable disc with the printable surface facing up.
Important
Make sure that there is no dirt on the disc tray before placing a printable disc on the disc tray.
When placing a printable disc on the disc tray, do not touch the printing surface of the disc or the
reflectors (C) on the disc tray.
3. Place the disc tray on the disc tray guide.
60
Note
The disc tray may be ejected after a specified period of time has elapsed. In this case, follow the
on-screen instructions to attach the disc tray.
4. Insert the disc tray straight until the white line on the disc tray guide is almost aligned with
the arrow ( ) on the disc tray.
Important
Do not insert the disc tray beyond the white line on the disc tray guide.
61
Removing a Printable Disc
1. Pull out the disc tray.
2.
Remove the printable disc from the disc tray.
Important
Do not touch the printing surface when removing the disc from the disc tray.
Note
Dry the printing surface sufficiently before removing the disc. If you see printing on the disc tray or
the transparent parts on inner or outer diameter of the printable disc, wipe them off after the
printing surface has dried.
3.
Store the disc tray into the disc tray storage compartment.
When not using the disc tray, insert it straight into the disc tray storage compartment.
62
Loading Originals
Loading Originals on the Platen Glass
Loading Based on Use
Supported Originals
How to Detach / Attach the Document Cover
63
Loading Originals on the Platen Glass
1. Open the document cover.
2. Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass.
Loading Based on Use
Important
Be sure to observe the following when loading the original on the platen glass.
Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down
the original.
Failure to observe the above may cause the scanner to malfunction or the platen glass to break.
3.
Close the document cover gently.
64
Important
After loading the original on the platen glass, be sure to close the document cover before starting to
copy or scan.
65
Loading Based on Use
Load the original in the correct position according to the function to use. If you do not load the original
correctly, it may not be scanned properly.
Loading the Original to Be Aligned with the alignment mark
Load originals to copy
In Scan,
select Auto scan for Doc.type to scan text documents, magazines, or newspapers
select Document or Photo for Doc.type and specify a standard size (A4, Letter, etc.) for Scan
size to scan originals
With a software application on a computer,
scan text documents, magazines, or newspapers
select a standard size (A4, Letter, etc.) to scan originals
Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass and align it with the
alignment mark
. Portions placed on the diagonally striped area cannot be scanned.
Important
The printer cannot scan the striped area (A) (0.04 inch (1 mm) from the edges of the platen glass).
66
Loading Only One Original in the Center of the platen glass
Scan only one disc in Disc label of copy menu
Scan only one printed photo in Photo copy
In Scan,
select Auto scan for Doc.type to scan one printed photo, postcard, business card, or disc
(BD/DVD/CD)
select Photo for Doc.type and specify Auto scan for Scan size to scan one original
Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more space
between the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally striped
area cannot be scanned.
Loading Two or More Originals on the platen glass
Scan two or more printed photos in Photo copy
In Scan,
select Auto scan for Doc.type to scan two or more printed photos, postcards, or business cards
select Photo for Doc.type and specify Auto multi scan for Scan size to scan two or more
originals
Scan two or more printed photos, postcards, or business cards with a software application on a
computer
Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.4 inch (1 cm) or more space
between the edges (diagonally striped area) of the platen glass and the originals, and between the
originals. Portions placed on the diagonally striped area cannot be scanned.
You can place up to 12 items.
A: More than 0.4 inch (1 cm)
67
Note
The Skew Correction function automatically compensates for the originals placed at an angle of up to
approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot
be corrected.
Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.
68
Supported Originals
Item Details
Types of originals - Text document, magazine, or newspaper
- Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.)
Size (width x height) Max. 8.5 x 11.7 inches (216 x 297 mm)
Note
When loading a thick original such as a book on the platen glass, you can load it by removing the
document cover from the printer.
How to Detach / Attach the Document Cover
69
How to Detach / Attach the Document Cover
Detaching the document cover:
Hold up the document cover vertically and then tip it back.
Attaching the document cover:
Fit both hinges (A) of the document cover into the holder (B) and insert both hinges of the document cover
vertically as illustrated below.
70
71
Inserting the Memory Card
Before Inserting the Memory Card
Inserting the Memory Card
Removing the Memory Card
72
Before Inserting the Memory Card
The following types of memory cards and image data are compatible with the printer.
Important
If you took and saved photos on a type of memory card that does not guarantee the operation on your
PictBridge (Wireless LAN) compliant device, the image data may be unreadable on the printer or
damaged. For information on memory cards that your PictBridge (Wireless LAN) compliant device
guarantees operation, refer to the instruction manual supplied with your PictBridge (Wireless LAN)
compliant device.
Format the memory card using a digital camera compliant with the Design rule for Camera File system
(Exif 2.2/2.21/2.3 compliant), TIFF (Exif 2.2/2.21/2.3 compliant). The memory card may not be
compatible with the printer if it is formatted on a computer.
Memory Cards that Do Not Require a Card Adapter
SD Secure Digital memory card, SDHC memory card
Memory Cards that Require a Card Adapter
Be sure to attach the special card adapters to the following memory cards before inserting into the card
slot.
miniSD Card, miniSDHC Card
Use the special "SD Card Adapter".
microSD Card, microSDHC Card
Use the special "SD Card Adapter".
Important
If one of the following memory cards is inserted without the card adapter, you may not be able to
remove the memory card.
Cannot Remove Memory Card
Printable Image Data
This printer accepts images taken with a camera compliant with the Design rule for Camera File
system (Exif 2.2/2.21/2.3 compliant), TIFF (Exif 2.2/2.21/2.3 compliant). Other image or movie types
such as RAW images cannot be printed.
73
The printer accepts images scanned and saved with the printer when Doc.type is set to Photo and
Format is set to JPEG (file extension ".jpg").
Note
This device incorporates exFAT technology licensed from Microsoft.
74
Inserting the Memory Card
Important
When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp is
flashing, the printer is accessing the memory card. In this case, do not touch the area around the card
slot.
Note
When Read/write attribute is set to Writable from USB PC, you cannot print image data from the
memory card using the operation panel of the printer. After using the card slot as the memory card drive
of a computer, remove the memory card, select Device user settings in Device settings, then set
Read/write attribute to Not writable from PC.
Setting Up Card Slot as Memory Card Drive of Computer
When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
from the computer. If you use the operation panel, the photos may not be printed properly.
1.
Prepare your memory card.
Attach a special card adapter if your memory card requires one.
Before Inserting the Memory Card
2.
Turn on the power.
3.
Insert the memory card into the card slot.
Insert your memory card straightforward WITH THE LABELED SIDE FACING UP into the card slot.
When the memory card is inserted properly, the Access lamp (A) will light up.
* Be sure to attach the card adapter to the following types of memory card before inserting to the card
slot.
miniSD Card, miniSDHC Card
microSD Card, microSDHC Card
75
Important
Part of the memory card will protrude from the card slot, but do not force it into the slot any further. This
can damage the printer or the memory card.
Make sure that the memory card is correctly oriented before inserting it into the card slot. If you force
the memory card into the card slot in the wrong orientation, the memory card or the printer can be
damaged.
76
Removing the Memory Card
Important
If you used the card slot as the memory card drive of a computer, you must perform the "safe removal"
operation on your computer before physically removing the memory card from the printer.
Setting Up Card Slot as Memory Card Drive of Computer
1. Make sure that the Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from the printer.
Important
Do not remove the memory card while the Access lamp is flashing. The Access lamp flashes
while the printer is reading or writing data from/to the memory card. If you remove the memory
card or turn off the power while the Access lamp is flashing, the data saved on the memory card
can be damaged.
77
Replacing Ink Tanks
Replacing Ink Tanks
Checking Ink Status on the Touch Screen
Checking the Ink Status with the Ink Lamps
78
Replacing Ink Tanks
When remaining ink cautions or errors occur, the message will appear on the touch screen to inform you of
the error. In this state, the printer cannot print or scan. Take appropriate action according to the message.
An Error Occurs
Note
If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance
Procedure.
For precautionary notes on handling ink tanks, see Notes on ink tanks.
Replacing Procedure
When you need to replace an ink tank, follow the procedure below.
1.
Make sure that the power is turned on.
2.
Open the scanning unit / cover.
The print head holder moves to the replacement position.
Caution
Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder
until it stops completely.
Important
Do not touch the metallic parts or other parts inside the printer.
If the scanning unit / cover is left open for more than 10 minutes, the print head holder moves to
the right. In this case, close and reopen the scanning unit / cover.
3. Remove the ink tank with the lamp flashing fast.
Push the tab (A) and lift the ink tank to remove.
79
Important
Do not touch other parts besides the ink tanks.
Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
Note
Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one
when replacing two or more ink tanks.
For details on ink lamp flashing speed, see Checking the Ink Status with the Ink Lamps.
4.
Take a new ink tank out of its package, remove the orange tape (B) completely, then
remove the protective film (C) completely.
Important
Handle an ink tank carefully. Do not drop or apply excessive pressure to it.
If the orange tape remains on the Y-shape air hole (D), ink may splash or the printer may not
print properly.
80
5. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to
block the Y-shape air hole (D).
6.
Lift up the tab on the orange protective cap (E) to remove it off GENTLY.
Important
Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air
hole (D) blocked, ink may splash.
Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may
stain your hands if you touch them.
Do not reattach the protective cap (E) once you have removed it. Discard it according to the
local laws and regulations regarding disposal of consumables.
7. Insert the front end of the ink tank into the print head at a slant.
Make sure that the position of the ink tank matches the label.
81
8.
Press on the top of the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up.
Important
You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the print head holder.
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
9.
Close the scanning unit / cover.
To close the scanning unit / cover, hold it up once, then take it down gently.
If a message is displayed on the screen, select OK.
Caution
When closing the scanning unit / cover, be careful not to get your fingers caught.
82
Note
If the error message appears after the scanning unit / cover is closed, take appropriate action.
An Error Occurs
When you start printing after replacing the ink tank, the printer starts cleaning the print head
automatically. Do not perform any other operations until the printer completes the cleaning of
the print head.
If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar
symptoms,
align the print head.
The printer may make a noise during these operations, but this does not indicate a problem.
Notes on ink tanks
Important
If you remove an ink tank, replace it immediately. Do not leave the printer with the ink tank removed.
Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.
Furthermore, with such an ink tank, the printer will not be able to inform you when to replace the ink
tank properly.
Once an ink tank has been installed, do not remove it from the printer and leave it out in the open.
This will cause the ink tank to dry out, and the printer may not operate properly when it is reinstalled.
To maintain optimal printing quality, use an ink tank within six months of first use.
Note
Color ink may be consumed even when printing a black-and-white document or when black-and-
white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of
the print head, which may be necessary to maintain the performance of the printer.
When an ink tank is out of ink, replace it immediately with a new one.
Ink Tips
83
Checking Ink Status on the Touch Screen
1. Make sure that the power is turned on, and display the HOME screen.
If the HOME screen is not displayed, press the HOME button to display it.
2.
Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
3.
Select Estimated ink levels.
A symbol appears in the area (A) if there is any information about the remaining ink level.
Example:
The ink is running low. Prepare a new ink tank.
The resulting print quality may not be satisfactory, if printing is continued under this condition.
Note
The above screen shows estimated ink levels.
Tapping Ink number displays the Ink number screen for checking ink numbers. Tapping Print no.
on this screen enables you to print ink numbers. Tapping Order ink now displays the QR code for
accessing the ink purchasing site. Cost of connecting to Internet is to be born by the customer.
You can also check the ink status on a screen of the touch screen displayed while printing.
You can also check the ink status on the computer screen.
For Windows:
Checking Ink Status from Your Computer
For Mac OS:
Checking Ink Status from Your Computer
84
Checking the Ink Status with the Ink Lamps
1. Make sure that the power is turned on.
2. Open the scanning unit / cover.
Replacing Procedure
3.
Check the ink lamp.
Close the scanning unit / cover after checking the ink lamp status.
Replacing Procedure
The ink lamp is on.
The ink tank is correctly installed.
The ink lamp is flashing.
Flashing slowly (at around 3-second intervals)
Lighting for 3 seconds (A) repeats
The ink is running low. Prepare a new ink tank.
The resulting print quality may not be satisfactory, if printing is continued under this condition.
Flashing fast (at around 1-second intervals)
Lighting for 1 second (B) repeats
- The ink tank is installed in the wrong position.
Or
- The ink has run out.
Make sure that the ink tank is installed in the correct position as indicated by the label on the print
head holder. If the position is correct but the lamp flashes, there has been an error and the printer
cannot print. Check the error message displayed on the touch screen.
An Error Occurs
85
The ink lamp is off.
The ink tank is not installed properly or the function for detecting the remaining ink level is
disabled. If the ink tank is not firmly in place, make sure that the orange protective cap has been
removed from the bottom of the ink tank, then press on the top of the ink tank until the ink tank
clicks into place.
If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer
cannot print. Check the error message displayed on the touch screen.
An Error Occurs
Note
You can also check the ink status on the computer screen.
For Windows:
Checking Ink Status from Your Computer
For Mac OS:
Checking Ink Status from Your Computer
86
Maintenance
If Printing Is Faint or Uneven
Performing Maintenance Functions from Your Computer (Windows)
Performing Maintenance Functions from Your Computer (Mac OS)
Cleaning
87
If Printing Is Faint or Uneven
Maintenance Procedure
Printing the Nozzle Check Pattern
Examining the Nozzle Check Pattern
Cleaning the Print Head
Deep Print Head Cleaning
Aligning the Print Head
88
Maintenance Procedure
If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned
printed ruled lines), perform the maintenance procedure below.
Important
Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink
tank.
Note
Make sure that the orange protective tape does not remain on the ink tank.
Open the scanning unit / cover and make sure that the lamp on the ink tank is lit. If the lamp is flashing
or off, take appropriate action.
Checking the Ink Status with the Ink Lamps
Increasing the print quality setting in the printer driver may improve the print result.
For Windows:
Changing the Print Quality and Correcting Image Data
For Mac OS:
Changing the Print Quality and Correcting Image Data
When the Print Results Are Blurred or Uneven:
Step1
Print the nozzle check pattern.
From the printer
Printing the Nozzle Check Pattern
From the computer
For Windows:
Printing a Nozzle Check Pattern
For Mac OS:
Printing a Nozzle Check Pattern
Step2
Examine the nozzle check pattern.
89
If there are missing lines or horizontal white streaks in the pattern:
Step3
Clean the print head.
From the printer
Cleaning the Print Head
From the computer
For Windows:
Cleaning the Print Heads
For Mac OS:
Cleaning the Print Heads
After cleaning the print head, print and examine the nozzle check pattern: Step1
If the problem is not resolved after performing from step 1 to step 3 twice:
Step4
Clean the print head deeply.
From the printer
Deep Print Head Cleaning
From the computer
For Windows:
Cleaning the Print Heads
For Mac OS:
Cleaning the Print Heads
Note
When you have performed the procedure until step 4 and the problem has not been resolved, turn off
the power and clean the print head deeply again after 24 hours.
If the problem is still not resolved, the print head may be damaged. Contact the service center.
When the Print Results Are Not Even such as the Ruled Lines Are
Misaligned:
Step
Align the print head.
From the printer
Aligning the Print Head
From the computer
For Windows:
Adjusting Print Head Position
90
For Mac OS:
Adjusting Print Head Position
91
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink
tank whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the touch
screen. Select A4 or Letter for Page size, then select Register.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Note
Be sure to load paper in the cassette. Even if you load paper on the rear tray, the nozzle check
pattern is not be printed.
3.
Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
4. Select Maintenance.
The Maintenance screen will appear.
5. Select Print nozzle check pattern.
92
The confirmation screen will appear.
6.
Select Yes.
The operation panel is opened and the paper output tray is pulled out automatically.
The nozzle check pattern will be printed and two pattern confirmation screens will appear on the touch
screen.
7.
Examine the nozzle check pattern.
93
Examining the Nozzle Check Pattern
Examine the nozzle check pattern, and clean the print head if necessary.
1. Check if there are missing lines in the pattern C or horizontal white streaks in the pattern D.
A: No missing lines/No horizontal white streaks
B: Lines are missing/Horizontal white streaks are present
E: Number of sheets printed so far
2. Select the pattern that is closer to the printed nozzle check pattern on the confirmation
screen.
94
For A (no missing lines or no horizontal white streaks) in both the pattern C and pattern D:
The cleaning is not required. Select All A, confirm the message, then select OK.
The screen will return to the Maintenance screen.
For B (lines are missing or horizontal white streaks are present) in the pattern C or pattern D, or
in both patterns:
The cleaning is required. Select Also B, then select Yes on the cleaning confirmation screen.
The printer starts cleaning the print head.
Cleaning the Print Head
If the pattern D or any color in the pattern C is not printed:
(Example: Magenta pattern is not printed)
The cleaning is required. Select Also B, then select Yes on the cleaning confirmation screen.
The printer starts cleaning the print head.
Cleaning the Print Head
Note
The total number of sheets printed so far is shown in increments of 50 sheets on the printout of the
nozzle check pattern.
95
Cleaning the Print Head
Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check
pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head
consumes ink, so clean the print head only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the touch
screen. Select A4 or Letter for Page size, then select Register.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Note
Be sure to load paper in the cassette. Even if you load paper on the rear tray, the nozzle check
pattern is not be printed.
3.
Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
4. Select Maintenance.
The Maintenance screen will appear.
5. Select Cleaning.
96
The confirmation screen will appear.
6.
Select Yes.
The printer starts cleaning the print head.
Do not perform any other operations until the printer completes the cleaning of the print head. This takes
about 1 minute.
The pattern print confirmation screen will appear.
7.
Select Yes.
The operation panel is opened and the paper output tray is pulled out automatically.
The nozzle check pattern will be printed.
8.
Examine the nozzle check pattern.
Note
If the problem is not resolved after cleaning the print head twice, clean the print head deeply.
97
Deep Print Head Cleaning
If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the touch
screen. Select A4 or Letter for Page size, then select Register.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Note
Be sure to load paper in the cassette. Even if you load paper on the rear tray, the nozzle check
pattern is not be printed.
3.
Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
4. Select Maintenance.
The Maintenance screen will appear.
5. Select Deep cleaning.
98
The confirmation screen will appear.
6.
Select Yes.
The printer starts cleaning the print head deeply.
Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 1 to 2 minutes.
The pattern print confirmation screen will appear.
7.
Select Yes.
The operation panel is opened and the paper output tray is pulled out automatically.
The nozzle check pattern will be printed.
8.
When the completion message appears, select OK.
9.
Examine the nozzle check pattern.
If a particular color is not printed properly,
replace the ink tank of that color.
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.
If the problem is still not resolved, the print head may be damaged. Contact the service center.
99
Aligning the Print Head
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
Replace the ink tank whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the touch
screen. Select A4 or Letter for Page size, then select Register.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Note
Be sure to load paper in the cassette. Even if you load paper on the rear tray, the print head
alignment sheet is not be printed.
3. Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
4. Select Maintenance.
The Maintenance screen will appear.
5. Select Auto head alignment.
100
The confirmation screen will appear.
6.
Confirm the message, then select Yes.
The operation panel is opened and the paper output tray is pulled out automatically.
The print head alignment sheet will be printed.
Important
Do not touch any printed part on the print head alignment sheet. If the sheet is stained or wrinkled,
it may not be scanned properly.
7. When the message "Did the patterns print correctly?" appears, confirm that the pattern is
printed correctly, then select Yes.
101
8. Confirm the message, then load the print head alignment sheet on the platen glass.
Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark
on the bottom right corner of the sheet with the alignment mark .
9.
Close the document cover gently, then select OK.
The printer starts scanning the print head alignment sheet, and the print head position will be adjusted
automatically.
Important
Do not open the document cover or move the print head alignment sheet on the platen glass until
adjusting the print head position is complete.
If the error message appears on the touch screen, select OK to release the error, then take
appropriate action.
An Error Occurs
10.
When the completion message appears, select OK.
Remove the print head alignment sheet on the platen glass.
Note
If the print results are still not satisfactory after adjusting the print head position as described above,
adjust the print head position manually from the computer.
For Windows:
Adjusting Print Head Position
For Mac OS:
Adjusting Print Head Position
To print and check the current head position adjustment values, select Print the head alignment value
on the Maintenance screen.
102
Cleaning
Cleaning Exterior Surfaces
Cleaning the Platen Glass and Document Cover
Cleaning Paper Feed Rollers
Cleaning Inside the Printer (Bottom Plate Cleaning)
Cleaning Cassette Pads
103
Cleaning Paper Feed Rollers
If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
3.
Select Maintenance.
The Maintenance screen will appear.
4.
Select Roller cleaning.
The confirmation screen will appear.
5. Select Yes.
6. Select Rear tray or Cassette to clean the paper feed roller.
7. Follow the message to remove any paper from the paper source.
If you clean the paper feed roller of cassette, remove any paper from the cassette, then push it back.
8. Select OK.
The operation panel is opened and the paper output tray is pulled out automatically.
The paper feed roller will rotate as it is cleaned without paper.
104
9. Make sure that the paper feed roller has stopped rotating, then follow the message to load
the three sheets of A4 or Letter-sized plain paper.
10. Select OK.
The printer starts cleaning. The cleaning will be complete when the paper is ejected.
11.
When the completion message appears, select OK.
If the problem is not resolved after cleaning the paper feed roller, contact the service center.
105
Cleaning Inside the Printer (Bottom Plate Cleaning)
Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get
dirty, so we recommend performing cleaning regularly.
You need to prepare: a sheet of A4 or Letter-sized plain paper*
* Be sure to use a new piece of paper.
1.
Make sure that the power is turned on.
2.
Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
3.
Select Maintenance.
The Maintenance screen will appear.
4.
Select Bottom plate cleaning.
The confirmation screen will appear.
5. Select Yes.
6. Follow the message to remove any paper from the rear tray, then select OK.
7. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper.
8. Load only this sheet of paper in the rear tray with the open side facing you.
106
9.
Select OK.
The operation panel is opened and the paper output tray is pulled out automatically.
The paper cleans the inside of the printer as it feeds through the printer.
Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
10.
When the completion message appears, select OK.
Note
When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.
If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be
stained. Wipe off any ink from the protrusions using a cotton swab or the like.
Important
Be sure to turn off the power and unplug the power cord before cleaning the printer.
107
Overview
Safety
Safety Precautions
Regulatory Information
WEEE (EU & EEA)
Main Components and Their Use
Main Components
Power Supply
Using the Operation Panel
Changing Settings
Changing Printer Settings from Your Computer (Windows)
Changing Printer Settings from Your Computer (Mac OS)
Changing Settings from Operation Panel
Changing Printer's Setting Using Web Browser
Network Connection
Network Connection Tips
Network Settings (IJ Network Device Setup Utility) (Windows)
IJ Network Device Setup Utility
Starting Up IJ Network Device Setup Utility
Ensuring Optimal Printing Results
Ink Tips
Printing Tips
Check Paper Settings Before Printing
Set Rear Tray/Cassette Paper Information After Loading Paper
Canceling Print Jobs
Printer Handling Precautions
Keeping Print Quality High
108
Transporting Your Printer
Legal Restrictions on Scanning/Copying
Specifications
109
Safety
Safety Precautions
Regulatory Information
WEEE (EU&EEA)
110
Safety Precautions
Choosing a location
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close
to a heating source.
To avoid the risk of fire or electric shocks, use the printer under the operating environment specified in
the Specifications.
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power Supply
Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the
power cord if necessary.
Never remove the plug by pulling on the cord.
Pulling the cord may damage the power cord, leading to possible fire or electrical shock.
Do not use an extension lead/cord.
Working Around the Printer
Never put your hands or fingers in the printer while it is printing.
When moving the printer, carry the printer at both ends. In case the printer weighs more than 14 kg, it
is recommended to have two people lifting the printer. Accidental dropping of the printer causes injury.
For the printer's weight, refer to the Specifications.
Do not place any object on the printer. Especially do not place metal objects (paper clips, staples,
etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the printer.
Do not transport or use the printer on a slant, vertically or upside-down, as the ink may leak and
damage the printer.
When loading a thick book on the platen glass, do not press hard on the Document Cover. The platen
glass may break and cause injury.
Print Heads/Ink Tanks/FINE Cartridges
Keep ink tanks out of the reach of children. In case ink is accidentally licked or swallowed, rinse out
mouth or give one or two glasses of water to drink. If irritation or discomfort occurs, obtain medical
advice immediately.
In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with
skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice
immediately.
Never touch the electrical contacts on a print head or FINE cartridges after printing.
The metal parts may be very hot and could cause burns.
Do not throw ink tanks and FINE cartridges into fire.
Do not attempt to disassemble or modify the print head, ink tanks, and FINE cartridges.
111
Regulatory Information
Users in the U.S.A.
FCC Notice (U.S.A. Only)
For 120V, 60Hz model
Model Number: K10442 (Contains FCC Approved WLAN Module K30365)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you could be required to stop operation of the equipment.
FCC ID:AZDK30365
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The equipment complies with FCC radiation exposure limits for at uncontrolled equipment. This
equipment should be installed and operated with minimum distance at least 20cm between the radiator
and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or
operated with any other antenna or transmitter.
Canon U.S.A., Inc.
One Canon Park
Melville, New York 11747
1-800-652-2666
Users in Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
112
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and
operated keeping the radiator at least 20cm or more away from person's body (excluding extremities:
hands, wrists, feet and ankles).
Pour les usagers résidant au Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet équipement est conforme aux limites d'exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles d'exposition aux fréquences radioélectriques (RF)
CNR-102 de l'IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus
entre le dispositif rayonnant et le corps (à l'exception des extrémités : mains, poignets, pieds et chevilles).
Environmental Information
Reducing your environmental impact
Power Consumption and Operational Modes
The amount of electricity a device consumes depends on the way the device is used. This product is
designed and set in a way to allow you to reduce the power consumption. After the last print it switches
to Ready Mode. In this mode it can print again immediately if required. If the product is not used for a
time, the device switches to its Sleep Mode. The devices consume less power (Watt) in these modes.
Energy Star
®
The Energy Star
®
programme is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to minimise environmental impact.
Products which meet the stringent requirements of the Energy Star
®
programme for both environmental
benefits and the amount of energy consumption will carry the Energy Star
®
logo accordingly.
Paper types
This product can be used to print on both recycled and virgin paper (certified to an environmental
stewardship scheme), which complies with EN12281 or a similar quality standard. In addition it can
support printing on media down to a weight of 64g/m
2
, lighter paper means less resources used and a
lower environmental footprint for your printing needs.
113
WEEE (EU&EEA)
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste, according to
the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a
designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product
or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper
handling of this type of waste could have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste disposal
service. For more information regarding return and recycling of WEEE products, please visit www.canon-
europe.com/weee.
Nur für Europäische Union und EWR (Norwegen, Island und Liechtenstein)
Dieses Symbol weist darauf hin, dass dieses Produkt gemäß der EU-Richtlinie über Elektro- und
Elektronik-Altgeräte (2012/19/EU) und nationalen Gesetzen nicht über den Hausmüll entsorgt werden
darf. Dieses Produkt muss bei einer dafür vorgesehenen Sammelstelle abgegeben werden. Dies kann z.
B. durch Rückgabe beim Kauf eines ähnlichen Produkts oder durch Abgabe bei einer autorisierten
Sammelstelle für die Wiederaufbereitung von Elektro- und Elektronik-Altgeräten geschehen. Der
unsachgemäße Umgang mit Altgeräten kann aufgrund potentiell gefährlicher Stoffe, die generell mit
Elektro- und Elektronik-Altgeräten in Verbindung stehen, negative Auswirkungen auf die Umwelt und die
menschliche Gesundheit haben. Durch die umweltgerechte Entsorgung dieses Produkts tragen Sie
außerdem zu einer effektiven Nutzung natürlicher Ressourcen bei. Informationen zu Sammelstellen für
Altgeräte erhalten Sie bei Ihrer Stadtverwaltung, dem öffentlich-rechtlichen Entsorgungsträger, einer
autorisierten Stelle für die Entsorgung von Elektro- und Elektronik-Altgeräten oder Ihrem örtlichen
Entsorgungsunternehmen. Weitere Informationen zur Rückgabe und Entsorgung von Elektro- und
Elektronik-Altgeräten finden Sie unter www.canon-europe.com/weee.
Union Européenne, Norvège, Islande et Liechtenstein uniquement.
Ce symbole indique que ce produit ne doit pas être jeté avec les ordures ménagères, conformément à la
directive DEEE (2012/19/UE) et à la réglementation de votre pays. Ce produit doit être confié au
distributeur à chaque fois que vous achetez un produit neuf similaire, ou à un point de collecte mis en
114
place par les collectivités locales pour le recyclage des Déchets des Équipements Électriques et
Électroniques (DEEE). Le traitement inapproprié de ce type de déchet risque d'avoir des répercussions
sur l'environnement et la santé humaine, du fait de la présence de substances potentiellement
dangereuses généralement associées aux équipements électriques et électroniques. Parallèlement, votre
entière coopération dans le cadre de la mise au rebut correcte de ce produit favorisera une meilleure
utilisation des ressources naturelles. Pour plus d'informations sur les points de collecte des équipements
à recycler, contactez vos services municipaux, les autorités locales compétentes, le plan DEEE approuvé
ou le service d'enlèvement des ordures ménagères. Pour plus d'informations sur le retour et le recyclage
des produits DEEE, consultez le site: www.canon-europe.com/weee.
Uitsluitend bestemd voor de Europese Unie en EER (Noorwegen, IJsland en
Liechtenstein)
Dit symbool geeft aan dat dit product in overeenstemming met de AEEA-richtlijn (2012/19/EU) en de
nationale wetgeving niet mag worden afgevoerd met het huishoudelijk afval. Dit product moet worden
ingeleverd bij een aangewezen, geautoriseerd inzamelpunt, bijvoorbeeld wanneer u een nieuw
gelijksoortig product aanschaft, of bij een geautoriseerd inzamelpunt voor hergebruik van elektrische en
elektronische apparatuur (EEA). Een onjuiste afvoer van dit type afval kan leiden tot negatieve effecten op
het milieu en de volksgezondheid als gevolg van potentieel gevaarlijke stoffen die veel voorkomen in
elektrische en elektronische apparatuur (EEA). Bovendien werkt u door een juiste afvoer van dit product
mee aan het effectieve gebruik van natuurlijke hulpbronnen. Voor meer informatie over waar u uw
afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw
woonplaats, de reinigingsdienst, of het afvalverwerkingsbedrijf. U kunt ook het schema voor de afvoer van
afgedankte elektrische en elektronische apparatuur (AEEA) raadplegen. Ga voor meer informatie over het
inzamelen en recyclen van afgedankte elektrische en elektronische apparatuur naar www.canon-
europe.com/weee.
Sólo para la Unión Europea y el Área Económica Europea (Noruega,
Islandia y Liechtenstein)
Este símbolo indica que este producto no debe desecharse con los desperdicios domésticos, de acuerdo
con la directiva RAEE (2012/19/UE) y con la legislación nacional. Este producto debe entregarse en uno
de los puntos de recogida designados, como por ejemplo, entregándolo en el lugar de venta al comprar
un producto similar o depositándolo en un lugar de recogida autorizado para el reciclado de residuos de
aparatos eléctricos y electrónicos (RAEE). La manipulación inapropiada de este tipo de desechos podría
tener un impacto negativo en el entorno y la salud humana, debido a las sustancias potencialmente
peligrosas que normalmente están asociadas con los RAEE. Al mismo tiempo, su cooperación a la hora
de desechar correctamente este producto contribuirá a la utilización eficazde los recursos naturales. Para
más información sobre cómo puede eliminar el equipo para su reciclado, póngase en contacto con las
autoridades locales, con las autoridades encargadas de los desechos, con un sistema de gestión RAEE
115
autorizado o con el servicio de recogida de basuras doméstico. Si desea más información acerca de la
devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee.
Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega,
Islàndia i Liechtenstein)
Aquest símbol indica que aquest producte no s’ha de llençar a les escombraries de la llar, d’acord amb la
Directiva RAEE (2012/19/UE) i la legislació nacional. Aquest producte s’hauria de lliurar en un dels punts
de recollida designats, com per exemple, intercanviant-lo un per un en comprar un producte similar o
lliurant-lo en un lloc de recollida autoritzat per al reciclatge de residus d’aparells elèctrics i electrònics
(AEE). La manipulació inadequada d’aquest tipus de residus podria tenir un impacte negatiu en l’entorn i
en la salut humana, a causa de les substàncies potencialment perilloses que normalment estan
associades als AEE. Així mateix, la vostra cooperació a l’hora de llençar correctament aquest producte
contribuirà a la utilització efectiva dels recursos naturals. Per a més informació sobre els punts on podeu
lliurar aquest producte per procedir al seu reciclatge, adreceu-vos a la vostra oficina municipal, a les
autoritats encarregades dels residus, al pla de residus homologat per la RAEE o al servei de recollida de
deixalles domèstiques de la vostra localitat. Per a més informació sobre la devolució i el reciclatge de
productes RAEE, visiteu www.canon-europe.com/weee.
Solo per Unione Europea e SEE (Norvegia, Islanda e Liechtenstein)
Questo simbolo indica che il prodotto deve essere oggetto di raccolta separata in conformità alla Direttiva
RAEE (2012/19/UE) e alla normativa locale vigente. Il prodotto deve essere smaltito presso un centro di
raccolta differenziata, un distributore autorizzato che applichi il principio dell'"uno contro uno", ovvero del
ritiro della vecchia apparecchiatura elettrica al momento dell'acquisto di una nuova, o un impianto
autorizzato al riciclaggio dei rifiuti di apparecchiature elettriche ed elettroniche. La gestione impropria di
questo tipo di rifiuti può avere un impatto negativo sull'ambiente e sulla salute umana causato dalle
sostanze potenzialmente pericolose che potrebbero essere contenute nelle apparecchiature elettriche ed
elettroniche. Un corretto smaltimento di tali prodotti contribuirà inoltre a un uso efficace delle risorse
naturali ed eviterà di incorrere nelle sanzioni amministrative di cui all'art. 255 e successivi del Decreto
Legislativo n. 152/06. Per ulteriori informazioni sullo smaltimento e il recupero dei Rifiuti di
Apparecchiature Elettriche ed Elettroniche, consultare la Direttiva RAEE, rivolgersi alle autorità
competenti, oppure visitare il sito www.canon-europe.com/weee.
Apenas para a União Europeia e AEE (Noruega, Islândia e Liechtenstein)
116
Este símbolo indica que o produto não deve ser colocado no lixo doméstico, de acordo com a Directiva
REEE (2012/19/UE) e a legislação nacional. Este produto deverá ser colocado num ponto de recolha
designado, por exemplo, num local próprio autorizado quando adquirir um produto semelhante novo ou
num local de recolha autorizado para reciclar resíduos de equipamentos eléctricos e electrónicos (EEE).
O tratamento inadequado deste tipo de resíduo poderá causar um impacto negativo no ambiente e na
saúde humana devido às substâncias potencialmente perigosas normalmente associadas aos
equipamentos eléctricos e electrónicos. Simultaneamente, a sua cooperação no tratamento correcto
deste produto contribuirá para a utilização eficaz dos recursos naturais. Para mais informações sobre os
locais onde o equipamento poderá ser reciclado, contacte os serviços locais, a autoridade responsável
pelos resíduos, o esquema REEE aprovado ou o serviço de tratamento de lixo doméstico. Para mais
informações sobre a devolução e reciclagem de produtos REEE, vá a www.canon-europe.com/weee.
Gælder kun i Europæiske Union og EØS (Norge, Island og Liechtenstein)
Dette symbol angiver, at det pågældende produkt ikke må bortskaffes sammen med dagrenovation jf.
direktivet om affald af elektrisk og elektronisk udstyr (WEEE) (2012/19/EU) og gældende national
lovgivning. Det pågældende produkt skal afleveres på et nærmere specificeret indsamlingssted, f.eks. i
overensstemmelse med en godkendt én-til-én-procedure, når du indkøber et nyt tilsvarende produkt, eller
produktet skal afleveres på et godkendt indsamlingssted for elektronikaffald. Forkert håndtering af denne
type affald kan medføre negative konsekvenser for miljøet og menneskers helbred på grund af de
potentielt sundhedsskadelige stoffer, der generelt kan forefindes i elektrisk og elektronisk udstyr. Når du
foretager korrekt bortskaffelse af det pågældende produkt, bidrager du til effektiv brug af
naturressourcerne. Yderligere oplysninger om, hvor du kan bortskaffe dit elektronikaffald med henblik på
genanvendelse, får du hos de kommunale renovationsmyndigheder. Yderligere oplysninger om
returnering og genanvendelse af affald af elektrisk og elektronisk udstyr får du ved at besøge www.canon-
europe.com/weee.
Μόνο για την Ευρωπαϊκή Ένωση και τον ΕΟΧ (Νορβηγία, Ισλανδία και
Λιχτενστάιν)
Αυτό το σύμβολο υποδηλώνει ότι αυτό το προϊόν δεν πρέπει να απορρίπτεται μαζί με τα οικιακά
απορρίμματα, σύμφωνα με την Οδηγία σχετικά με τα Απόβλητα Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού
(ΑΗΗΕ) (2012/19/ΕΕ) και την εθνική σας νομοθεσία. Αυτό το προϊόν πρέπει να παραδίδεται σε
καθορισμένο σημείο συλλογής, π.χ. σε μια εξουσιοδοτημένη βάση ανταλλαγής όταν αγοράζετε ένα νέο
παρόμοιο προϊόν ή σε μια εξουσιοδοτημένη θέση συλλογής για την ανακύκλωση των αποβλήτων
Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (ΗΗΕ). Ο ακατάλληλος χειρισμός αυτού του τύπου αποβλήτων
μπορεί να έχει αρνητικό αντίκτυπο στο περιβάλλον και την υγεία του ανθρώπου, λόγω δυνητικώς
επικίνδυνων ουσιών που γενικά συνδέονται με τον ΗΗΕ. Ταυτόχρονα, η συνεργασία σας όσον αφορά τη
σωστή απόρριψη αυτού του προϊόντος θα συμβάλει στην αποτελεσματική χρήση των φυσικών πόρων. Για
περισσότερες πληροφορίες σχετικά με τα σημεία όπου μπορείτε να απορρίψετε τον εξοπλισμό σας για
117
ανακύκλωση, επικοινωνήστε με το τοπικό γραφείο της πόλης σας, την υπηρεσία απορριμμάτων, το
εγκεκριμένο σχήμα ΑΗΗΕ ή την υπηρεσία απόρριψης οικιακών αποβλήτων. Για περισσότερες
πληροφορίες σχετικά με την επιστροφή και την ανακύκλωση των προϊόντων ΑΗΗΕ, επισκεφθείτε την
τοποθεσία www.canon-europe.com/weee.
Gjelder kun den europeiske union og EØS (Norge, Island og Liechtenstein)
Dette symbolet indikerer at dette produktet ikke skal kastes sammen med husholdningsavfall, i henhold til
WEEE-direktiv (2012/19/EU) og nasjonal lov. Produktet må leveres til et dertil egnet innsamlingspunkt, det
vil si på en autorisert en-til-en-basis når du kjøper et nytt lignende produkt, eller til et autorisert
innsamlingssted for resirkulering av avfall fra elektrisk og elektronisk utstyr (EE-utstyr). Feil håndtering av
denne typen avfall kan være miljø- og helseskadelig på grunn av potensielt skadelige stoffer som ofte
brukes i EE-utstyr. Samtidig bidrar din innsats for korrekt avhending av produktet til effektiv bruk av
naturressurser. Du kan få mer informasjon om hvor du kan avhende utrangert utstyr til resirkulering ved å
kontakte lokale myndigheter, et godkjent WEEE-program eller husholdningens renovasjonsselskap. Du
finner mer informasjon om retur og resirkulering av WEEE-produkter på www.canon-europe.com/weee.
Vain Euroopan unionin sekä ETA:n (Norja, Islanti ja Liechtenstein) alueelle.
Tämä tunnus osoittaa, että sähkö- ja elektroniikkalaiteromua koskeva direktiivi (SER-direktiivi,
2012/19/EU) sekä kansallinen lainsäädäntö kieltävät tuotteen hävittämisen talousjätteen mukana. Tuote
on vietävä asianmukaiseen keräyspisteeseen, esimerkiksi kodinkoneliikkeeseen uutta vastaavaa tuotetta
ostettaessa tai viralliseen sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Sähkö- ja
elektroniikkalaiteromun virheellinen käsittely voi vahingoittaa ympäristöä ja ihmisten terveyttä, koska
laitteet saattavat sisältää ympäristölle ja terveydelle haitallisia aineita. Lisäksi tuotteen asianmukainen
hävittäminen säästää luonnonvaroja. Lisätietoja sähkö- ja elektroniikkalaiteromun keräyspisteistä saat
kaupunkien ja kuntien tiedotuksesta, jätehuoltoviranomaisilta, sähkö- ja elektroniikkalaiteromun
kierrätysjärjestelmän ylläpitäjältä ja jätehuoltoyhtiöltä. Lisätietoja sähkö- ja elektroniikkalaiteromun
keräyksestä ja kierrätyksestä on osoitteessa www.canon-europe.com/weee.
Endast för Europeiska unionen och EES (Norge, Island och Liechtenstein)
Den här symbolen visar att produkten enligt WEEE-direktivet (2012/19/EU) och nationell lagstiftning inte
får sorteras och slängas som hushållsavfall. Den här produkten ska lämnas in på en därför avsedd
insamlingsplats, t.ex. på en återvinningsstation auktoriserad att hantera elektrisk och elektronisk
utrustning (EE-utrustning) eller hos handlare som är auktoriserade att byta in varor då nya, motsvarande
118
köps (en mot en). Olämplig hantering av avfall av den här typen kan ha en negativ inverkan på miljön och
människors hälsa på grund av de potentiellt farliga ämnen som kan återfinnas i elektrisk och elektronisk
utrustning. Din medverkan till en korrekt avfallshantering av den här produkten bidrar dessutom till en
effektiv användning av naturresurserna. Kontakta ditt lokala kommunkontor, berörd myndighet, företag för
avfallshantering eller ta del av en godkänd WEEE-organisation om du vill ha mer information om var du
kan lämna den kasserade produkten för återvinning. För mer information om inlämning och återvinning av
WEEE-produkter, se www.canon-europe.com/weee.
Pouze Evropská unie a EHP (Norsko, Island a Lichtenštejnsko)
Tento symbol znamená, že podle směrnice o OEEZ (2012/19/EU) a podle vnitrostátních právních
předpisů nemá být tento výrobek likvidován s odpadem z domácností. Tento výrobek má být vrácen do
sběrného místa, např. v rámci autorizovaného systému odběru jednoho výrobku za jeden nově prodaný
podobný výrobek nebo v autorizovaném sběrném místě pro recyklaci odpadních elektrických a
elektronických zařízení (OEEZ). Nevhodné nakládání s tímto druhem odpadu by mohlo mít negativní
dopad na životní prostředí a lidské zdraví, protože elektrická a elektronická zařízení zpravidla obsahují
potenciálně nebezpečné látky. Vaše spolupráce na správné likvidaci tohoto výrobku současně napomůže
efektivnímu využívání přírodních zdrojů. Další informace o místech sběru vašeho odpadního zařízení
k recyklaci vám sdělí místní úřad vaší obce, správní orgán vykonávající dozor nad likvidací odpadu,
sběrny OEEZ nebo služba pro odvoz komunálního odpadu. Další informace týkající se vracení a
recyklace OEEZ naleznete na adrese www.canon-europe.com/weee.
Csak az Európai Unió és az EGT (Norvégia, Izland és Liechtenstein)
országaiban
Ez a szimbólum azt jelzi, hogy a helyi törvények és a WEEE-irányelv (2012/19/EU) szerint a termék nem
kezelhető háztartási hulladékként. A terméket a kijelölt nyilvános gyűjtőpontokon kell leadni, például
hasonló cserekészülék vásárlásakor, illetve bármelyik, elektromos és elektronikai berendezésekből
származó hulladék (WEEE) átvételére feljogosított gyűjtőponton. Az ilyen jellegű hulladékok a nem
megfelelő kezelés esetén a bennük található veszélyes anyagok révén ártalmasak lehetnek a környezetre
és az emberek egészségére. Továbbá, a termékből származó hulladék megfelelő kezelésével
hozzájárulhat a természetes nyersanyagok hatékonyabb hasznosításához. A berendezésekből származó,
újrahasznosítható hulladékok elhelyezésére vonatkozó további tudnivalókért forduljon a helyi
önkormányzathoz, a közterület-fenntartó vállalathoz, a háztartási hulladék begyűjtését végző vállalathoz,
illetve a hivatalos WEEE-képviselethez. További tudnivalókat a WEEE-termékek visszajuttatásáról és
újrahasznosításáról a www.canon-europe.com/weee.
119
Tylko dla krajów Unii Europejskiej oraz EOG (Norwegia, Islandia i
Liechtenstein)
Ten symbol oznacza, że zgodnie z dyrektywą WEEE dotyczącą zużytego sprzętu elektrycznego i
elektronicznego (2012/19/UE) oraz przepisami lokalnymi nie należy wyrzucać tego produktu razem z
odpadami gospodarstwa domowego. Produkt należy przekazać do wyznaczonego punktu gromadzenia
odpadów, np. firmie, od której kupowany jest nowy, podobny produkt lub do autoryzowanego punktu
gromadzenia zużytego sprzętu elektrycznego i elektronicznego w celu poddania go recyklingowi.
Usuwanie tego typu odpadów w nieodpowiedni sposób może mieć negatywny wpływ na otoczenie i
zdrowie innych osób ze względu na niebezpieczne substancje stosowane w takim sprzęcie. Jednocześnie
pozbycie się zużytego sprzętu w zalecany sposób przyczynia się do właściwego wykorzystania zasobów
naturalnych. Aby uzyskać więcej informacji na temat punktów, do których można dostarczyć sprzęt do
recyklingu, prosimy skontaktować się z lokalnym urzędem miasta, zakładem utylizacji odpadów,
skorzystać z instrukcji zatwierdzonej dyrektywą WEEE lub skontaktować się z przedsiębiorstwem
zajmującym się wywozem odpadów domowych. Więcej informacji o zwracaniu i recyklingu zużytego
sprzętu elektrycznego i elektronicznego znajduje się w witrynie www.canon-europe.com/weee.
Platí len pre štáty Európskej únie a EHP (Nórsko, Island a Lichtenštajnsko)
Tento symbol znamená, že podľa Smernice 2012/19/EÚ o odpade z elektrických a elektronických
zariadení (OEEZ) a podľa platnej legislatívy Slovenskej republiky sa tento produkt nesmie likvidovať spolu
s komunálnym odpadom. Produkt je potrebné odovzdať do určenej zberne, napr. prostredníctvom výmeny
za kúpu nového podobného produktu, alebo na autorizované zberné miesto, ktoré spracúva odpad z
elektrických a elektronických zariadení (EEZ). Nesprávna manipulácia s takýmto typom odpadu môže mať
negatívny vplyv na životné prostredie a ľudské zdravie, pretože elektrické a elektronické zariadenia
obsahujú potenciálne nebezpečné látky. Spoluprácou na správnej likvidácii produktu prispejete
k účinnému využívaniu prírodných zdrojov. Ďalšie informácie o mieste recyklácie opotrebovaných
zariadení získate od miestneho úradu, úradu životného prostredia, zo schváleného plánu OEEZ alebo od
spoločnosti, ktorá zaisťuje likvidáciu komunálneho odpadu. Viac informácií nájdete aj na webovej stránke:
www.canon-europe.com/weee.
Üksnes Euroopa Liit ja EMP (Norra, Island ja Liechtenstein)
See sümbol näitab, et antud toodet ei tohi vastavalt elektri- ja elektroonikaseadmete jäätmeid käsitlevale
direktiivile (2012/19/EL) ning teie riigis kehtivatele õigusaktidele utiliseerida koos olmejäätmetega. Antud
toode tuleb anda selleks määratud kogumispunkti, nt müügipunkt, mis on volitatud üks ühe vastu
vahetama, kui ostate uue sarnase toote, või elektri- ja elektroonikaseadmete jäätmete ümbertöötlemiseks
120
mõeldud kogumispunkti. Täiendava teabe saamiseks elektri- ja elektroonikaseadmetest tekkinud jäätmete
tagastamise ja ümbertöötlemise kohta võtke ühendust kohaliku omavalitsusega, asjakohase
valitsusasutusega, asjakohase tootjavastutusorganisatsiooniga või olmejäätmete käitlejaga. Lisateavet
leitate ka Interneti-leheküljelt www.canon-europe.com/weee.
Tikai Eiropas Savienībai un EEZ (Norvēģijai, Islandei un Lihtenšteinai)
Šis simbols norāda, ka atbilstoši ES Direktīvai (2012/19/ES) par elektrisko un elektronisko iekārtu
atkritumiem (EEIA) un vietējiem tiesību aktiem no šī izstrādājuma nedrīkst atbrīvoties, izmetot to kopā ar
sadzīves atkritumiem. Šis izstrādājums ir jānodod piemērotā savākšanas vietā, piemēram, apstiprinātā
veikalā, kur iegādājaties līdzīgu jaunu produktu un atstājat veco, vai apstiprinātā vietā izlietotu elektrisko
un elektronisko iekārtu pārstrādei. Nepareiza šāda veida atkritumu apsaimniekošana var apdraudēt vidi
un cilvēka veselību tādu iespējami bīstamu vielu dēļ, kas parasti ir elektriskajās un elektroniskajās
iekārtās. Turklāt jūsu atbalsts pareizā šāda veida atkritumu apsaimniekošanā sekmēs efektīvu dabas
resursu izmantošanu. Lai saņemtu pilnīgāku informāciju par vietām, kur izlietoto iekārtu var nodot
pārstrādei, sazinieties ar vietējo pašvaldību, atkritumu savākšanas atbildīgo dienestu, pilnvarotu EEIA
struktūru vai sadzīves atkritumu apsaimniekošanas iestādi. Lai saņemtu plašāku informāciju par elektrisko
un elektronisko iekārtu nodošanu pārstrādei, apmeklējiet tīmekļa vietni www.canon-europe.com/weee.
Tik Europos Sąjungai ir EEE (Norvegijai, Islandijai ir Lichtenšteinui)
Šis ženklas reiškia, kad gaminio negalima išmesti su buitinėmis atliekomis, kaip yra nustatyta Direktyvoje
(2012/19/ES) ir nacionaliniuose teisė aktuose dėl EEĮ atliekų tvarkymo. Šį gaminį reikia atiduoti į tam
skirtą surinkimo punktą, pvz., pagal patvirtintą keitimo sistemą, kai perkamas panašus gaminys, arba į
elektros ir elektroninės įrangos (EEĮ) atliekų perdirbimo punktą. Netinkamas tokios rūšies atliekų
tvarkymas dėl elektros ir elektroninėje įrangoje esančių pavojingų medžiagų gali pakenkti aplinkai ir
žmonių sveikatai. Padėdami užtikrinti tinkamą šio gaminio šalinimo tvarką, kartu prisidėsite prie
veiksmingo gamtos išteklių naudojimo. Jei reikia daugiau informacijos, kaip šalinti tokias atliekas, kad jos
būtų toliau perdirbamos, kreipkitės į savo miesto valdžios institucijas, atliekų tvarkymo organizacijas,
patvirtintų EEĮ atliekų sistemų arba jūsų buitinių atliekų tvarkymo įstaigų atstovus. Išsamesnės
informacijos apie EEĮ atliekų grąžinimo ir perdirbimo tvarką galite rasti apsilankę tinklalapyje www.canon-
europe.com/weee.
Samo za Evropsko unijo in EGP (Norveška, Islandija in Lihtenštajn)
121
Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/19/EU) in državno zakonodajo ne
smete odvreči v gospodinjske odpadke. Ta izdelek morate odložiti na ustrezno zbiralno mesto, na primer
pri pooblaščenem prodajalcu, ko kupite podoben nov izdelek ali na zbiralno mesto za recikliranje
električne in elektronske opreme. Neprimerno ravnanje s takšnimi odpadki lahko negativno vpliva na
okolje in človekovo zdravje zaradi nevarnih snovi, ki so povezane z električno in elektronsko opremo. S
pravilno odstranitvijo izdelka hkrati prispevate tudi k učinkoviti porabi naravnih virov. Če želite več
informacij o tem, kje lahko odložite odpadno opremo za recikliranje, pokličite občinski urad, komunalno
podjetje ali službo, ki skrbi za odstranjevanje odpadkov, ali si oglejte načrt OEEO. Če želite več informacij
o vračanju in recikliranju izdelkov v skladu z direktivo OEEO, obiščite www.canon-europe.com/weee.
Само за Европейския съюз и ЕИП (Норвегия, Исландия и Лихтенщайн)
Този символ показва, че този продукт не трябва да се изхвърля заедно с битовите отпадъци,
съгласно Директивата за ИУЕЕО (2012/19/ЕC) и Вашето национално законодателство. Този продукт
трябва да бъде предаден в предназначен за целта пункт за събиране, например на база размяна,
когато купувате нов подобен продукт, или в одобрен събирателен пункт за рециклиране на излязло
от употреба електрическо и електронно оборудване (ИУЕЕО). Неправилното третиране на този тип
отпадъци може да доведе до евентуални отрицателни последствия за околната среда и човешкото
здраве поради потенциално опасните вещества, които обикновено са свързани с ЕЕО. В същото
време Вашето съдействие за правилното изхвърляне на този продукт ще допринесе за
ефективното използване на природните ресурси. Повече информация относно местата, където
може да предавате излязло от употреба оборудване за рециклиране, може да получите от местните
власти, от органа, отговорен за отпадъците и от одобрена система за излязло от употреба ЕЕО или
от Вашата местна служба за битови отпадъци. За повече информация относно връщането и
рециклирането на продукти от излязло от употреба ЕЕО посетете www.canon-europe.com/weee.
Doar pentru Uniunea Europeană şi EEA (Norvegia, Islanda şi Liechtenstein)
Acest simbol indică faptul că acest produs nu trebuie aruncat o dată cu reziduurile menajere, în
conformitate cu Directiva DEEE (Directiva privind deşeurile de echipamente electrice şi electronice)
(2012/19/UE) şi legile naţionale. Acest produs trebuie transportat la un punct de colectare special, de
exemplu un centru care preia produsele vechi atunci când achiziţionaţi un produs nou similar, sau la un
punct de colectare autorizat pentru reciclarea deşeurilor provenite de la echipamentele electrice şi
electronice (EEE). Mânuirea necorespunzătoare a acestor tipuri de deşeuri poate avea un impact negativ
asupra mediului înconjurător şi sănătăţii indivizilor, din cauza substanţelor potenţial nocive care sunt în
general asociate cu EEE. În acelaşi timp, cooperarea dvs. la reciclarea corectă a acestui produs va
contribui la utilizarea efectivă a resurselor naturale. Pentru mai multe informaţii privind locurile de reciclare
a deşeurilor provenite de la echipamente, contactaţi biroul primăriei locale, autoritatea responsabilă cu
colectarea deşeurilor, schema DEEE aprobată sau serviciul de colectare a deşeurilor menajere. Pentru
122
mai multe informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/
weee.
Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn)
Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi
(2012/19/EC) i vašem nacionalnom zakonu. Ovaj proizvod je potrebno predati na posebno mjesto za
sakupljanje otpada, npr. na ovlašteno mjesto gdje možete zamijeniti staro za novo ukoliko kupujete novi
sličan proizvod ili na ovlašteno mjesto za sakupljanje rabljene električne i elektroničke opreme (EEE) za
recikliranje. Nepropisno rukovanje ovom vrstom otpada može imati negativan učinak na okolinu i zdravlje
ljudi zbog supstanci koje su potencijalno opasne za zdravlje, a općenito se povezuju s EEE. Istovremeno,
vaša će suradnja kroz propisno odlaganje ovog proizvoda doprinijeti efektivnoj uporabi prirodnih resursa.
Za više informacija o tome gdje možete odložiti svoj otpad za recikliranje obratite se vašem lokalnom
gradskom uredu, komunalnoj službi, odobrenom WEEE programu ili službi za odlaganje kućnog otpada.
Ostale informacije o vraćanju i recikliranju WEEE proizvoda potražite na www.canon-europe.com/weee.
Korisnici u Srbiji
Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa ostalim kućnim otpadom, u skladu sa
WEEE Direktivom (2012/19/EU) i nacionalnim zakonima. Ovaj proizvod treba predati određenom centru
za prikupljanje, npr. na osnovi "jedan-za-jedan" kada kupujete sličan novi proizvod, ili ovlašćenom centru
za prikupljanje za reciklažu istrošene električne i elektronske opreme (EEE). Nepravilno rukovanje ovom
vrstom otpada može da ima moguće negativne posledice po životnu sredinu i ljudsko zdravlje usled
potencijalno opasnih materijala koji se uglavnom vezuju za EEE. U isto vreme, vaša saradnja na
ispravnom odlaganju ovog proizvoda će doprineti efikasnom korišćenju prirodnih resursa. Za više
informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da
kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više
informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/weee.
123
Main Components and Their Use
Main Components
Power Supply
Using the Operation Panel
124
Main Components
Front View
Rear View
Inside View
Operation Panel
125
Front View
(1) operation panel
Use to change the settings of the printer or to operate it. Opens automatically when the printer starts
printing.
Operation Panel
(2) document cover
Open to load an original on the platen glass.
(3) feed slot cover
Prevents anything from falling into the feed slot.
Open it to slide the paper guides, and close it before printing.
(4) paper support
Extend to load paper in the rear tray.
(5) rear tray cover
Open to load paper in the rear tray.
(6) rear tray
Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.
Loading Paper in the Rear Tray
Loading Envelopes
(7) paper guides
Align with both sides of the paper stack.
126
(8) cassette
Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.
Loading Paper in the Cassette
(9) paper guides
Align with right/left/front sides of the paper stack.
(10) cassette cover
Detach to load paper in the cassette.
(11) paper output tray
Comes out automatically when the printer starts printing. Printed paper is ejected.
(12) paper output support
Extend to support ejected paper.
(13) card slot
Insert a memory card.
Before Inserting the Memory Card
(14) Access lamp
Lights or flashes to indicate the memory card status.
Inserting the Memory Card
(15) disc tray storage compartment
The disc tray supplied with the printer can be stored here.
(16) disc tray guide
Attach the disc tray.
127
(17) platen glass
Load an original here.
128
Rear View
(1) rear cover
Detach when removing jammed paper.
(2) transport unit
Open when removing jammed paper.
(3) power cord connector
Plug in the supplied power cord.
(4) wired LAN connector
Plug in the LAN cable to connect the printer to a LAN.
(5) USB port
Plug in the USB cable to connect the printer with a computer.
Important
Do not touch the metal casing.
129
Do not plug in or unplug the USB cable while the printer is printing or scanning originals with the
computer.
130
Inside View
(1) scanning unit / cover
Scans originals. Also, lift and open it to replace an ink tank, to check the ink lamp, or to remove jammed
paper inside the printer.
(2) ink lamps
Lights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(3) print head holder
The print head is pre-installed.
Note
For details on replacing an ink tank, see Replacing Ink Tanks.
131
Operation Panel
* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
(1) ON button/POWER lamp
Turns the power on or off. Lights after flashing when the power is turned on. Before turning on the
power, make sure that the document cover is closed.
(2) touch screen
Displays messages, menu items, and the operational status. Directly touch the screen lightly with your
finger tip to select a menu item or displayed button. You can also preview photos on a memory card
before printing.
Basic Operation of the touch screen
(3) NFC (Near Field Communication) mark
Pass an NFC-enabled smartphone, etc. with a Canon NFC-compliant application installed on it over this
mark to perform printing and other operations.
132
Power Supply
Confirming that the Power Is On
Turning the Printer On and Off
Checking the Power Plug/Power Cord
Unplugging the Printer
133
Confirming that the Power Is On
The POWER lamp is lit when the printer is turned on.
Even if the touch screen is off, if the POWER lamp is lit, the printer is on.
Note
It may take a while for the printer to start printing immediately after you turn on the printer.
The touch screen display will turn off if the printer is not operated for about 10 minutes. To restore the
display, press any button except the ON button or touch the touch screen. The print operation from a
computer can also restore the display.
134
Turning the Printer On and Off
Turning on the printer
1. Press the ON button to turn on the printer.
The POWER lamp flashes and then remains lit.
Confirming that the Power Is On
Note
It may take a while for the printer to start printing immediately after you turn on the printer.
If an error message is displayed on the touch screen, see An Error Occurs.
You can set the printer to automatically turn on when a print or scan operation is performed from
a computer connected by USB cable or wireless network. This feature is set to off by default.
From the printer
ECO settings
From the computer
For Windows:
Managing the Printer Power
For Mac OS:
Managing the Printer Power
Turning off the printer
1. Press the ON button to turn off the printer.
When the POWER lamp stops flashing, the printer is turned off.
135
Important
When you unplug the power cord after turning off the printer, be sure to confirm that the
POWER lamp is off.
Note
You can set the printer to automatically turn off when no operations are performed or no print
jobs are sent to the printer for a certain interval. This feature is set to on by default.
From the printer
ECO settings
From the computer
For Windows:
Managing the Printer Power
For Mac OS:
Managing the Printer Power
136
Checking the Power Plug/Power Cord
Unplug the power cord once a month to confirm that the power plug/power cord does not have anything
unusual described below.
The power plug/power cord is hot.
The power plug/power cord is rusty.
The power plug/power cord is bent.
The power plug/power cord is worn.
The power plug/power cord is split.
Caution
If you find anything unusual with the power plug/power cord described above, Unplugging the Printer
and call for service. Using the printer with one of the unusual conditions above may cause a fire or an
electric shock.
137
Unplugging the Printer
To unplug the power cord, follow the procedure below.
Important
When you unplug the power cord, press the ON button, then confirm that the POWER lamp is off.
Unplugging the power cord while the POWER lamp is lit or flashing may cause drying or clogging of the
print head and print quality may be reduced.
1.
Press the ON button to turn the printer off.
Note
After pressing the ON button, the confirmation screen asking if you retract the paper output tray
will appear on the touch screen. To retract the paper output tray, select Yes.
2.
Confirm that the POWER lamp is off.
3. Unplug the power cord.
The specification of the power cord differs depending on the country or region of use.
138
Using the Operation Panel
The operation panel consists of the ON button (A) and touch screen (B).
Touch the HOME screen on the touch screen with your finger tip to select menus for copying, scanning, and
other functions.
Operations on the Home Screen
A: ON button
B: touch screen
Basic Operation of the touch screen
Buttons on the touch screen
Basic Operation of the touch screen
Touch the touch screen lightly with your finger tip or move your finger to access various functions or
settings.
Important
When operating the touch screen, make sure to avoid the followings, which may cause the printer to
malfunction or damage the printer.
Strongly pressing the touch screen.
Pressing the touch screen with other than your finger (especially with sharpened tips, such as on
ballpoint pens, pencils, or nails).
Touching the touch screen with wet or dirty hands.
Placing any objects on the touch screen.
Do not attach a protective sheet on the touch screen. Removing it may damage the touch screen.
Tap
Touch lightly with your finger tip and immediately release.
Use to select an item or photo on the screen.
139
Touch
Touch lightly with your finger tip.
To move forward (or go back) menus or photos continuously, keep touching the forward (or back) mark.
Flick
Flick your finger on the screen up, down, left, or right.
Use to switch menus or move forward or backward through photos.
Drag
While lightly touching the screen, move your finger up, down, left, or right.
Use to view lists of items or move sliders.
140
Operations on the Home Screen
Display the menu screen or the settings screen from the Home screen.
C. Basic menu
Select to copy or scan using the operation panel. After selecting a basic menu, the particular menus
are displayed.
D. Network status
Displays the current network status. Select to display the basic network information or to change the
network settings.
The icon differs depending on the network of use or the network status.
Wireless LAN is enabled and the printer is connected to the wireless router.
Note
Depending on the signal state, the icon will change.
(Signal strength: 81 % or more): You can use the printer over a wireless LAN without any
problems.
(Signal strength: 51 % or more): The problem such as the printer cannot print may occur
according to the network status. We recommends placing the printer near the wireless router.
141
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur.
Place the printer near the wireless router.
Wireless LAN is enabled but the printer is not connected to the wireless router.
Wired LAN is enabled.
Wireless Direct is enabled.
Wireless LAN and Wired LAN are disabled.
E. Cloud
Displays the cloud's Main screen. You can use the services of PIXMA/MAXIFY Cloud Link.
F. Setup
Displays the printer's setting menus or the maintenance menus.
G. Quick guide
Displays the guides how to loading paper or how to replace the ink tank, or the troubleshooting.
Buttons on the touch screen
While operating on the touch screen, some buttons are displayed on the touch screen.
H. HOME button
Displays the HOME screen.
I. Black button
Starts black & white copying, scanning, etc.
J. Color button
Starts color copying, scanning, etc.
K. Back button
142
Returns the touch screen to the previous screen.
L. Stop button
Cancels operation when print, copy, or scan job is in progress.
143
Changing Settings
Changing Printer Settings from Your Computer (Windows)
Changing Printer Settings from Your Computer (Mac OS)
Changing Settings from Operation Panel
Changing Printer's Setting Using Web Browser
144
Changing Printer Settings from Your Computer (Windows)
Changing the Print Options
Registering a Frequently Used Printing Profile
Managing the Printer Power
Changing the Printer Operation Mode
145
Changing the Print Options
You can change the detailed printer driver settings for print data that is sent from an application software.
Check this check box if part of the image data is cut off, the paper source during printing differs from the
driver settings, or printing fails.
The procedure for changing the print options is as follows:
1.
Open the printer driver setup window
2.
Click Print Options... on the Page Setup tab
The Print Options dialog box opens.
Note
When you use the XPS printer driver, the functions available to you are different.
3. Change the individual settings
If necessary, change the setting of each item, and then click OK.
146
The Page Setup tab is displayed again.
147
Registering a Frequently Used Printing Profile
You can register the frequently used printing profile to Commonly Used Settings on the Quick Setup tab.
Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
Registering a Printing Profile
1.
Open the printer driver setup window
2.
Set the necessary items
From Commonly Used Settings on the Quick Setup tab, select the printing profile to be used and if
necessary, change the settings after Additional Features.
You can also register necessary items on the Main and Page Setup tabs.
3.
Click Save...
The Save Commonly Used Settings dialog box opens.
4. Save the settings
148
Enter a name in the Name field. If necessary, click Options..., set the items, and then click OK.
In the Save Commonly Used Settings dialog box, click OK to save the print settings and return to the
Quick Setup tab.
The name and icon are displayed in Commonly Used Settings.
Important
To save the page size, orientation, and number of copies that was set in each sheet, click Options...,
and check each item.
Note
When you re-install the printer driver or upgrade the printer driver version, the print settings that are
already registered will be deleted from Commonly Used Settings.
Registered print settings cannot be saved and preserved. If a profile is deleted, register the print
settings again.
Deleting Unnecessary Printing Profile
1.
Select the printing profile to be deleted
Select the printing profile you want to delete from the Commonly Used Settings list on the Quick
Setup tab.
2.
Delete the printing profile
Click Delete. When the confirmation message appears, click OK.
The selected printing profile is deleted from the Commonly Used Settings list.
Note
Printing profiles that are registered in the initial settings cannot be deleted.
149
Managing the Printer Power
This function allows you to manage the printer power from the printer driver.
The procedure for managing the printer power is as follows:
Power Off
The Power Off function turns off the printer. When you use this function, you will not be able to turn the
printer on from the printer driver.
1.
Open the printer driver setup window
2.
Execute power off
Click Power Off on the Maintenance tab. When the confirmation message appears, click OK.
The printer power switches off, and the Maintenance tab is displayed again.
Auto Power
Auto Power allows you to set Auto Power On and Auto Power Off.
The Auto Power On function automatically turns on the printer when data is received.
The Auto Power Off function automatically turns off the printer when there are no operations from the
printer driver or the printer for a specified period of time.
1.
Open the printer driver setup window
2.
Make sure that the printer is on and then click Auto Power on the Maintenance tab
The Auto Power Settings dialog box opens.
Note
If the printer is off or if communication between the printer and the computer is disabled, an
error message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
3. If necessary, complete the following settings:
Auto Power On
Specifying Enable from the list will turn the printer on upon receipt of print data.
Auto Power Off
Specify the time from the list. When this time lapses without any operations from the printer driver
or the printer, the printer is turned off automatically.
4. Apply the settings
150
Click OK. When the confirmation message appears, click OK.
The Maintenance tab is displayed again.
The setting is enabled after this. When you want to disable this function, select Disable from the list
according to the same procedure.
Note
When the printer is turned off, the Canon IJ Status Monitor message varies depending on the Auto
Power On setting.
When the setting is Enable, "Printer is standing by" is displayed. When the setting is Disable,
"Printer is offline" is displayed.
151
Changing the Printer Operation Mode
If necessary, switch between various modes of printer operation.
The procedure for configuring Custom Settings is as follows:
Custom Settings
1.
Open the printer driver setup window
2.
Make sure that the printer is on, and then click Custom Settings on the Maintenance
tab
The Custom Settings dialog box opens.
Note
If the printer is off or if communication between the printer and the computer is disabled, an
error message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
3.
If necessary, complete the following settings:
Detects a printable disc in the disc tray
Detects whether a printable disc is loaded on the disc tray during disc label printing and displays a
message if a disc is not loaded.
Check this check box to print with detecting whether a printable disc is loaded.
Uncheck this check box to print without detecting whether a printable disc is loaded.
Important
If you leave this check box unchecked, the printer may print to the disc tray even if a printable
disc is not loaded on the disc tray. Therefore, you should check this check box under normal
circumstances.
If you load a printable disc that has already been printed onto the disc tray, the printer may
detect that no printable disc is loaded on the disc tray. In this case, uncheck this check box.
Prevent paper abrasion
The printer can increase the gap between the print head and the paper during high-density
printing to prevent paper abrasion.
Check this check box to prevent paper abrasion.
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head
alignment, but you can change it to manual head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head
alignment.
Check this check box to perform the manual head alignment. Uncheck this check box to perform
the automatic head alignment.
152
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the
Orientation.
To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print
data 90 degrees to the right during printing, clear this item.
Important
Do not change this setting while the print job is displayed in the print wait list. Otherwise,
characters may be omitted or the layout may become corrupt.
Don't detect mismatch of paper settings when printing from computer
When you print documents from your computer and the paper settings in the printer driver and the
paper information registered on the printer do not match, this setting disables the message
display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
Ink Drying Wait Time
You can set the length of the printer rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page
dries, increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
4.
Apply the settings
Click OK and when the confirmation message appears, click OK.
The printer operates with the modified settings hereafter.
153
Changing Settings from Operation Panel
Changing Settings from Operation Panel
Setting Items on Operation Panel
Print settings
LAN settings
Device user settings
PictBridge print settings
Language selection
Firmware update
Feed settings
Reset setting
Web service setup
System information
ECO settings
Quiet setting
154
Changing Settings from Operation Panel
This section describes the procedure to change the settings in the Device settings screen, taking the steps
to specify Extended copy amount as an example.
1. Make sure printer is turned on.
2.
Select Setup on the HOME screen.
Using the Operation Panel
3.
Select Settings.
4.
Select Device settings.
The Device settings screen is displayed.
5.
Select a setting item to adjust.
The setting screen for the selected item is displayed.
6.
Select a setting item.
7. Select a setting to specify.
155
For more on setting items on the operation panel:
Setting Items on Operation Panel
156
Setting Items on Operation Panel
Items for Printer
Device user settings
Web service setup
Language selection
ECO settings
Quiet setting
Items for Paper/Printing
Print settings
Feed settings
PictBridge print settings
Items for Maintenance/Management
System information
Firmware update
LAN settings
Reset setting
157
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
Be sure to set this back to OFF after printing since it may result in lower printing speed or lower
print quality.
Extended copy amount
Selects the amount of image that extends off the paper when printing in borderless (full).
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You
can change the width to be cropped from the borders of the original image as needed.
Important
This setting can be applied under the following conditions:
- Performing borderless copying
- Borderless is selected for Border when copying printed photos
Note
If printouts contain margins even though you are printing in Borderless, specifying Extended
amount: Large for this setting may help solve the problem.
Adjust disc print area
You can adjust the disc printing area if the image is not aligned with the printable disc.
You can adjust the printing area in increments of 0.003 inches/0.1 mm between -0.03 inches/-0.9 mm
and +0.03 inches/+0.9 mm.
Auto photo fix setting
When ON is selected, you can select whether to print photos using the Exif information recorded in the
image files in the following cases.
Auto photo fix is selected for Photo fix when printing from a memory card.
The print setting on the PictBridge (Wireless LAN) compliant device is set to Default* or On when
printing with a PictBridge (Wireless LAN) compliant device.
* When Default is selected for the print setting on the PictBridge (Wireless LAN) compliant device,
select Auto photo fix for Photo fix in PictBridge print settings.
Adjust horizontal print position
Adjusts the print position when the left/right margins are not aligned.
You can adjust the left/right margins in increments of 0.01 inch/0.1 mm between -0.12 inch/-3 mm and
+0.12 inch/+3 mm centered on the horizontal center of the paper.
158
Important
For Letter-sized or Legal-sized paper, you can adjust the left/right margins between -0.06 inch/-1.5
mm and +0.06 inch/+1.5 mm even if you specify the value over 0.06 inch/1.5 mm.
159
LAN settings
Wireless LAN
Wireless Direct
Wired LAN
Common settings
Wireless LAN
WLAN active/inactive
Enables/disables wireless LAN.
Wireless LAN setup
Selects the setup method for wireless LAN connection.
Easy wireless connect
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
Manual connect
Select when you perform settings for wireless LAN manually using the operation panel of the
printer.
WPS (Push button method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
Other setup
Advanced setup
Select when you perform settings for wireless LAN manually. You can specify multiple WEP
keys.
WPS (PIN code method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
WLAN setting list
The list of wireless LAN settings of this printer is displayed on the touch screen.
Select Print details and then Yes to print the list.
Printing Network Settings
Important
The network settings printout contains important information about your network. Handle it with
care.
The following setting items are displayed. (Some setting items are not displayed depending on the
printer settings.)
160
Items Setting
SSID XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters)
Wireless LAN security Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-
PSK(TKIP)/WPA2-PSK(AES)
Signal strength (%) XXX
IPv4 address XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)
IPv6 address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
MAC address of wireless LAN XX:XX:XX:XX:XX:XX (12 characters)
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
Root cert. thumbprint (SHA-1) XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
Root cert. thumbprint (SHA-256) XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
("XX" represents alphanumeric characters.)
Wireless Direct
Wireless Direct active/inactive
Enables/disables Wireless Direct.
Update SSID/password
Selecting Yes updates the identifier (SSID) and password for Wireless Direct.
Change device name
Changes the printer's name displayed on a Wi-Fi Direct compatible device.
Connection request confirmation
Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting
the printer.
Wireless Direct setting list
The list of Wireless Direct settings of this printer is displayed on the touch screen.
161
Select Print details and then Yes to print the list.
Printing Network Settings
Important
The network settings printout contains important information about your network. Handle it with
care.
The following setting items are displayed. (Some setting items are not displayed depending on the
printer settings.)
Items Setting
SSID DIRECT-XXXX-TS9000series
Password XXXXXXXXXX (10 characters)
Wireless LAN security WPA2-PSK(AES)
IPv4 address XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)
IPv6 address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
MAC address of wireless LAN XX:XX:XX:XX:XX:XX (12 characters)
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
Wireless Direct device name XXXXXX-XXXXXXseries
No. of devices connected now XX/XX
Root cert. thumbprint (SHA-1) XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
Root cert. thumbprint (SHA-256) XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
("XX" represents alphanumeric characters.)
Wired LAN
Wired LAN active/inactive
Enables/disables wired LAN.
162
LAN setting list
The list of wired LAN settings of this printer is displayed on the touch screen.
Select Print details and then Yes to print the list.
Printing Network Settings
Important
The network settings printout contains important information about your network. Handle it with
care.
The following setting items are displayed. (Some setting items are not displayed depending on the
printer settings.)
Items Setting
IPv4 address XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)
IPv6 address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
MAC address of wired LAN XX:XX:XX:XX:XX:XX (12 characters)
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
Root cert. thumbprint (SHA-1) XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
Root cert. thumbprint (SHA-256) XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
("XX" represents alphanumeric characters.)
Common settings
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
You cannot use the same printer name as that already used for other LAN connected devices.
You cannot use a hyphen for the initial or last character of the printer name.
TCP/IP settings
Performs IPv4 or IPv6 setting.
163
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows
8, Windows 7, and Windows Vista).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 8.1, Windows 8, Windows 7, and Windows Vista.
Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
Timeout setting
Specifies the timeout length.
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
LPR protocol setting
Enables/disables the LPR setting.
RAW protocol
Enables/disables RAW printing.
LLMNR
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printer
to detect printer's IP address from the printer name without a DNS server.
PictBridge communication
Setting items for printing from a PictBridge (Wireless LAN) compliant device.
Enable/disable communication
Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device.
Timeout setting
Specifies the timeout length.
164
Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
IPsec settings
Selecting Active allows you to specify the IPsec security.
165
Device user settings
Date display format
Changes the display format of dates when printed.
Note
When ON is selected for Print date on the print settings screen in printing from a memory card, the
date is printed in the date display format you selected.
Setting Items for Photo Printing Using Operation Panel
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting.
Setting Up Card Slot as Memory Card Drive of Computer
If you set this setting to Writable from USB PC, you cannot print photos on a memory card using
the operation panel of the printer. After you finish operation of the memory card dedicated drive, be
sure to set it back to Not writable from PC. When you turn off the printer, Writable from USB PC
will be canceled and the setting is returned to Not writable from PC when you turn on the printer
next time.
When Writable from USB PC is selected, the auto power off setting is inactive.
For more on the auto power off setting:
ECO settings
Sound control
Selects the volume.
Keypad volume
Selects the beep volume when tapping the touch screen or the buttons on the operation panel.
Alarm volume
Selects the alarm volume.
Device info sending setting
Selects whether you will send the printer usage information to Canon server. The information sent to
Canon will be utilized to develop better products. Select Agree to send the printer usage information to
Canon server.
NFC setting
If you select Enable, you can print or scan using NFC (Near Field Communication).
Energy saving settings
Allows you to turn on/off the printer automatically to save electricity.
Auto power off
166
Specifies the length of time to turn off the printer automatically when no operation is made or no
printing data is sent to the printer.
Auto power on
Selecting ON enables the printer to turn on automatically when a scanning command from a
computer or printing data is sent to the printer.
You can also enter this setting menu by selecting ECO settings and Energy saving settings on
the HOME screen.
ECO settings
Document removal reminder
Selects whether the printer will display the reminder screen in case you forget to remove the original
from the platen glass after scanning.
Important
Depending on the type of original or the state of the document cover, forgetting to remove the
original may not be detected.
Auto retract paper output tray
When ON is selected, the confirmation screen asking if you retract the paper output tray automatically
appears after pressing the ON button to turn off the printer.
167
Language selection
Changes the language for the messages and menus on the touch screen.
168
Firmware update
You can update the firmware of the printer, check the firmware version, or perform settings of a notification
screen, a DNS server and a proxy server.
Note
Only Check current version is available when Inactive is selected for WLAN active/inactive of
Wireless LAN in LAN settings.
Install update
Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the on-
screen instructions to perform update.
Important
When you use this function, make sure the printer is connected to the Internet.
Note
If the firmware update is not complete, check the following and take an appropriate action.
Check the network settings such as a wireless router.
If Cannot connect to the server. is displayed on the touch screen, select OK and try again
after a while.
Check current version
You can check the current firmware version.
Update notification setting
When Yes is selected and the firmware update is available, the screen to inform you of the firmware
update is displayed on the touch screen.
DNS server setup
Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,
follow the display on the touch screen to perform settings.
Proxy server setup
Performs settings for a proxy server. Follow the display on the touch screen to perform settings.
169
Feed settings
By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent
the printer from misprinting by displaying the message before printing starts when the paper size or the
media type of the loaded paper differs from the print settings.
For details:
Paper Settings
Register paper information
Registers the paper size and the media type you load on the rear tray and in the cassette.
Note
Plain paper can only be loaded in the cassette.
When you register the paper size and the media type, the screen to select whether you apply the
settings to those for copying is displayed. Select Yes to apply the registered settings to copying.
For more on the combination of paper settings you can specify by the printer driver or on the touch
screen:
For Windows:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
For Mac OS:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
Detect paper setting mismatch
If you select Yes, the printer detects whether the paper size and the media type are identical with those
registered in Register paper information. If printing starts with the settings that do not match, an error
message is displayed on the touch screen.
Note
When No is selected, Register paper information is disabled.
170
Reset setting
You can set the settings back to the default.
Web service setup only
Sets the Web service settings back to the default.
LAN settings only
Sets the LAN settings back to the default.
Settings only
Sets the settings such as the paper size or media type back to the default.
Device info sending setting only
Sets only the device information sending settings back to the default.
Reset all
Sets all settings you made to the printer back to the default. The administrator password specified by
Remote UI or IJ Network Device Setup Utility reverts to the default setting.
Note
You cannot set the following setting items back to the default:
The language displayed on the touch screen
The current position of the print head
CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
171
System information
To display this menu, select System information on Setup.
Current version
Displays the current firmware version.
Printer name
Displays the printer name currently specified.
Serial number
Displays the printer serial number.
MAC address of wireless LAN
Displays the MAC address for wireless LAN.
MAC address of wired LAN
Displays the MAC address for wired LAN.
172
ECO settings
This setting allows you to use automatic duplex printing as a default to save paper and to turn on/off the
printer automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure printer is turned on.
2.
Select Setup on the HOME screen.
Using the Operation Panel
3.
Select Settings.
4.
Select ECO.
5.
Select Two-sided printing setting.
6.
Specify settings as necessary.
A.
Tap to select two-sided copying as a default.
B.
Tap to select two-sided printing of template forms on the printer as a default.
Note
When duplex printing is selected, the icon is displayed on the setting items for duplex
printing on each print setting screen.
173
Using Power Saving Function
Follow the procedure below to use power saving function.
1. Make sure printer is turned on.
2. Select Setup on the HOME screen.
Using the Operation Panel
3.
Select Settings.
4.
Select ECO.
5.
Select Energy saving settings.
6.
Check on-screen instructions and select Next.
7.
Specify settings as necessary.
A.
Specify the length of time to turn the printer off automatically when no operation is made or no
printing data is sent to the printer.
B.
Selecting ON enables the printer to turn on automatically when a scanning command from a
computer or printing data is sent to the printer.
174
Network Connection
Network Connection Tips
175
Network Connection Tips
Default Network Settings
Another Printer Found with Same Name
Connecting to Another Computer via LAN/Changing from USB to LAN
Connection
Printing Network Settings
Changing LAN Connection Method/Changing Wireless LAN Connection Method
176
Default Network Settings
LAN Connection Defaults
Item Default
Enable/Disable LAN Disable LAN
SSID BJNPSETUP
Wireless LAN security Disable
IP address (IPv4) Auto setup
IP address (IPv6) Auto setup
Set printer name* XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Enable
Timeout setting 15 minutes
Enable/disable Bonjour Enable
Service name Canon TS9000 series
LPR protocol setting Enable
RAW protocol Enable
LLMNR Active
PictBridge communication Enable
Wired LAN DRX setting Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item Default
SSID (Identifier for wireless direct) DIRECT-abXX-TS9000series *1
Password YYYYYYYYYY *2
Wireless LAN security WPA2-PSK (AES)
Wireless Direct device name ZZZZZZ-TS9000series *3
Connection request confirmation Displayed
177
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is
specified when the printer is turned on for the first time.)
*2 The password is specified automatically when the printer is turned on for the first time.
*3 "ZZZZZZ" represents last six digits of printer's MAC address.
178
Another Printer Found with Same Name
When the printer is found during setup, other printers with the same name may appear on the results
screen.
Select a printer with checking the printer settings against those on detection result screen.
For Windows:
Check the printer's MAC address or serial to select the correct printer from the results.
For Mac OS:
The printer names appear with the MAC address added at the end or as the printer name specified by
Bonjour.
Check identifiers such as the MAC address, the printer name specified by Bonjour, and the printer's
serial number to select the printer from among those that appear.
Note
Serial number may not appear on result screen.
Check the printer's MAC address and the serial number by one of the following methods.
Display on the touch screen.
MAC address
LAN settings
Serial number
System information
Print the network settings.
Printing Network Settings
179
Connecting to Another Computer via LAN/Changing from USB to
LAN Connection
For Windows:
For Mac OS:
For Windows:
To add a computer to connect to the printer on a LAN or to change from USB to LAN connection, perform
setup using the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
To connect an additional computer to the printer via LAN, or to change from USB to LAN connection,
follow the instructions on the Canon website.
180
Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
The network settings printout contains important information about your network. Handle it with care.
1.
Make sure printer is turned on.
If the HOME screen is not displayed, press the HOME button.
2.
Load three sheets of A4 or Letter-sized plain paper.
3.
Tap (Network status) icon.
Using the Operation Panel
The menu screen appears.
4.
Check message and tap Yes.
5.
Tap Print details.
6.
Tap Yes.
The printer starts printing network settings information.
The printed network settings information is as follows: (Some setting values are not displayed depending
on the printer settings.)
Item Description Setting
Product Information Product information
Product Name Product name XXXXXXXX
ROM Version ROM version XXXXXXXX
Serial Number Serial number XXXXXXXX
Wireless LAN Wireless LAN Enable/Disable
MAC Address MAC address XX:XX:XX:XX:XX:XX
Infrastructure Infrastructure Enable/Disable
Connection Connection status Active/Inactive
SSID SSID Wireless LAN SSID
Channel Channel XX (1 to 11)
181
Encryption Encryption method None/WEP/TKIP/AES
WEP Key Length WEP key length (bits) Inactive/128/64
Authentication Authentication method None/auto/open/shared/WPA-PSK/WPA2-
PSK
Signal Strength Signal strength 0 to 100 [%]
TCP/IPv4 TCP/IPv4 Enable
IP Address IP address XXX.XXX.XXX.XXX
Subnet Mask Subnet mask XXX.XXX.XXX.XXX
Default Gateway Default gateway XXX.XXX.XXX.XXX
TCP/IPv6 TCP/IPv6 Enable/Disable
Link Local Address Link local address XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Link Local Prefix Length Link local prefix length XXX
Stateless Address1 Stateless address 1 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length1 Stateless prefix length 1 XXX
Stateless Address2 Stateless address XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length2 Stateless prefix length 2 XXX
Stateless Address3 Stateless address 3 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length3 Stateless prefix length 3 XXX
Stateless Address4 Stateless address 4 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length4 Stateless prefix length 4 XXX
Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default Gateway2 Default gateway 2 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default Gateway3 Default gateway 3 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
182
IPsec IPsec setting Active
Security Protocol Security method ESP/ESP & AH/AH
Wireless Direct Wireless direct Enable/Disable
Connection Connection status Active/Inactive
SSID SSID Wireless Direct SSID
Password Password Wireless Direct password (10 alphanumeric
characters)
Channel Channel 3
Encryption Encryption method AES
Authentication Authentication method WPA2-PSK
TCP/IPv4 TCP/IPv4 Enable
IP Address IP address XXX.XXX.XXX.XXX
Subnet Mask Subnet mask XXX.XXX.XXX.XXX
Default Gateway Default gateway XXX.XXX.XXX.XXX
TCP/IPv6 TCP/IPv6 Enable/Disable
Link Local Address Link local address XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Link Local Prefix Length Link local prefix length XXX
IPsec IPsec setting Active
Security Protocol Security method
Wired LAN Wired LAN Enable/Disable
MAC Address MAC address XX:XX:XX:XX:XX:XX
Connection Wired LAN status Active/Inactive
TCP/IPv4 TCP/IPv4 Enable
IP Address IP address XXX.XXX.XXX.XXX
Subnet Mask Subnet mask XXX.XXX.XXX.XXX
Default Gateway Default gateway XXX.XXX.XXX.XXX
TCP/IPv6 TCP/IPv6 Enable/Disable
Link Local Address Link local address XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
183
Link Local Prefix Length Link local prefix length XXX
Stateless Address1 Stateless address 1 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length1 Stateless prefix length 1 XXX
Stateless Address2 Stateless address 2 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length2 Stateless prefix length 2 XXX
Stateless Address3 Stateless address 3 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length3 Stateless prefix length 3 XXX
Stateless Address4 Stateless address 4 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless Prefix Length4 Stateless prefix length 4 XXX
Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default Gateway2 Default gateway 2 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default Gateway3 Default gateway 3 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
IPsec IPsec setting Active
Security Protocol Security method ESP/ESP & AH/AH
Wired LAN DRX Discontinuous reception (wired LAN) Enable/Disable
Other Settings Other settings
Printer Name Printer name Printer name (Up to 15 alphanumeric char-
acters)
Direct Conn. DevName Device name for wireless direct (Up
to 32 characters)
Device name for wireless direct
WSD Printing WSD printing setting Enable/Disable
WSD Timeout Timeout 1/5/10/15/20 [min]
LPD Printing LPD printing setting Enable/Disable
RAW Printing RAW printing setting Enable/Disable
184
Bonjour Bonjour setting Enable/Disable
Bonjour Service Name Bonjour service name Bonjour service name (Up to 52 alphanumer-
ic characters)
LLMNR LLMNR setting Enable/Disable
SNMP SNMP setting Enable/Disable
PictBridge Commun. PictBridge communication Enable/Disable
DNS Server Obtain DNS server address automat-
ically
Auto/Manual
Primary Server Primary server address XXX.XXX.XXX.XXX
Secondary Server Secondary server address XXX.XXX.XXX.XXX
Proxy Server Proxy server setting Enable/Disable
Proxy Address Proxy address XXXXXXXXXXXXXXXXXXXX
Proxy Port Proxy port specification 1 to 65535
Cert. Fingerprt(SHA-1) Certificate fingerprint(SHA-1) XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
Cert. Fingerprt(SHA-256) Certificate fingerprint(SHA-256) XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX
("XX" represents alphanumeric characters.)
185
Changing LAN Connection Method/Changing Wireless LAN
Connection Method
Changing LAN Connection Method
Changing Wireless LAN Connection Method
Changing LAN Connection Method
Follow either procedure below to change LAN connection method (wired or wireless).
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
Tap the icon on the lower left on HOME screen, select Yes and select Wireless LAN -> WLAN
active/inactive -> Active, or select Wired LAN -> Wired LAN active/inactive -> Active
according to the connection method you want to use.
After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.
For details, refer to Performing/Changing Wireless LAN Settings or Performing/Changing Wired
LAN Settings.
For Mac OS:
Follow the instructions on the Canon website to redo setup.
Changing Wireless LAN Connection Method
Follow either procedure below to change wireless LAN connection method (infrastructure or wireless
direct).
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
Important
Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless
connect mode on the printer following the procedure below.
1. Make sure printer is turned on.
If the HOME screen is not displayed, press the HOME button.
2. Tap (Network status) icon.
Using the Operation Panel
3. Check message and tap Yes.
4. Tap LAN settings.
5. Tap Wireless LAN.
6. Tap Wireless LAN setup.
7. Tap Easy wireless connect.
186
8. Check message and tap Yes.
Follow instructions on your smartphone or tablet.
9. If message saying setup is completed appears, tap OK.
For Mac OS:
Follow the instructions on the Canon website to redo setup.
187
Ensuring Optimal Printing Results
Ink Tips
Printing Tips
Check Paper Settings Before Printing
Set Rear Tray/Cassette Paper Information After Loading Paper
Canceling Print Jobs
Printer Handling Precautions
Keeping Print Quality High
Transporting Your Printer
188
Transporting Your Printer
When relocating the printer, make sure of the following.
Important
Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient
protective material to ensure safe transport.
With the print head and ink tank left installed in the printer, press the ON button to turn off the power.
This allows the printer to automatically cap the print head, thus preventing it from drying.
After packing, do not tilt the box containing the printer or turn it on its side or upside down. Doing so
may cause the ink to leak during transport and cause damage to the printer.
When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to
keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1.
Turn the printer off.
2.
Confirm that the POWER lamp is off and unplugging the power cord.
Important
Do not unplug the printer while the POWER lamp is lit or flashing, as it may cause malfunction or
damage to the printer, making the printer unable to print.
3.
Retract the paper output tray.
4. Close the operation panel and the rear tray.
5. If the cassette is extended, contract it.
6. Unplug the printer cable from the computer and from the printer, then unplug the power
cord from the printer.
7. Use adhesive tape to secure all the covers on the printer to keep them from opening during
transportation. Then pack the printer in the plastic bag.
8. Attach the protective material to the printer when packing the printer in the box.
189
Legal Restrictions on Scanning/Copying
Scanning, printing, copying, or modifying copies of the following may be punishable under law.
This list is non-exhaustive. When in doubt, check with a local legal representative.
Paper money
Money orders
Certificates of deposit
Postage stamps (canceled or uncanceled)
Identification badges or insignia
Selective service or draft papers
Checks or drafts issued by governmental agencies
Motor vehicle licenses and certificates of title
Traveler's checks
Food stamps
Passports
Immigration papers
Internal revenue stamps (canceled or uncanceled)
Bonds or other certificates of indebtedness
Stock certificates
Copyrighted works or works of art, without the owner's consent
190
Specifications
General Specifications
Printing resolution (dpi) 9600* (horizontal) x 2400 (vertical)
* Ink droplets can be placed with a pitch of 1/9600 inch at minimum.
Interface USB Port:
Hi-Speed USB *1
LAN Port:
Wired LAN: 100BASE-TX / 10BASE-T
Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2
*1 A computer that complies with Hi-Speed USB standard is required. Since
the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can
be used at USB 1.1.
*2 Setup possible through Standard setup, WPS (Wi-Fi Protected Setup), WCN
(Windows Connect Now) or Easy wireless connect.
USB and LAN can be used at the same time.
Wireless LAN and wired LAN cannot be used at the same time.
Print width 8 inches/203.2 mm
(for Borderless Printing: 8.5 inches/216 mm)
Printable area Borderless printing: Top/Bottom/Left/Right margin: 0.00 inch (0.0 mm)
Standard printing:
-Top margin: 0.12 inch (3.0 mm) * For Art Paper: 1.38 inches (35.0 mm)
-Bottom margin: 0.20 inch (5.0 mm) * For Art Paper: 1.38 inches (35.0 mm)
-Left margin:
Letter/Legal: 0.26 inch (6.4 mm)
Other sizes: 0.14 inch (3.4 mm)
-Right margin:
Letter/Legal: 0.25 inch (6.3 mm)
Other sizes: 0.14 inch (3.4 mm)
Auto duplex printing:
-Top margin: 0.20 inch (5.0 mm)
-Bottom margin: 0.20 inch (5.0 mm)
-Left margin:
Letter/Legal: 0.26 inch (6.4 mm)
Other sizes: 0.14 inch (3.4 mm)
-Right margin:
Letter/Legal: 0.25 inch (6.3 mm)
Other sizes: 0.14 inch (3.4 mm)
Operating environment Temperature: 41 to 95 °F (5 to 35 °C)
191
Humidity: 10 to 90 % RH (no condensation)
* The performance of the printer may be reduced under certain temperature
and humidity conditions.
Recommended conditions:
Temperature: 59 to 86 °F (15 to 30 °C)
Humidity: 10 to 80 % RH (no condensation)
* For the temperature and humidity conditions of papers such as photo paper,
refer to the paper's packaging or the supplied instructions.
Storage environment Temperature: 32 to 104 °F (0 to 40 °C)
Humidity: 5 to 95 % RH (no condensation)
Power supply AC 100-240 V, 50/60 Hz
Power consumption Printing (Copy): Approx. 14 W
Standby (minimum): Approx. 1.0 W *1*2
OFF: Approx. 0.3 W *1
*1 USB connection to PC
*2 The wait time for standby cannot be changed.
External dimensions Approx. 14.7 (W) x 12.8 (D) x 5.6 (H) inches
Approx. 372 (W) x 324 (D) x 140 (H) mm
* With the Paper Support and Paper Output Tray retracted.
Weight Approx. 14.7 lb (Approx. 6.7 kg)
* With the Print Head and ink tanks installed.
Print Head/Ink Total 6656 nozzles (PgBK 1024 nozzles, GY/DyeBK each 1024 nozzles, Y 512
nozzles, C/M each 1536 nozzles)
Copy Specifications
Multiple copy max. 99 pages
Intensity adjustment 9 positions, Auto intensity (AE copy)
Reduction / Enlargement 25 % - 400 % (1 % unit)
Scan Specifications
Scanner driver Windows: TWAIN 1.9 Specification, WIA
Mac OS: ICA
Maximum scanning size A4/Letter, 8.5" x 11.7"/216 x 297 mm
Scanning resolution Optical resolution (horizontal x vertical) max: 2400 x 4800 dpi *1
Interpolated resolution max: 19200 x 19200 dpi *2
*1 Optical Resolution represents the maximum sampling rate based on ISO
14473.
192
*2 Increasing the scanning resolution will limit the maximum possible scanning
area.
Gradation (Input / Output) Gray: 16 bit/8 bit
Color: 48 bit/24 bit (RGB each 16 bit/8 bit)
Network Specifications
Communication protocol TCP/IP
Wired LAN Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)
Transfer speed: 10 M/100 Mbps (auto switching)
Wireless LAN Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b
Frequency bandwidth: 2.4 GHz
Channel: 1-11 or 1-13
* Frequency bandwidth and available channels differ depending on country or
region.
Communication distance: Indoors 164 feet/50 m
* Effective range varies depending on the installation environment and location.
Security:
WEP (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Setup:
WPS (Push button configuration/PIN code method)
WCN (WCN-NET)
Easy wireless connect
Other Features: Administration password
Minimum System Requirements
Conform to the operating system's requirements when higher than those given here.
Windows
Operating System Windows 10, Windows 8.1*, Windows 8
Windows 7 SP1
Windows Vista SP2
* Windows 8.1 includes Windows 8.1 Update.
Hard Disk Space 3.1 GB
Note: For bundled software installation.
The necessary amount of hard disk space may be changed without notice.
193
Display XGA 1024 x 768
Mac OS
Operating System OS X v10.8.5 - OS X v10.11
Hard Disk Space 1.5 GB
Note: For bundled software installation.
The necessary amount of hard disk space may be changed without notice.
Display XGA 1024 x 768
Other Supported OS
Some functions may not be available with each OS. Refer to the Canon web site for details on operation with iOS,
Android, Windows RT, and Windows 10 Mobile.
Mobile Printing Capability
Apple AirPrint
Google Cloud Print
PIXMA Cloud Link
An internet connection is required to use Easy-WebPrint EX and all the Online Manual.
Windows: Operation can only be guaranteed on a PC with pre-installed Windows Vista or later.
Windows: A CD-ROM Drive or internet connection is required during software installation.
Windows: Internet Explorer 8, 9, 10 or 11 is required to install Easy-WebPrint EX.
Windows: Some functions may not be available with Windows Media Center.
Windows: .NET Framework 4.5.2 or 4.6 must be installed to use the Windows software.
Windows: The TWAIN driver (ScanGear) is based on the TWAIN 1.9 Specification and requires the
Data Source Manager bundled with the operating system.
Mac OS: For Mac OS, an internet connection is required during software installation.
In an in-house network environment, the 5222 port must be open. Contact the network
administrator for details.
Information in this guide is subject to change without notice.
194
Information about Paper
Supported Media Types
Paper Load Limit
Unsupported Media Types
Handling Paper
Before Printing on Art Paper
Print Area
195
Supported Media Types
For best results, choose paper designed for how you are printing. A variety of paper for documents as well
as photos or illustrations is available from Canon. Use genuine Canon paper to print important photos, when
possible.
Media Types
Genuine Canon paper
Note
For warnings on use of the non-printable side, see each product's usage information.
For details on page sizes and media types, access the Canon website.
Genuine Canon paper is not available in some countries or regions. Note that in the United States,
Canon paper is not sold by model number. Instead, purchase paper by name.
Paper for printing documents:
Canon Red Label Superior <WOP111>
Canon Océ Office Colour Paper <SAT213>
High Resolution Paper <HR-101N>*1
Paper for printing photos:
Photo Paper Pro Platinum <PT-101>
Glossy Photo Paper "Everyday Use" <GP-501>
Photo Paper Glossy <GP-701>
Photo Paper Plus Glossy II <PP-201>
Photo Paper Plus Glossy II <PP-301>
Photo Paper Pro Luster <LU-101>
Photo Paper Plus Semi-gloss <SG-201>
Matte Photo Paper <MP-101>
Paper other than genuine Canon paper
Plain Paper (including recycled paper)
Envelopes*1
T-Shirt Transfers*1
*1 Printing to this paper from the operation panel or from a PictBridge (Wireless LAN) compliant device
is not supported.
Paper Load Limit
Paper Settings on the Printer Driver and the Printer (Media Type) (Windows)
Paper Settings on the Printer Driver and the Printer (Media Type) (Mac OS)
Note
You can print onto a printable disc using the disc tray supplied with the printer.
Placing a Printable Disc
196
When printing photos saved on a PictBridge (Wireless LAN) compliant device, you must specify the
page size and media type.
Printing from Digital Camera
You can use non-Canon genuine art paper. For details, access our website.
You cannot print in the top and bottom 1.38 inch (35 mm) margins of the paper (in the printing
direction).
Sizes for Art Paper
Before Printing on Art Paper
Page Sizes
You can use the following page sizes.
Note
Page sizes and media types the printer supports differ depending on the OS you are using.
Standard sizes:
Letter
Legal
A4
B5
A5
L(89x127mm)
KG/4"x6"(10x15)
2L/5"x7"(13x18)
Hagaki
Hagaki 2
8"x10"(20x25cm)
Card 2.17"x3.58" 55x91mm
Square 5"x5" 127x127mm
Envelope Com 10
Envelope DL
Nagagata 3
Nagagata 4
Yougata 4
Yougata 6
Special sizes
Special page sizes must be within the following limits:
rear tray
- Minimum size: 2.17 x 3.50 inches (55.0 x 89.0 mm)
- Maximum size: 8.50 x 26.61 inches (215.9 x 676.0 mm)
cassette
- Minimum size: 5.83 x 8.27 inches (148.0 x 210.0 mm)
197
- Maximum size: 8.50 x 11.69 inches (215.9 x 297.0 mm)
Paper Weight
You can use paper in the following weight range.
17 to 28 lb (64 to 105 g /m
2
) (plain paper other than genuine Canon paper)
198
Paper Load Limit
Genuine Canon Paper
Paper for printing documents:
Media Name <Model No.> Rear Tray Cassette
Paper Output
Tray
Canon Red Label Superior <WOP111> Approx. 100 sheets Approx. 100 sheets Approx. 50
sheets
Canon Océ Office Colour Paper <SAT213> Approx. 80 sheets Approx. 80 sheets Approx. 50
sheets
High Resolution Paper <HR-101N>*1 Approx. 80 sheets N/A Approx. 50
sheets
Paper for printing photos:
Media Name <Model No.> Rear Tray
Pa-
per
Out-
put
Tray
Photo Paper Pro Platinum <PT-101>*2 10 sheets: A4, Letter, and 8" x 10" (20 x 25 cm)
20 sheets: 4" x 6" (10 x 15 cm)
*3
Glossy Photo Paper "Everyday Use" <GP-501>*2 A4, Letter: 10 sheets
4" x 6" (10 x 15 cm): 20 sheets
*3
Photo Paper Glossy <GP-701>*2 A4, Letter: 10 sheets
4" x 6" (10 x 15 cm): 20 sheets
*3
Photo Paper Plus Glossy II <PP-201>*2 A4, Letter, 5" x 7" (13 x 18 cm), 8" x 10" (20 x 25
cm): 10 sheets
4" x 6" (10 x 15 cm), Square 5" x 5" (127 x 127
mm): 20 sheets
*3
Photo Paper Plus Glossy II <PP-301>*2 A4, Letter, 5" x 7" (13 x 18 cm), 8" x 10" (20 x 25
cm): 10 sheets
4" x 6" (10 x 15 cm), Square 5" x 5" (127 x 127
mm): 20 sheets
*3
Photo Paper Pro Luster <LU-101>*2 A4, Letter: 10 sheets *3
Photo Paper Plus Semi-gloss <SG-201>*2 A4, Letter, 5" x 7" (13 x 18 cm), 8" x 10" (20 x 25
cm): 10 sheets
4" x 6" (10 x 15 cm): 20 sheets
*3
Matte Photo Paper <MP-101> A4, Letter: 10 sheets
4" x 6" (10 x 15 cm): 20 sheets
*3
199
Paper other than Genuine Canon Paper
Common Name Rear Tray Cassette
Paper Output
Tray
Plain Paper (including recycled paper)*1 Approx. 100 sheets (10
sheets: Legal)
Approx. 100 sheets Approx. 50
sheets (10
sheets: Legal)
Envelopes 10 envelopes N/A *3
T-Shirt Transfers 1 sheet : A4 N/A *3
*1 Normal feeding at maximum capacity may not be possible with some types of paper, or under very high
or low temperature or humidity. In this case, load half the amount of paper or less.
*2 Feeding from a loaded stack of paper may leave marks on the printed side or prevent efficient feeding.
In this case, load one sheet at a time.
*3 For best results in continuous printing, remove printed paper or envelopes from the paper output tray to
avoid smearing or discoloration.
200
Unsupported Media Types
Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also
the printer to jam or malfunction.
Folded, curled, or wrinkled paper
Damp paper
Paper that is too thin (weighing less than 17 lb (64 g /m
2
))
Paper that is too thick (plain paper weighing more than 28 lb (105 g /m
2
), except for Canon genuine
paper)
Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing
on paper smaller than A5)
Picture postcards
Postcards
Envelopes with a double flap
Envelopes with an embossed or treated surface
Envelopes whose gummed flaps are already moistened and adhesive
Any type of paper with holes
Paper that is not rectangular
Paper bound with staples or glue
Paper with an adhesive surface on the back such as label seal
Paper decorated with glitter, etc.
201
Handling Paper
Be careful not to rub or scratch the surfaces of any types of paper when handling.
Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print
quality may be degraded if the printing surface is smudged with sweat or oil that comes from your
hands.
Do not touch the printed surface until the ink is dried. Even when the ink is dried, be careful not to touch
the printed surface as much as possible when handling. Due to the nature of the pigment ink, the ink on
the printed surface may be removed when being rubbed or scratched.
Take out only the necessary number of paper from the package, just before printing.
To avoid curling, when you do not print, put unused paper back into the package and keep it on a level
surface. And also, store it avoiding heat, humidity, and direct sunlight.
202
Printing from Computer
Printing from Application Software (Windows Printer Driver)
Printing from Application Software (Mac OS Printer Driver)
Printing Using Canon Application Software
Printing Using a Web Service
Printing from an AirPrint-enabled Printer with Mac
Printing from a Device Equipped with Windows 10 Mobile
203
Printing from Application Software (Windows Printer Driver)
Basic Printing Setup Basic
Various Printing Methods
Changing the Print Quality and Correcting Image Data
Overview of the Printer Driver
Printer Driver Description
Updating the MP Drivers
204
Basic Printing Setup
This section describes settings on the Quick Setup tab used for basic printing.
Basic Printing Setup
1. Check that printer power is on
2.
Load paper in printer
3.
Open printer driver's setup screen
4.
Select frequently used settings
On the Quick Setup tab, use Commonly Used Settings to select from predefined print settings.
When you select a print setting, the settings for Additional Features, Media Type, and Printer Paper
Size automatically switch to the predefined values.
5.
Select print quality
For Print Quality, select from High, Standard, or Draft.
205
Important
The print quality selections will differ depending on which print setting you select.
6.
Select paper source
For Paper Source, select Automatically Select, Rear Tray, or Cassette, whichever matches your
purpose.
Important
The paper source settings that can be selected may differ depending on the paper type and
size.
206
7. Click OK
The printer will now print using these settings.
Important
When you select Always Print with Current Settings, the settings on the Quick Setup, Main, and
Page Setup tabs are saved, and those settings are used in subsequent printings.
To register the current settings as a new preset, click Save... under Commonly Used Settings.
Note
If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
To check the current printer settings or to apply the printer settings to the printer driver, display the
Quick Setup tab, click Printer Media Information..., and specify the settings in the dialog box that
appears.
For details about the paper information to be registered on the printer, see the following:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
Checking Printer Settings and Applying Settings to Printer Driver
1. Open printer driver setup window
2. On Quick Setup tab, click Printer Media Information...
The Printer Media Information dialog box appears.
3. Select Paper Source
207
From Paper Source, check the setting or select a new paper source.
The current printer settings appear in Media Type and Page Size.
4.
Apply settings
To apply the printer settings to the printer driver, click Set.
Note
If the media type on the printer is set to Hagaki, Ink Jet Hagaki, or Hagaki K, or if the output
paper size on the printer is set to 2L/5"x7"(13x18), click Set to display the dialog box.
Select the media type and paper size that match your purpose, and then click OK.
If the media type and the output paper size are not set on the printer, Set will be grayed out and
cannot be clicked.
If communication with the printer is disabled, the Printer Media Information... dialog box will
not appear or the printer driver will not be able to obtain printer media information.
208
Paper Settings on the Printer Driver and the Printer (Media Type)
When you use this printer, selecting a media type and paper size that matches the print purpose will help
you achieve the best print results.
You can use the following media types on this printer.
Canon genuine papers (Document Printing)
Media name <Model No.>
Media Type in the printer
driver
Paper information registered on
the printer
Canon Red Label Superior <WOP111> Plain Paper Plain paper
Canon Océ Office Colour Paper <SAT213> Plain Paper Plain paper
Canon genuine papers (Photo Printing)
Media name <Model No.> Media Type in the printer driver
Paper information registered
on the printer
Photo Paper Plus Glossy II <PP-201/PP-301> Photo Paper Plus Glossy II Plus Glossy II
Photo Paper Pro Platinum <PT-101> Photo Paper Pro Platinum Pro Platinum
Photo Paper Pro Luster <LU-101> Photo Paper Pro Luster Pro Luster
Photo Paper Plus Semi-gloss <SG-201> Photo Paper Plus Semi-gloss Plus Semi-gloss
Glossy Photo Paper "Everyday Use" <GP-501> Glossy Photo Paper Glossy
Photo Paper Glossy <GP-701> Glossy Photo Paper Glossy
Matte Photo Paper <MP-101> Matte Photo Paper Matte
Canon genuine papers (Business Letter Printing)
Media name <Model No.> Media Type in the printer driver
Paper information registered on the
printer
High Resolution Paper <HR-101N> High Resolution Paper High-Res Paper
Commercially available papers
Media name Media Type in the printer driver
Paper information registered on the
printer
Plain Paper (including recycled paper) Plain Paper Plain paper
Envelopes Envelope Envelope
Other Photo Paper Other Photo Paper Other Photo Paper
T-Shirt Transfers T-Shirt Transfers Others
209
Paper Settings on the Printer Driver and the Printer (Paper Size)
When you use this printer, selecting a paper size that matches the print purpose will help you achieve the
best print results.
You can use the following paper sizes on this printer.
Printer Paper Size in the printer driver Paper information registered on the printer
Letter 8.5"x11" 22x28cm Letter
Letter (Art Paper Margin 35) Letter
Legal 8.5"x14" 22x36cm Legal
A5 A5
A4 A4
Art A4 (Margin 35) A4
B5 B5
4"x6" 10x15cm KG/4"x6"(10x15)
5"x7" 13x18cm 2L/5"x7"(13x18)
8"x10" 20x25cm 8"x10"(20x25cm)
L 89x127mm L(89x127mm)
2L 127x178mm 2L/5"x7"(13x18)
Square 5"x5" 13x13cm Square 5"x5"
Envelope Com 10 Envelope Com 10
Envelope DL Envelope DL
Yougata 4 4.13"x9.25" Yougata 4
Yougata 6 3.86"x7.48" Yougata 6
Card 2.17"x3.58" 55x91mm Card 2.17"x3.58"
Custom Size Others
210
Various Printing Methods
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Execute Borderless Printing
Scaled Printing
Page Layout Printing
Tiling/Poster Printing
Duplex Printing
Setting Up Envelope Printing
Printing on Postcards
Setting Paper Dimensions (Custom Size)
211
Setting a Page Size and Orientation
The paper size and orientation are essentially determined by the application software. When the page size
and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the
application software, you do not need to select them on the Page Setup tab.
When you are not able to specify them with the application software, the procedure for selecting a page size
and orientation is as follows:
You can also set page size and orientation on the Quick Setup tab.
1.
Open the printer driver setup window
2.
Select the paper size
Select a page size from the Page Size list on the Page Setup tab.
3.
Set Orientation
Select Portrait or Landscape for Orientation. Check Rotate 180 degrees check box when you want to
perform printing with the original being rotated 180 degrees.
4. Click OK
When you execute print, the document will be printed with the selected page size and the orientation.
Note
If Normal-size is selected for Page Layout, then Automatically reduce large document that the
printer cannot output is displayed.
Normally, you can leave the check box checked. During printing, if you do not want to reduce large
documents that cannot be printed on the printer, uncheck the check box.
212
Setting the Number of Copies and Printing Order
The procedure for specifying the number of copies and printing order is as follows:
You can also set the number of copies on the Quick Setup tab.
1. Open the printer driver setup window
2.
Specify the number of copies to be printed
For Copies on the Page Setup tab, specify the number of copies to be printed.
3.
Specify the print order
Check the Print from Last Page check box when you want to print from the last page in order, and
uncheck the check box when you want to print from the first page.
Check the Collate check box when you are printing multiple copies of a document and want to print out
all pages in each copy together. Uncheck this check box when you want to print all pages with the same
page number together.
Print from Last Page: /Collate:
Print from Last Page: /Collate:
213
Print from Last Page: /Collate:
Print from Last Page: /Collate:
4.
Click OK
When you execute print, the specified number of copies will be printed with the specified printing order.
Important
When the application software that you used to create the document has the same function, specify the
settings on the printer driver. However, if the print results are not acceptable, specify the function
settings on the application software. When you specify the number of copies and the printing order with
both the application software and this printer driver, the number of copies may be multiplied numbers of
the two settings or the specified printing order may not be enabled.
Print from Last Page appears grayed out and is unavailable when Tiling/Poster is selected for Page
Layout.
When Booklet is selected for Page Layout, Print from Last Page and Collate appear grayed out and
cannot be set.
When Duplex Printing is selected, Print from Last Page appears grayed out and cannot be set.
Note
By setting both Print from Last Page and Collate, you can perform printing so that papers are collated
one by one starting from the last page.
These settings can be used in combination with Normal-size, Borderless, Fit-to-Page, Scaled, and
Page Layout.
214
Execute Borderless Printing
The borderless printing function allows you to print data without any margin by enlarging the data so that it
extends slightly off the paper. In standard printing, margins are created around the document area. However,
in borderless printing function, these margins are not created. When you want to print data such as a photo
without providing any margin around it, set borderless printing.
The procedure for performing borderless printing is as follows:
You can also set borderless printing in Additional Features on the Quick Setup tab.
Setting Borderless Printing
1.
Open the printer driver setup window
2.
Set borderless printing
Select Borderless from the Page Layout list on the Page Setup tab.
Click OK when the confirmation message appears.
When a message prompting you to change the media type appears, select a media type from the list
and click OK.
215
3. Check the paper size
Check the Page Size list. When you want to change it, select another page size from the list. The list
displays only sizes that can be used for borderless printing.
4. Adjust the amount of extension from the paper
If necessary, adjust the amount of extension using the Amount of Extension slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to
the left decreases the amount.
It is recommended to set the slider at the second position from the right for most cases.
Important
When the Amount of Extension slider is set to the rightmost position, the back side of the
paper may become smudged.
5.
Click OK
When you execute print, the data is printed without any margins on the paper.
Important
When a page size that cannot be used for borderless printing is selected, the size is automatically
changed to the valid page sizes for borderless printing.
When Borderless is selected, the Printer Paper Size, Duplex Printing, Stapling Side settings, and
the Stamp/Background... (Stamp...) button on the Page Setup tab appear grayed out and are
unavailable.
When Other Fine Art Paper, Envelope, High Resolution Paper, or T-Shirt Transfers is selected
from the Media Type list on the Main tab, you cannot perform borderless printing.
Depending on the type of the media used during borderless printing, the print quality may deteriorate
at the top and bottom of the sheet or stains may form.
When the ratio of the height to the width differs from the image data, a portion of the image may not
be printed depending on the size of the media used.
In this case, crop the image data with an application software according to the paper size.
Note
When Plain Paper is selected for Media Type on the Main tab, borderless printing is not
recommended. Therefore, the message for media selection appears.
When you are using plain paper for test printing, select Plain Paper, and click OK.
Expanding the Range of the Document to Print
Setting a large amount of extension allows you to perform borderless printing with no problems. However,
the portion of the document extending off the paper range will not be printed and for this reason, the
subjects around the perimeter of a photo may not be printed.
216
When you are not satisfied with the result of borderless printing, reduce the amount of extension. The
extension amount decreases as the Amount of Extension slider is moved to the left.
Important
When the amount of extension is decreased, an unexpected margin may be produced on the print,
depending on the size of the paper.
Note
When the Amount of Extension slider is set to the leftmost position, image data will be printed in the
full size. If you set this when printing the address side of a postcard, the postal code of the sender is
printed in the correct position.
When Preview before printing is checked on the Main tab, you can confirm whether there will be no
margin before printing.
217
Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printing
Select Scaled from the Page Layout list on the Page Setup tab.
3. Select the paper size of the document
Using Page Size, select the page size that is set with your application software.
4. Set the scaling rate by using one of the following methods:
Select a Printer Paper Size
When the printer paper size is smaller than the Page Size, the page image will be reduced. When
the printer paper size is larger than the Page Size, the page image will be enlarged.
218
Specify a scaling factor
Directly type in a value into the Scaling box.
The current settings are displayed in the settings preview on the left side of the printer driver.
5. Click OK
When you execute print, the document will be printed with the specified scale.
Important
When the application software which you used to create the original has the scaled printing function,
configure the settings on your application software. You do not need to configure the same setting in the
printer driver.
219
Note
Selecting Scaled changes the printable area of the document.
220
Page Layout Printing
The page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the printer driver setup window
2.
Set page layout printing
Select Page Layout from the Page Layout list on the Page Setup tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3. Select the print paper size
Select the size of the paper loaded in the printer from the Printer Paper Size list.
4. Set the number of pages to be printed on one sheet and the page order
If necessary, click Specify..., specify the following settings in the Page Layout Printing dialog box, and
click OK.
221
Page Layout
To change the number of pages to be printed on a single sheet of paper, select the number of pages
from the list.
Page Order
To change the page arrangement order, select a placement method from the list.
Page Border
To print a page border around each document page, check this check box.
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the
specified order.
222
Tiling/Poster Printing
The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. You can also paste the pages together to create a large print like
a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the printer driver setup window
2.
Set tiling/poster printing
Select Tiling/Poster from the Page Layout list on the Page Setup tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3. Select the print paper size
Select the size of the paper loaded in the printer from the Printer Paper Size list.
223
4. Set the number of image divisions and the pages to be printed
If necessary, click Specify..., specify the following settings in the Tiling/Poster Printing dialog box,
and then click OK.
Image Divisions
Select the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create
a larger poster.
Print "Cut/Paste" in margins
To leave out words "Cut" and "Paste", uncheck this check box.
Note
This feature may be unavailable when certain printer drivers or operating environments are
used.
Print "Cut/Paste" lines in margins
To leave out cut lines, uncheck this check box.
Print page range
Specifies the printing range. Select All under normal circumstances.
To reprint only a specific page, select Pages and enter the page number you want to print. To
specify multiple pages, enter the page numbers by separating them with commas or by entering a
hyphen between the page numbers.
Note
You can also specify the print range by clicking the pages in the settings preview.
5. Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document will be divided into several pages during printing.
Printing Only Specific Pages
If ink becomes faint or runs out during printing, you can reprint only the specific pages by following the
procedure below:
1. Set the print range
224
In the settings preview on the left of the Page Setup tab, click the pages that do not need to be
printed.
The pages that were clicked are deleted, and only the pages to be printed are displayed.
Note
Click the deleted pages to display them again.
Right-click the settings preview to select Print all pages or Delete all pages.
2.
Complete the setup
After completing the page selection, click OK.
When you execute print, only specified pages will be printed.
Important
Since tiling/poster printing enlarges the document when printing it, the print results may become coarse.
225
Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in Additional Features on the Quick Setup tab.
Performing Automatic Duplex Printing
You can perform the duplex printing without having to turn over the paper.
1.
Open the printer driver setup window
2.
Set automatic duplex printing
Check the Duplex Printing check box on the Page Setup tab and confirm that Automatic is checked.
3. Select the layout
Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.
4. Set the print area
226
When you perform duplex printing, the print area of the document becomes slightly narrower than
usual and the document may not fit on one page.
Click Print Area Setup..., select one of the following process methods, and then click OK.
Use normal-size printing
Print without reducing the page.
Use reduced printing
Reduce the page slightly during printing.
5.
Specify the side to be stapled
The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To
change the setting, select another stapling side from the list.
6.
Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
7.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, duplex printing will be started.
Performing Duplex Printing Manually
You can perform the duplex printing manually.
1.
Open the printer driver setup window
2.
Set duplex printing
Check the Duplex Printing check box and uncheck the Automatic check box on the Page Setup tab.
227
3.
Select the layout
Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.
4.
Specify the side to be stapled
The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To
change the setting, select another stapling side from the list.
5.
Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
6.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document is first printed on one side of a sheet of paper. After one side is
printed, reload the paper correctly according to the message.
Then click Start Printing to print the opposite side.
Important
When a media type other than Plain Paper, Ink Jet Hagaki (A), Hagaki K (A), Hagaki (A), or Hagaki
is selected from the Media Type list on the Main tab, Duplex Printing appears grayed out and is
unavailable.
When Borderless, Tiling/Poster, or Booklet is selected from the Page Layout list, Duplex Printing
and Stapling Side appear grayed out and are unavailable.
Duplex Printing can be performed only when one of the following paper sizes is selected from Page
Size on the Page Setup tab.
Letter 8.5"x11" 22x28cm, A5, A4, B5, Hagaki 100x148mm
228
After printing the front page, there is an ink drying wait time before starting to print the back page
(Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying
wait time at Custom Settings on the Maintenance tab.
When you use the automatic duplex printing function to print a postcard, print the address side first and
then print the message side.
Related Topic
Changing the Printer Operation Mode
229
Setting Up Envelope Printing
The procedure for performing envelope printing is as follows:
1. Load envelope on the printer
2. Open the printer driver setup window
3.
Select the media type
Select Envelope from Commonly Used Settings on the Quick Setup tab.
4.
Select the paper size
When the Envelope Size Setting dialog box is displayed, select Envelope Com 10, Envelope DL,
Yougata 4 4.13"x9.25", or Yougata 6 3.86"x7.48", and then click OK.
5. Set the orientation
To print the addressee horizontally, select Landscape for Orientation.
Note
If Yougata 4 4.13"x9.25", Yougata 6 3.86"x7.48", Envelope Com 10, or Envelope DL is
selected for Printer Paper Size, the printer rotates the paper 90 degrees to the left to print,
regardless of the Rotate 90 degrees left when orientation is [Landscape] setting for Custom
Settings on the Maintenance tab.
230
6. Select the print quality
Select High or Standard that matches your purpose for Print Quality.
7. Click OK
When you execute print, the information is printed on the envelope.
Important
When you execute envelope printing, guide messages are displayed.
To hide the guide messages, check the Do not show this message again check box.
To show the guide again, click the View Printer Status button on the Maintenance tab, and start the
Canon IJ Status Monitor.
Then click Envelope Printing from Display Guide Message of the Option menu to enable the setting.
Note
If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
To check the current printer settings or to apply the printer settings to the printer driver, click Printer
Media Information... from the Quick Setup tab, and specify the settings in the dialog box that appears.
For details about the paper information to be registered on the printer, see the following:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
231
Printing on Postcards
This section describes the procedure for postcard printing.
1. Load postcard on the printer
2. Open the printer driver setup window
3.
Select commonly used settings
Display the Quick Setup tab, and for Commonly Used Settings, select Standard.
4.
Select the media type
For Media Type, select Ink Jet Hagaki (A), Ink Jet Hagaki, Hagaki K (A), Hagaki K, Hagaki (A), or
Hagaki.
Important
This printer cannot print on postcards that have photos or stickers attached.
When you use the automatic duplex printing function to print a postcard, print the address side
first and then print the message side.
When printing on each side of a postcard separately, you will get cleaner printing if you print the
message side first and then print the address side.
The paper settings on the printer driver are different, depending on whether you are printing on
the address side or the message side.
To check the current printer settings or to apply the printer settings to the printer driver, click
Printer Media Information... from the Quick Setup tab, and specify the settings in the dialog box
that appears.
For details about the paper information to be registered to the printer driver and on the printer, see
the following:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
When you use the automatic duplex printing function, register the paper information for the side to
be printed first.
5. Select the paper size
For Printer Paper Size, select Hagaki 100x148mm or Hagaki 2 200x148mm.
Important
Return postcards can be used only when you print them from the computer.
When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from your
application software or the printer driver.
Do not fold the return postcard. If a crease is formed, the printer will not be able to feed the
postcard properly, and this condition will cause line shifts or a paper jam.
With return postcards, automatic duplex printing and borderless printing cannot be used.
6. Set the print orientation
232
To print the address horizontally, set Orientation to Landscape.
7. Select the print quality
For Print Quality, select High or Standard, according to your purpose.
8. Click OK
When you execute printing, the data will be printed onto the postcard.
Important
When you execute postcard printing, a guide message is displayed.
When the guide message is displayed, select Do not show this message again if you do not want any
guide messages to be displayed.
To display guide messages again, open the Maintenance tab and click View Printer Status to start the
Canon IJ Status Monitor.
On the Option menu, choose Display Guide Message and click Hagaki Printing to enable the setting.
When printing on media other than postcards, load the media according to usage method of that media,
and click Start Printing.
233
Setting the Print Quality Level (Custom)
The print quality level can be set in the Custom.
The procedure for setting the print quality level is as follows:
1. Open the printer driver setup window
2.
Select the print quality
On the Main tab, select Custom for Print Quality, and click Set....
The Custom dialog box opens.
3. Setting the print quality level
Drag the slider bar to select the print quality level and click OK.
4. Complete the setup
Click OK on the Main tab.
When you execute print, the image data is printed with the selected print quality level.
Important
Certain print quality levels cannot be selected depending on the settings of Media Type.
234
Related Topics
Specifying Color Correction
Adjusting Color Balance
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
235
Overview of the Printer Driver
Canon IJ Printer Driver
Opening Printer Driver's Setup Screen
Canon IJ Status Monitor
Checking the Ink Status from Your Computer
Canon IJ Preview
Deleting the Undesired Print Job
Instructions for Use (Printer Driver)
236
Canon IJ Printer Driver
The Canon IJ printer driver (simply called printer driver below) is software that you install onto your
computer so that it can communicate with the printer.
The printer driver converts the print data created by your application software into data that your printer can
understand, and sends the converted data to the printer.
Because different printers support different data formats, you need a printer driver that supports your printer.
Printer Driver Types
If your computer is running Windows Vista SP1 or a later version, you can install the XPS printer driver in
addition to the normal printer driver.
The XPS printer driver is suited to printing from application software that supports XPS printing.
Important
Note that if you want to use the XPS printer driver, the normal printer driver must also be installed.
Installing the Printer Driver
To install the normal printer driver, install the driver from Start Setup Again on the setup CD-ROM
that came with your printer.
To install the XPS printer driver, load the setup CD-ROM that comes with the printer, and then select
XPS Driver from Add Software.
Specifying the Printer Driver
To specify the printer driver, open the Print dialog box of the application software you are using, and
select "Canon XXX" (where "XXX" is your model name) to specify the regular printer driver or select
"Canon XXX XPS" (where "XXX" is your model name) to specify the XPS printer driver.
Displaying the Manual from the Printer Driver
To display the description of a setup tab from the printer driver's setup screen, click Help on that tab.
Related Topic
Opening Printer Driver's Setup Screen
237
Opening Printer Driver's Setup Screen
You can display the printer driver's setup screen from your application software or by clicking the printer
icon.
Displaying the Printer Driver's Setup Screen from Your Application
Software
Perform this procedure to set up the print settings during printing.
1.
Select print command from application software
The Print command can generally be found in the File menu.
2.
Select your printer model, and click Preferences (or Properties)
The printer driver's setup screen appears.
Note
Depending on the application software you are using, the command and menu names, and the
number of steps may vary. For details, refer to the operating instructions of your application
software.
Displaying the Printer Driver's Setup Screen by Clicking the Printer Icon
From the setup screen you can perform printer maintenance operations such as print head cleaning, or
set print settings to be shared by all application software.
1.
To open the setup screen:
If you are using Windows 10, Windows 8.1, or Windows 8, select Control Panel -> Hardware
and Sound -> Devices and Printers.
If you are using Windows 7, from the Start menu, select Devices and Printers.
If you are using Windows Vista, select the Control Panel -> Hardware and Sound -> Printers.
2. Right-click the icon of your model. When the menu appears, select Printing preferences
The printer driver's setup screen appears.
Important
Opening the printer driver setup window through Printer properties (Windows 10, Windows
8.1, Windows 8, Windows 7) or Properties (Windows Vista) displays such tabs regarding the
Windows functions as the Ports (or Advanced) tab. Those tabs do not appear when opening
through Printing preferences or application software. For tabs regarding Windows functions,
refer to the user's manual for the Windows.
238
Checking the Ink Status from Your Computer
You can check the remaining ink level and the ink tank types for your model.
1. Open the printer driver setup window
2. Launching the Canon IJ Status Monitor
On the Maintenance tab, click View Printer Status.
The Canon IJ Status Monitor opens and displays an image of the ink status.
3.
Display Estimated ink levels
For Estimated ink levels, click (the disclosure triangle) to display an image representation of the ink
status.
239
Instructions for Use (Printer Driver)
This printer driver is subject to the following restrictions. Keep the following points in mind when using the
printer driver.
Restrictions on the Printer Driver
Depending on the document type to be printed, the paper feed method specified in the printer driver
may not operate correctly.
If this happens, open the printer driver setup window from the Print dialog box of the application
software, and check the setting in the Paper Source field on the Main tab.
With some applications, the Copies setting in the Page Setup tab of the printer driver may not be
enabled.
In this case, use the copies setting in the Print dialog box of the application software.
If the selected Language in the About dialog box of the Maintenance tab does not match the
operating system interface language, the printer driver setup window may not be displayed properly.
Do not change the Advanced tab items of the printer properties. If you change any of the items, you
will not be able to use the following functions correctly.
Also, if Print to file is selected in the Print dialog box of the application software and with applications
that prohibit EMF spooling, such as Adobe Photoshop LE and MS Photo Editor, the following
functions will not operate.
Preview before printing on the Main tab
Prevention of Print Data Loss in the Print Options dialog box on the Page Setup tab
Page Layout, Tiling/Poster, Booklet, Duplex Printing, Specify Margin..., Print from Last
Page, Collate, and Stamp/Background... (Stamp...) on the Page Setup tab
Print a pattern for color adjustment on the Color Adjustment tab in the Manual Color
Adjustment dialog box
Since the resolution in the preview display differs from the printing resolution, text and lines in the
preview display may appear different from the actual print result.
With some applications, the printing is divided into multiple print jobs.
To cancel printing, delete all divided print jobs.
If image data is not printed correctly, display the Print Options dialog box from the Page Setup tab
and change the setting of Disable ICM required from the application software. This may solve the
problem.
Note
Disable ICM required from the application software cannot be used when the XPS printer
driver is used.
The card slot of the printer may become inaccessible. In such cases, restart the printer or turn it off
and reconnect the USB cable.
Points to Note About Applications with Restrictions
There are following restrictions in Microsoft Word (Microsoft Corporation).
When Microsoft Word has the same printing functions as the printer driver, use Word to specify
them.
240
When Fit-to-Page, Scaled, or Page Layout is used for Page Layout on the Page Setup tab of
the printer driver, the document may not print normally in certain versions of Word.
When Page Size in Word is set to "XXX Enlarge/Reduce", the document may not print normally in
certain versions of Word.
If this happens, follow the procedure below.
1. Open Word's Print dialog box.
2. Open the printer driver setup window, and on the Page Setup tab, set Page Size to the same
paper size that you specified in Word.
3. Set the Page Layout that you want, and then click OK to close the window.
4. Without starting printing, close the Print dialog box.
5. Open Word's Print dialog box again.
6. Open the printer driver setup window and click OK.
7. Start printing.
If bitmap printing is enabled in Adobe Illustrator (Adobe Systems Incorporated), printing may take time
or some data may not be printed. Print after unchecking the Bitmap Printing check box in the Print
dialog box.
241
Printer Driver Description
Quick Setup tab Description
Main tab Description
Page Setup tab Description
Maintenance tab Description
Canon IJ Preview Description
Canon IJ Status Monitor Screen
242
Quick Setup tab Description
The Quick Setup tab is for registering commonly used print settings. When you select a registered setting,
the printer automatically switches to the preset items.
Commonly Used Settings
The names and icons of frequently used printing profiles are registered. When you select a printing
profile according to the purpose of the document, settings that match the purpose are applied.
In addition, functions that are thought to be useful for the selected printing profile are displayed in
Additional Features.
You can also change a printing profile and register it under a new name. You can delete the registered
printing profile.
You can rearrange the profiles either by dragging the individual profiles or by holding down the Ctrl key
and pressing the up or down arrow keys.
Standard
These are the factory settings.
If Page Size, Orientation, and Copies were set from the application software, those settings have
priority.
Photo Printing
If you select this setting when printing a photo, the photo paper and photo size generally used are
set. The Borderless Printing check box is checked automatically.
If Orientation and Copies were set from the application software, those settings have priority.
Business Document
Select this setting when printing a general document.
If Page Size, Orientation, and Copies were set from the application software, those settings have
priority.
Paper Saving
Select this setting to save paper when printing a general document. The 2-on-1 Printing and
Duplex Printing check boxes are checked automatically.
243
If Page Size, Orientation, and Copies were set from the application software, those settings have
priority.
Envelope
If you select this setting for printing an envelope, Media Type is set automatically to Envelope. In
the Envelope Size Setting dialog box, select the size of the envelope to be used.
Note
The combination of the Additional Features that was displayed for the printing profile that had
been selected when the added printing profile was saved is also displayed when that added
printing profile is selected.
Save...
Displays the Save Commonly Used Settings dialog box.
Click this button when you want to save the information that you set on the Quick Setup, Main, and
Page Setup tabs to Commonly Used Settings.
Delete
Deletes a registered printing profile.
Select the name of the setting to be deleted from Commonly Used Settings, and click Delete. When a
confirmation message is displayed, click OK to delete the specified printing profile.
Note
Printing profiles that are registered in the initial settings cannot be deleted.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
Preview before printing
Shows what the print result will look like before you actually print the data.
Check this check box to display a preview before printing.
Uncheck this check box if you do not want to display a preview.
Important
To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4.5.2 or later
installed on your computer.
Additional Features
Displays the frequently used, convenient functions for the printing profile that you selected for
Commonly Used Settings on the Quick Setup tab.
When you move the mouse pointer near a function that can be changed, a description of that function is
displayed.
To enable a function, check the corresponding check box.
For some functions, you can set detailed settings from the Main and Page Setup tabs.
Important
Depending on the printing profiles, certain function may be grayed out and you will not be able to
change them.
244
2-on-1 Printing
Prints two pages of the document, side by side, on one sheet of paper.
To change the page sequence, click the Page Setup tab, select Page Layout for Page Layout,
and click Specify.... Then in the Page Layout Printing dialog box that appears, specify the Page
Order.
4-on-1 Printing
Prints four pages of the document, side by side, on one sheet of paper.
To change the page sequence, click the Page Setup tab, select Page Layout for Page Layout,
and click Specify.... Then in the Page Layout Printing dialog box that appears, specify the Page
Order.
Duplex Printing
Selects whether to print the document on both sides or one side of a sheet of paper.
To change the staple side or the margins, set the new values from the Page Setup tab.
Borderless Printing
Performs borderless printing without any margins on the paper.
With the borderless printing function, the document to be printed is enlarged, so that it extends
slightly off the paper. In other words, the document is printed without any margin.
To adjust the amount that the document extends beyond the paper, click the Page Setup tab,
choose Borderless, and enter the value in Amount of Extension.
Grayscale Printing
This function converts the data to monochrome data when printing your document.
Draft
This setting is appropriate for test printing.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application
software will be reversed vertically and horizontally.
Color/Intensity Manual Adjustment
Select when you set the Color Correction method and individual settings such as Cyan, Magenta,
Yellow, Tone, Brightness, Intensity, and Contrast, etc.
Media Type
Selects a type of printing paper.
Select a media type that matches the paper that is loaded in the printer. This ensures that printing is
carried out properly for the specified paper.
Printer Paper Size
Selects the size of paper actually loaded into the printer.
Normally, the paper size is set automatically according to the output paper size setting, and the
document is printed with no scaling.
When you set 2-on-1 Printing or 4-on-1 Printing in Additional Features, you can manually set the
paper size with Page Size on the Page Setup tab.
If you select a paper size that is smaller than the Page Size, the document size will be reduced. If you
select a paper size that is larger, the document size will be enlarged.
Also if you select Custom..., the Custom Paper Size dialog box opens and allows you to specify any
vertical and horizontal dimensions for the paper size.
245
Orientation
Selects the printing orientation.
If the application used to create your document has a similar function, select the same orientation that
you selected in that application.
Portrait
Prints the document so that its top and bottom positions are unchanged relative to the paper feed
direction. This is the default setting.
Landscape
Prints the document by rotating it 90 degrees relative to the paper feed direction.
You can change the rotation direction by going to the Maintenance tab, opening the Custom
Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape]
check box.
To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left
when orientation is [Landscape] check box.
Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. The
Set... becomes enabled. Click Set... to open the Custom dialog box, and then specify the desired
settings.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Draft
This setting is appropriate for test printing.
Paper Source
Select the source from which paper is supplied.
Automatically Select
Based on the paper settings in the printer driver and the paper information registered on the printer,
the printer automatically determines the paper source and feeds paper.
Rear Tray
Paper is always supplied from the rear tray.
Cassette
Paper is always supplied from the cassette.
Important
Depending on the media type and size, the Paper Source settings that can be selected may differ.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
Important
When the application software that you used to create the document has the same function,
specify the settings on the printer driver. However, if the print results are not acceptable, specify the
function settings on the application software.
246
Always Print with Current Settings
Prints documents with the current settings starting from the next print execution.
When you select this function and then close the printer driver setup window, the information that you
set on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings is
possible starting from the next print execution.
Important
If you log on with a different user name, the settings that were set when this function was enabled
are not reflected in the print settings.
If a setting was specified on the application software, it has priority.
Printer Media Information...
Displays Printer Media Information dialog box.
You can check the printer settings and apply the checked settings to the printer driver.
Defaults
Restores all the settings you have changed to their default values.
Click this button to return all settings on the Quick Setup, Main, and Page Setup tabs to their default
values (factory settings).
Save Commonly Used Settings dialog box
This dialog box allows you to save the information that you set on the Quick Setup, Main, and Page
Setup tabs and add the information to the Commonly Used Settings list on the Quick Setup tab.
Name
Enter the name for the printing profile you wish to save.
Up to 255 characters can be entered.
The name appears, with its associated icon, in the Commonly Used Settings list on the Quick
Setup tab.
Options...
Opens the Save Commonly Used Settings dialog box.
Changes the details of printing profile to be saved.
Save Commonly Used Settings dialog box
Select the icons of the printing profiles to be registered to Commonly Used Settings, and change the
items to be saved in the printing profiles.
Icon
Select the icon for the printing profile you wish to save.
The selected icon appears, with its name, in the Commonly Used Settings list on the Quick
Setup tab.
Save the paper size setting
Saves the paper size to the printing profile in Commonly Used Settings.
To apply the saved paper size when the printing profile is selected, check this check box.
If this check box is unchecked, the paper size is not saved, and consequently the paper size setting
is not applied when the printing profile is selected. Instead the printer prints with the paper size
specified with the application software.
247
Save the orientation setting
Saves the Orientation to the printing profile in Commonly Used Settings.
To apply the saved print orientation when the printing profile is selected, check this check box.
If this check box is unchecked, the print orientation is not saved, and consequently the Orientation
setting is not applied when the printing profile is selected. Instead the printer prints with the print
orientation specified with the application software.
Save the copies setting
Saves the Copies setting to the printing profile in Commonly Used Settings.
To apply the saved copies setting when the printing profile is selected, check this check box.
If this check box is unchecked, the copies setting is not saved, and consequently the Copies
setting is not applied when the printing profile is selected. Instead the printer prints with the copies
setting specified with the application software.
Custom Paper Size dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Units
Select the unit for entering a user-defined paper size.
Paper Size
Specifies the Width and the Height of the custom paper. Measurement is shown according to the
units specified in Units.
Printer Media Information dialog box
This dialog box allows you to check the printer settings and apply the checked settings to the printer
driver.
Paper Source
Check the setting or select a new paper source.
Media Type
Displays the Media Type that is currently set on the printer.
To apply the displayed setting to the printer driver, click Set.
Page Size
Displays the Page Size that is currently set on the printer.
To apply the displayed setting to the printer driver, click Set.
Related Topics
Basic Printing Setup
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Execute Borderless Printing
Duplex Printing
Setting Up Envelope Printing
Printing on Postcards
Switching the Paper Source to Match the Purpose
248
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)
Printing a Color Document in Monochrome
Specifying Color Correction
Adjusting Color Balance
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
Registering a Frequently Used Printing Profile
249
Main tab Description
The Main tab allows you to create a basic print setup in accordance with the media type. Unless special
printing is required, normal printing can be performed just by setting the items on this tab.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
The printer illustration shows how to load paper to match the printer driver settings.
Check whether the printer is set up correctly by looking at the illustration before you start printing.
Media Type
Selects a type of printing paper.
Select a media type that matches the paper that is loaded in the printer. This ensures that printing is
carried out properly for the specified paper.
Paper Source
Shows the source from which paper is supplied.
You may be able to switch the paper source with the printer driver.
Automatically Select
Based on the paper settings in the printer driver and the paper information registered on the printer,
the printer automatically determines the paper source and feeds paper.
Rear Tray
Paper is always supplied from the rear tray.
Cassette
Paper is always supplied from the cassette.
Important
Depending on the media type and size, the Paper Source settings that can be selected may differ.
250
Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
Important
Depending on the Media Type settings, the same print results may be produced even if the Print
Quality is changed.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Draft
This setting is appropriate for test printing.
Custom
Select this when you want to set the printing quality level individually.
Set...
Select Custom for Print Quality to enable this button.
Open the Custom dialog box. You can then individually set the print quality level.
Color/Intensity
Selects color adjustment method.
Auto
Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast, and so on are adjusted
automatically.
Manual
Select when you set the individual settings such as Cyan, Magenta, Yellow, Tone, Brightness,
Intensity, and Contrast, etc. and Color Correction method.
Set...
Select Manual for Color/Intensity to enable this button.
In the Manual Color Adjustment dialog box, you can adjust individual color settings such as
Cyan, Magenta, Yellow, Tone, Brightness, Intensity, and Contrast on the Color Adjustment
tab, and select the Color Correction method on the Matching tab.
Note
If you want to use an ICC profile to adjust colors, use the Manual Color Adjustment dialog
box to set the profile.
Grayscale Printing
This function converts the data to monochrome data when printing your document.
Check this check box to print a color document in monochrome.
Preview before printing
Shows what the print result will look like before you actually print the data.
Check this check box to display a preview before printing.
251
Important
To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4.5.2 or later
installed on your computer.
Defaults
Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on the current screen to their default values (factory
settings).
Custom dialog box
Set the quality level, and select the desired print quality.
Quality
You can use the slider bar to adjust the print quality level.
Important
Certain print quality levels cannot be selected depending on the settings of Media Type.
Note
The High, Standard, or Draft print quality modes are linked with the slider bar. Therefore when
the slider bar is moved, the corresponding quality and value are displayed on the left. This is the
same as when the corresponding radio button is selected for Print Quality on the Main tab.
Color Adjustment Tab
This tab allows you to adjust the color balance by changing the settings of the Cyan, Magenta, Yellow,
Tone, Brightness, Intensity, and Contrast options.
Preview
Shows the effect of color adjustment.
The color and brightness change when each item is adjusted.
Note
The graphic is in monochrome when the Grayscale Printing check box is checked.
View Color Pattern
Displays a pattern for checking color changes produced by color adjustment.
If you want to display the preview image with a color pattern, check this check box.
Cyan / Magenta / Yellow
Adjusts the strengths of Cyan, Magenta, and Yellow.
Moving the slider to the right makes a color stronger, and moving the slider to the left makes a color
weaker.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
This adjustment changes the relative amount of ink of each color used, which alters the total color
balance of the document. Use your application if you want to change the total color balance
significantly. Use the printer driver only if you want to adjust the color balance slightly.
252
Important
When Grayscale Printing is checked on the Main tab, Cyan, Magenta, and Yellow appear
grayed out and are unavailable.
Tone
Sets the color adjustment for monochrome printing.
Moving the slider to the right produces warm colors (Warm), and moving the slider to the left
produces cool colors (Cool).
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Important
This function is not available for certain Media Type settings.
Brightness
Selects the brightness of your print.
You cannot change the levels of pure white and black. However, the brightness of the colors between
white and black can be changed.
Intensity
Adjusts the overall intensity of your print.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the
intensity.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Contrast
Adjusts the contrast between light and dark in the image to be printed.
Moving the slider to the right increases the contrast, moving the slider to the left decreases the
contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Print a pattern for color adjustment
When the color balance or intensity/contrast is changed, the pattern printing function prints a list of
the adjustment results along with the adjustment values.
Select this function when printing a pattern for color adjustment.
Pattern Print preferences...
Check Print a pattern for color adjustment to enable this button.
The Pattern Print dialog box opens and allows you to set pattern printing settings.
Pattern Print dialog box
Performs the setup for printing of patterns that allow you to check the color balance and intensity/
contrast of documents.
Parameters to Adjust
Select the item to be checked by pattern printing.
Cyan/Magenta/Yellow
Prints a pattern that allows you to check the cyan/magenta/yellow balance.
Important
When Grayscale Printing is checked on the Main tab, Cyan/Magenta/Yellow appear
grayed out and are unavailable.
253
Intensity/Contrast
Prints a pattern that allows you to check the intensity/contrast balance.
Printer Paper Size
Selects the paper size to be used for pattern printing.
This setting is linked to Printer Paper Size on the Page Setup tab.
Note
Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot
be selected.
Amount of Pattern Instances
Sets the number of patterns to be printed.
You can select from Largest, Large, and Small. When you select a pattern size, the number of
patterns that can be printed is as follows:
Note
Largest and Large cannot be selected when certain paper sizes or output paper sizes are
selected.
The setting preview on the Main tab displays an image that allows you to check the overall
layout.
Largest
Cyan/Magenta/Yellow 37
Intensity/Contrast 49
Large
Cyan/Magenta/Yellow 19
Intensity/Contrast 25
Small
Cyan/Magenta/Yellow 7
Intensity/Contrast 9
Color Variation Between Instances
Sets the amount of color change between neighboring patterns.
Select from Large, Medium, and Small. Large produces a large amount of change, and Small
produces a small amount of change.
Note
Large is about double the size of Medium, and Small is about half the size of Medium.
Matching Tab
Allows you to select the method for adjusting colors to match the type of document to be printed.
Color Correction
Allows you to select Driver Matching, ICM (ICC Profile Matching), or None to match the purpose of
the print operation.
254
Important
When Grayscale Printing is checked on the Main tab, Color Correction appears grayed out
and is unavailable.
Driver Matching
With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer.
ICM (ICC Profile Matching)
Adjusts the colors by using an ICC profile when printing.
Important
If the application software is set so that ICM is disabled, ICM (ICC Profile Matching) is
unavailable for Color Correction and the printer may not be able to print the image data
properly.
None
Disables color adjustment with the printer driver.
Rendering Intent
Specifies the matching method to be used when you select ICM (ICC Profile Matching) for Color
Correction.
Saturation
This method reproduces images even more vividly than the Perceptual method.
Perceptual
This method reproduces images by focusing on colors that most people find desirable. Select
this method to print photos.
Relative Colorimetric
When image data is converted to the color space of the printer, this method converts the image
data so the color reproduction approximates the shared color regions. Select this method to print
image data with colors that are close to the original colors.
The white spots are reproduced as white spots (background color) on the paper.
Absolute Colorimetric
This method uses the white spot definitions in the input and output ICC profiles to convert the
image data.
Although the color and color balance of the white spots change, you may not be able to get the
desired output results because of the profile combination.
Important
Depending on the media type, you may obtain the same print results even when you change the
Rendering Intent setting.
Note
In the XPS printer driver, ICM has become ICC Profile Matching.
Related Topics
Setting the Print Quality Level (Custom)
Adjusting Color Balance
255
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
Specifying Color Correction
Adjusting Colors with the Printer Driver
Printing with ICC Profiles
Printing a Color Document in Monochrome
Displaying the Print Results before Printing
256
Page Setup tab Description
The Page Setup tab allows you to determine how a document is to be arranged on the paper. Also, this tab
allows you to set the number of copies and the order of printing. If the application which created the
document has a similar function, set them with the application.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
The printer illustration shows how to load paper to match the printer driver settings.
Check whether the printer is set up correctly by looking at the illustration before you start printing.
Page Size
Selects a page size.
Ensure that you select the same page size as you selected within the application.
If you select Custom..., the Custom Paper Size dialog box opens and allows you to specify any
vertical and horizontal dimensions for the paper size.
Orientation
Selects the printing orientation.
If the application used to create your document has a similar function, select the same orientation that
you selected in that application.
Portrait
Prints the document so that its top and bottom positions are unchanged relative to the paper feed
direction. This is the default setting.
Landscape
Prints the document by rotating it 90 degrees relative to the paper feed direction.
You can change the rotation direction by going to the Maintenance tab, opening the Custom
Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape]
check box.
257
To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left
when orientation is [Landscape] check box.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will
be reversed vertically and horizontally.
Printer Paper Size
Selects the size of paper actually loaded into the printer.
The default setting is Same as Page Size to perform normal-sized printing.
You can select a printer paper size when you select Fit-to-Page, Scaled, Page Layout, Tiling/Poster,
or Booklet for Page Layout.
If you select a paper size that is smaller than the Page Size, the document size will be reduced. If you
select a paper size that is larger, the document size will be enlarged.
Also if you select Custom..., the Custom Paper Size dialog box opens and allows you to specify any
vertical and horizontal dimensions for the paper size.
Page Layout
Selects the size of the document you want to print and the type of printing.
Normal-size
This is the normal printing method. Select this when you do not specify any page layout.
Automatically reduce large document that the printer cannot output
If the printer cannot print the paper size of a document, the printer can automatically reduce
the size when it prints the document.
Check this check box to reduce the size when printing the document.
Borderless
Chooses whether you are printing on a full page without any page margins or printing with page
margins.
In borderless printing, originals are enlarged to extend slightly off the paper. Thus, printing can be
performed without any margins (border).
Use Amount of Extension to adjust how much of the document extends off the paper during
borderless printing.
Amount of Extension
Adjusts how much of the document extends off the paper during borderless printing.
Moving the slider to the right increases the amount of extension and allows you to perform
borderless printing with no problems.
Moving the slider to the left reduces the amount of extension and expands the range of the
document to print.
Fit-to-Page
This function enables you to automatically enlarge or reduce documents to fit to the paper size
loaded in the printer without changing the paper size you specified in your application software.
Scaled
Documents can be enlarged or reduced to be printed.
Specify the size in Printer Paper Size, or enter the scaling ratio in the Scaling box.
Scaling
Specifies an enlargement or reduction ratio for the document you want to print.
258
Page Layout
Multiple pages of document can be printed on one sheet of paper.
Specify...
Opens the Page Layout Printing dialog box.
Click this button to set details on page layout printing.
Tiling/Poster
This function enables you to enlarge the image data and divide the enlarged data into several
pages to be printed. You can also glue together these sheets of paper to create large printed
matter, such as a poster.
Specify...
Opens the Tiling/Poster Printing dialog box.
Click this button to set details on tiling/poster printing.
Booklet
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of
the paper. This type of printing ensures that pages can be collated properly, in page number order,
when the printed sheets are folded and stapled at the center.
Specify...
Opens the Booklet Printing dialog box.
Click this button to set details on booklet printing.
Duplex Printing
Selects whether to print the document automatically on both sides or one side of a sheet of paper.
Check this check box to print the document on both sides.
This function can be used only when Plain Paper, Ink Jet Hagaki (A), Hagaki K (A), Hagaki (A), or
Hagaki is selected for Media Type and one of Normal-size, Fit-to-Page, Scaled, or Page Layout is
selected.
Automatic
Selects whether duplex printing is to be performed automatically or manually.
This check box will be enabled if Booklet is selected from the Page Layout list or the Duplex
Printing check box is checked.
To perform duplex printing automatically, check this check box.
To perform duplex printing manually, uncheck this check box.
Print Area Setup...
Opens the Print Area Setup dialog box in which you can configure the print area for automatic
duplex printing.
This button will be enabled if automatic duplex printing is set when Borderless is not selected.
Stapling Side
Selects the stapling margin position.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
stapling margin position. Check Stapling Side, and select from the list to change it.
Specify Margin...
Opens the Specify Margin dialog box.
You can specify the width of the margin.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
259
Important
If the application used to create your document has a similar function, specify the number of copies
with the application without specifying it here.
Print from Last Page
Check this check box when you want to print from the last page in order. If you do this, you do not need
to sort the pages into their correct order after printing.
Uncheck this check box to print your document in normal order, starting from the first page.
Collate
Check this check box to group together the pages of each copy when you want to print multiple copies.
Uncheck this check box when you want to print with all pages of the same page number grouped
together.
Important
When the application software that you used to create the document has the same function, give
priority to the printer driver settings. However, if the print results are not acceptable, specify the
function settings on the application software. When you specify the number of copies and the
printing order with both the application and this printer driver, the number of copies may be
multiplied numbers of the two settings or the specified printing order may not be enabled.
Print Options...
Opens the Print Options dialog box.
Changes detailed printer driver settings for print data that is sent from applications.
Stamp/Background... (Stamp...)
Opens the Stamp/Background (Stamp) dialog box.
The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The Background function allows you to print a light
illustration behind the document data.
Note
With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and
only the stamp function can be used.
Depending on the type of printer driver you are using and the environment, Stamp and Background
may not be available.
Custom Paper Size dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Units
Select the unit for entering a user-defined paper size.
Paper Size
Specifies the Width and the Height of the custom paper. Measurement is shown according to the
units specified in Units.
260
Page Layout Printing dialog box
This dialog box allows you to select the number of document pages to be placed on one sheet of paper,
the page order, and whether a page border line is to be printed around each document page.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Preview Icon
Shows the settings made on the Page Layout Printing dialog box.
You can check what the print result will look like before you actually print the data.
Pages
Specifies the number of document pages to fit on one sheet.
Page Order
Specifies the document orientation to be printed on a sheet of paper.
Page Border
Prints a page border line around each document page.
Check this check box to print the page border line.
Tiling/Poster Printing dialog box
This dialog box allows you to select the size of the image to be printed. You can also make settings for cut
lines and paste markers which are convenient for pasting together the pages into a poster.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Preview Icon
Shows the settings of the Tiling/Poster Printing dialog box.
You can check what the print result will look like.
Image Divisions
Select the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create a
larger poster.
Print "Cut/Paste" in margins
Specifies whether to print the words "Cut" and "Paste" in the margins. These words serve as
guidelines for pasting together the pages into a poster.
Check this check box to print the words.
Note
Depending on the type of printer driver you are using and the environment, this function may not
be available.
Print "Cut/Paste" lines in margins
Specifies whether to print cut lines that serve as guidelines for pasting together the pages into a
poster.
Check this check box to print the cut lines.
Print page range
Specifies the printing range. Select All under normal circumstances.
Select Pages to specify a specific page or range.
261
Note
If some of the pages have not been printed well, specify the pages that do not need to be printed
by clicking them in the settings preview of the Page Setup tab. Only the pages shown on the
screen will be printed this time.
Booklet Printing dialog box
This dialog box allows you to set how to bind the document as a booklet. Printing only on one side and
printing a page border, can also be set in this dialog box.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Preview Icon
Shows the settings made on the Booklet Printing dialog box.
You can check what the document will look like when printed as a booklet.
Margin for stapling
Specifies which side of the booklet is to be stapled.
Insert blank page
Selects whether to print the document on one side or both sides of the booklet.
Check this check box to print the document on one side of the booklet and select the side to be left
blank from the list.
Margin
Specifies the width of the stapling margin.
The specified width becomes the stapling margin from the center of the sheet.
Page Border
Prints a page border line around each document page.
Check this check box to print the page border line.
Print Area Setup dialog box
When you perform duplex printing, the print area of the document becomes slightly narrower than usual.
Therefore when a document that has small margins is printed, the document may not fit on one page.
This dialog box allows you to set whether the page is to be reduced when printed so that the document
fits in one page.
Use normal-size printing
Prints the document pages without reducing them. This is the default setting.
Use reduced printing
Slightly reduces each document page so that it fits on one sheet of paper during printing.
Select this setting when using automatic duplex printing to print a document with small margins.
Specify Margin dialog box
This dialog box allows you to specify the margin width for the side to be stapled. If a document does not fit
on one page, the document is reduced when printed.
262
Margin
Specifies the width of the stapling margin.
The width of the side specified by Stapling Side becomes the stapling margin.
Print Options dialog box
Makes changes to print data that is sent to the printer.
Depending on the type of printer driver you are using and the environment, this function may not be
available.
Disable ICM required from the application software
Disables the ICM function required from the application software.
When an application software uses Windows ICM to print data, unexpected colors may be produced
or the printing speed may decrease. If these problems occur, checking this check box may resolve
the problems.
Important
Uncheck this check box under normal circumstances.
This function does not work when ICM is selected for Color Correction on the Matching tab of
the Manual Color Adjustment dialog box.
Note
Disable ICM required from the application software tab cannot be used with the XPS printer
driver.
Disable the color profile setting of the application software
Checking this check box disables information in the color profile that was set on the application
software.
When the information in the color profile set on the application software is output to the printer driver,
the print result may contain unexpected colors. If this happens, checking this check box may resolve
the problem.
Important
Even when this check box is checked, only some of the information in the color profile is
disabled, and the color profile can still be used for printing.
Uncheck this check box under normal circumstances.
Disable the paper source setting of the application software
Disables the paper feeding method that is set by the application.
With some applications such as Microsoft Word, the data may be printed with a feeding method that
differs from the printer driver setting. In this case, check this function.
Important
When this function is enabled, normally the paper feeding method cannot be changed from the
Canon IJ Preview.
However, if you are using the XPS printer driver, you will be able to change the paper feeding
method from the Canon IJ XPS Preview.
263
Ungroup Papers
Sets the display method of Media Type, Page Size, and Printer Paper Size.
To display the items separately, select the check box.
To display the items as a group, clear the check box.
Do not allow application software to compress print data
Compression of the application software print data is prohibited.
If the print result has missing image data or unintended colors, selecting this check box may improve
the condition.
Important
Uncheck this check box under normal circumstances.
Note
Do not allow application software to compress print data tab cannot be used with the XPS
printer driver.
Print after creating print data by page
The print data is created in page units, and printing starts after the processing of one page of print
data is complete.
If a printed document contains unintended results such as streaks, selecting this check box may
improve the results.
Important
Uncheck this check box under normal circumstances.
Scale images using nearest-neighbor interpolation
When an image is to be enlarged or reduced when printed, the printer uses a simple interpolation
process to enlarge or reduce the image.
If the image data in a printed document is not printed clearly, selecting this check box may improve
the results.
Important
Uncheck this check box under normal circumstances.
Note
Scale images using nearest-neighbor interpolation can be used only with the XPS printer
driver.
Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application software and then print
the data.
Depending on the application software being used, the image data may be cut off or may not be
printed properly. In such cases, select On. If you will not be using this function, select Off.
Important
When using this function, the print quality may drop depending on the print data.
Unit of Print Data Processing
Selects the processing unit of the print data to be sent to the printer.
Select Recommended under normal circumstances.
264
Important
A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
Note
Unit of Print Data Processing tab cannot be used with the XPS printer driver.
Stamp/Background (Stamp...) dialog box
The Stamp/Background (Stamp...) dialog box allows you to print a stamp and/or background over or
behind the document pages. In addition to the pre-registered ones, you can register and use your original
stamp or background.
Note
With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and
only the stamp function can be used.
Stamp
Stamp printing is a function that prints a stamp over a document.
Check this check box and select a title from the list to print a stamp.
Define Stamp...
Opens the Stamp Settings dialog box.
You can check the details of a selected stamp or save a new stamp.
Place stamp over text
Sets how the stamp is to be printed over the document.
Check the Stamp check box to enable this.
Check this check box to print a stamp over the printed document page. The printed data may be
hidden behind the stamp.
Uncheck this check box to print the document data over the stamp. The printed data will not be
hidden behind the stamp. However, the sections of the stamp that are overlapped by the document
may be hidden.
Print semitransparent stamp
Sets how the stamp is to be printed over the document.
Check the Stamp check box to enable this.
Check this check box to print a semi-transparent stamp over the printed document page.
Uncheck this check box to print the stamp over the document data. The printed data may be hidden
behind the stamp.
Note
You can use Print semitransparent stamp only with the XPS printer driver.
Stamp first page only
Selects whether the stamp is to be printed on the first page only or on all pages when the document
has two or more pages.
Check the Stamp check box to enable this.
Check this check box to print a stamp on the first page only.
265
Background
Background printing is a function that allows you to print an illustration or a similar object (bitmap)
behind the document.
Check this check box to print a background and select a title from the list.
Select Background...
Opens the Background Settings dialog box.
You can register a bitmap as a background, and change layout method and intensity of the selected
background.
Background first page only
Selects whether to print the background on the first page only or print on all pages when the
document has two or more pages.
Check the Background check box to enable this.
Check this check box to print a background on the first page only.
Stamp Tab
The Stamp tab allows you to set the text and bitmap file (.bmp) to be used for a stamp.
Preview Window
Shows the status of the stamp configured in each tab.
Stamp Type
Specifies the stamp type.
Select Text to create a stamp with characters. Select Bitmap to create with a bitmap file. Select
Date/Time/User Name to display the creation date/time and user name of the printed document.
The setting items in the Stamp tab change depending on the selected type.
When Stamp Type is Text or Date/Time/User Name
Stamp Text
Specifies the stamp text string.
Up to 64 characters can be entered.
For Date/Time/User Name, the creation date/time and user name of the printed object are
displayed in Stamp Text.
Important
Stamp Text appears grayed out and is unavailable if Date/Time/User Name is selected.
TrueType Font
Selects the font for the stamp text string.
Style
Selects the font style for the stamp text string.
Size
Selects the font size for the stamp text string.
Outline
Selects a frame that encloses the stamp text string.
If a large font size is selected for Size, characters may extend outside of the stamp border.
266
Color/Select Color...
Shows the current color for the stamp.
To select a different color, click Select Color... to open the Color dialog box, and select or create a
color you wish to use as a stamp.
When Stamp Type is Bitmap
File
Specifies the name of the bitmap file to be used as the stamp.
Select File...
Opens the dialog box to open a file.
Click this button to select a bitmap file to be used as a stamp.
Size
Adjusts the size of the bitmap file to be used as a stamp.
Moving the slider to the right increases the size, moving the slider to the left decreases the size.
Transparent white area
Specifies whether to make white-filled areas of the bitmap transparent.
Check this check box to make white-filled areas of the bitmap transparent.
Note
Click Defaults to set Stamp Type to text, Stamp Text to blank, TrueType Font to Arial, Style to
Regular, Size to 36 points, Outline unchecked, and Color to gray with the RGB values (192, 192,
192).
Placement Tab
The Placement tab allows you to set the position where the stamp is to be printed.
Preview Window
Shows the status of the stamp configured in each tab.
Position
Specifies the stamp position on the page.
Selecting Custom from the list allows you to enter values for the X-Position and Y-Position
coordinates directly.
Orientation
Specifies the angle of rotation for the stamp. The angle can be set by entering the number of
degrees.
Negative values rotate the stamp clockwise.
Note
Orientation is enabled only when Text or Date/Time/User Name is selected for Stamp Type
on the Stamp tab.
Note
Click Defaults to set the stamp position to Center and the orientation to 0.
267
Save settings Tab
The Save settings tab allows you to register a new stamp or delete an unnecessary stamp.
Title
Enter the title to save the stamp you created.
Up to 64 characters can be entered.
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
Stamps
Shows a list of saved stamp titles.
Specify a title to display the corresponding stamp in Title.
Save/Save overwrite
Saves the stamp.
Enter a title in Title, and then click this button.
Delete
Deletes an unnecessary stamp.
Specify the title of an unnecessary stamp from the Stamps list, and click this button.
Background Tab
The Background tab allows you to select a bitmap file (.bmp) to be used as a background or determine
how to print the selected background.
Preview Window
Shows the status of the bitmap set on the Background tab.
File
Specifies the name of the bitmap file to be used as the background.
Select File...
Opens the dialog box to open a file.
Click this button to select a bitmap file (.bmp) to be used as the background.
Layout Method
Specifies how the background image is to be placed on the paper.
When Custom is selected, you can set coordinates for X-Position and Y-Position.
Intensity
Adjusts the intensity of the bitmap to be used as a background.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the
intensity. To print the background at the original bitmap intensity, move the slider to the rightmost
position.
Note
Depending on the type of printer driver you are using and the environment, this function may not be
available.
Click Defaults to set File to blank, Layout Method to Fill page, and the Intensity slider to the
middle.
268
Save settings Tab
The Save settings tab allows you to register a new background or delete an unnecessary background.
Title
Enter the title to save the background image you specified.
Up to 64 characters can be entered.
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
Backgrounds
Shows a list of registered background titles.
Specify a title to display the corresponding background in Title.
Save/Save overwrite
Saves the image data as a background.
After inserting the Title, click this button.
Delete
Deletes an unnecessary background.
Specify the title of an unnecessary background from the Backgrounds list, and then click this
button.
269
Maintenance tab Description
The Maintenance tab allows you to perform printer maintenance or change the settings of the printer.
Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels
are sufficiently high.
Deep Cleaning
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note
Deep Cleaning consumes a larger amount of ink than Cleaning.
Cleaning the print heads frequently will rapidly deplete your printer's ink supply. Therefore, perform
cleaning only when necessary.
Print Head Alignment
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head.
When you click Print Head Alignment, the Start Print Head Alignment dialog box is displayed.
270
Nozzle Check
Prints a nozzle check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check
pattern, and check whether the print head is working properly.
If the print result for a specific color is fainted, or if there are any unprinted sections, click Cleaning to
clean the print head.
To display a list of items that you should check before printing the nozzle check pattern, click Initial
Check Items.
Print Check Pattern
This function prints a pattern that allows you to check whether the any of the ink nozzles are
clogged.
Click Print Check Pattern. When the confirmation message is displayed, click OK. The Pattern
Check dialog box is then displayed.
Left-side bitmap (good)
The print head nozzles are not clogged.
Right-side bitmap (bad)
The print head nozzles may be clogged.
Exit
Closes the Pattern Check dialog box, and returns to the Maintenance tab.
Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or if a specific color fails to print, even though
all ink levels are sufficiently high.
Power Off
Turns off the printer from the printer driver.
Perform this function to turn off the printer when you cannot press the ON button (POWER button) on
the printer because the printer is out of your reach.
You must press the ON button (POWER button) on the printer to turn the printer on again after clicking
this button. When you use this function, you will not be able to turn the printer on from the printer driver.
Auto Power
Opens the Auto Power Settings dialog box.
Specify settings for operating the printer power automatically. Perform this function if you want to
change the auto power settings.
Note
If the printer is off or if communication between the printer and the computer is disabled, an error
message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
271
Quiet Settings
Opens the Quiet Settings dialog box.
Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the printer.
This mode comes in handy when the operating noise of the printer becomes a concern, such when
printing at night. Perform this operation when you want to change the quiet mode setting.
Note
If the printer is off or if communication between the printer and the computer is disabled, an error
message may appear because the computer cannot collect the printer status.
Custom Settings
Opens the Custom Settings dialog box.
Perform this function to change the settings of this printer.
Note
If the printer is off or if communication between the printer and the computer is disabled, an error
message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
View Print History
This function starts the Canon IJ XPS preview, and displays the print history.
Note
You can use this function only with the XPS printer driver.
View Printer Status
Starts the Canon IJ Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.
Note
If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPS
Status Monitor".
About
Opens the About dialog box.
The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.
Initial Check Items (Cleaning / Deep Cleaning)
Before running Cleaning or Deep Cleaning, check that the printer power is on, and open the cover of the
printer.
Check the following items for each ink.
Check the amount of ink remaining in the tank.
Make sure that you push in the ink tank completely until you hear a clicking sound.
If an orange tape is adhered to the ink tank, peel it off completely.
Any remaining tape will hinder ink output.
272
Check that the ink tanks are installed in their correct positions.
Start Print Head Alignment dialog box
This dialog box allows you to adjust the attachment position for the print head, or to print the current
setting value for the print head position.
Align Print Head
Aligns the print head.
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head.
Print Alignment Value
Click this button to check the current setting value of the print head position.
Prints the current setting value for the print head position.
Print Head Alignment dialog box
To adjust the print head position manually, click Align Print Head in the Start Print Head Alignment
dialog box, and perform the operations instructed in the messages. The Print Head Alignment dialog
box is then displayed.
This dialog box allows you to check the printed pattern and adjust the print head position.
Preview Window
Displays the pattern of Print Head Alignment, and checks the position of the selected pattern.
You can also change the setting by clicking the pattern on the screen directly.
Select the Pattern Number
Compare the printed adjustment patterns, and enter the pattern number of the pattern with the
least visible streaks or horizontal stripes into the corresponding box.
Note
If you do not know how to analyze the printed pattern, see Adjusting Print Head Position.
Initial Check Items (Nozzle Check)
Before running Nozzle Check, check that the printer power is on, and open the cover of the printer.
Check the following items for each ink.
Check the amount of ink remaining in the tank.
Make sure that you push in the ink tank completely until you hear a clicking sound.
If an orange tape is adhered to the ink tank, peel it off completely.
Any remaining tape will hinder ink output.
Check that the ink tanks are installed in their correct positions.
Auto Power Settings dialog box
When you click Auto Power, the Auto Power Settings dialog box is displayed.
This dialog box allows you to manage the printer power from the printer driver.
273
Auto Power On
Selects the auto power-on setting.
Specify Disable to prevent the printer from turning on automatically when print data is sent to it.
Make sure the printer is on and then click OK to change the printer settings.
Specify Enable to turn the printer on automatically when print data is sent to it.
Auto Power Off
Selects the auto power-off setting.
If a printer driver operation or a printer operation is not performed within the specified time, the printer
turns off.
Quiet Settings dialog box
When you click Quiet Settings, the Quiet Settings dialog box is displayed.
Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the printer.
Select when you wish to reduce the operating noise of the printer at night, etc.
Using this function may lower the print speed.
Do not use quiet mode
Select this option when you wish to use the printer with volume of normal operating noise.
Always use quiet mode
Select this option when you wish to reduce the operating noise of the printer.
Use quiet mode during specified hours
Select this option when you wish to reduce the operating noise of the printer during a specified period
of time.
Set the Start time and the End time of the quiet mode you wish to be activated. If both are set to the
same time, the quiet mode will not function.
Important
You can set the quiet mode from the operation panel of the printer, the printer driver, or ScanGear
(scanner driver).
No matter how you use to set the quiet mode, the mode is applied when you perform operations from
the operation panel of the printer or printing and scanning from the computer.
If you specify a time for Use quiet mode during specified hours, quiet mode is not applied to
operations (copy, direct print, etc.) performed directly from the printer.
Custom Settings dialog box
When you click Custom Settings, the Custom Settings dialog box is displayed.
If necessary, switch between various modes of printer operation.
Detects a printable disc in the disc tray
Detects whether a printable disc is loaded on the disc tray during disc label printing and displays a
message if a disc is not loaded.
Check this check box to print with detecting whether a printable disc is loaded.
274
Important
If you leave this check box unchecked, the printer may print to the disc tray even if a printable
disc is not loaded on the disc tray. Therefore, you should check this check box under normal
circumstances.
If you load a printable disc that has already been printed onto the disc tray, the printer may detect
that no printable disc is loaded on the tray. In this case, uncheck this check box.
Prevent paper abrasion
The printer can increase the gap between the print head and the paper during high-density printing to
prevent paper abrasion.
Check this check box to enable this function.
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head
alignment, but you can change it to manual head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head
alignment.
Check this check box to perform the manual head alignment.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.
To rotate the document 90 degrees to the left when printing, select the check box.
Note
If Yougata 4 4.13"x9.25", Yougata 6 3.86"x7.48", Envelope Com 10, or Envelope DL is
selected for Page Size on the Page Setup tab, the printer rotates the paper 90 degrees to the
left to print, regardless of the Rotate 90 degrees left when orientation is [Landscape] setting
for Custom Settings on the Maintenance tab.
Don't detect mismatch of paper settings when printing from computer
When you print documents from your computer and the paper settings in the printer driver and the
paper information registered on the printer do not match, this setting disables the message display
and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
Ink Drying Wait Time
The printer can pause before printing a subsequent page. Moving the slider to the right increases the
pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
About dialog box
When you click About, the About dialog box is displayed.
This dialog box displays the version, copyright, and module list of the printer driver. You can select the
language to be used and switch the language displayed in the setup window.
Modules
Lists the printer driver modules.
275
Language
Specifies the language you wish to use in the printer driver setup window.
Important
If the font for displaying the language of your choice is not installed in your system, the
characters will be garbled.
Related Topics
Cleaning the Print Heads
Adjusting Print Head Position
Printing a Nozzle Check Pattern
Managing the Printer Power
Reducing the Printer Noise
Changing the Printer Operation Mode
276
Canon IJ Status Monitor Screen
The Canon IJ Status Monitor displays the printer status and the printing progress. The printer status is
shown by the images, icons, and messages in the status monitor.
Features of the Canon IJ Status Monitor
The Canon IJ Status Monitor has the following functions:
Onscreen display of printer status
The status monitor displays the printer status in real-time.
You can check the progress of each document to be printed (print job).
Display of error content and correction procedure
The status monitor displays information on any errors that occur on the printer.
You can then immediately check what sort of action to perform.
Ink status display
The status monitor displays ink tank types and estimated ink levels.
When the remaining ink level becomes low, a warning icon and message (low ink level warning)
are displayed.
Overview of the Canon IJ Status Monitor
The Canon IJ Status Monitor uses images and messages to display the printer status and the ink status.
During printing, you can check information about the document being printed and the print progress.
If an error occurs, the status monitor displays the error content and instructions on how to correct the
error. Follow the message instructions.
Printer
Canon IJ Status Monitor shows an icon when a warning or error occurs to the printer.
: There is a warning.
: There has been an operator error.
: There is a notice about ink levels etc.
: There has been an error which requires a service.
Ink Tank
If a low ink warning or an empty ink tank error occurs, the status monitor displays an icon. The
status monitor also uses images to display the estimated ink levels of the ink tanks.
277
Click the image to display the Ink Details dialog box showing detailed information such as the
remaining ink levels and the names of ink tanks that the printer can use.
Document Name
Name of the document being printed.
Owner
Owner's name of the document being printed.
Printing Page
Page number of current page and the total page count.
Display Print Queue
The print queue, which controls the current document and documents waiting to be printed.
Cancel Printing
Cancels printing.
Estimated ink levels
Displays icons to report a remaining ink level warning and an ink depletion error.
Click (the disclosure triangle) to display a pictorial representation of the estimated ink level in
the ink tank.
Ink Model Number
You can look up the correct ink tank for your printer.
Option Menu
If a printer message appears, select Enable Status Monitor to start the Canon IJ Status Monitor.
Select Enable Status Monitor to use the following commands:
Always Display Current Job
Displays the Canon IJ Status Monitor whenever a document is being printed.
Always Display on Top
Displays the Canon IJ Status Monitor in front of other windows.
Display Guide Message
Displays guide messages for complicated paper setting operations.
Envelope Printing
Displays guide messages when envelope printing starts.
To hide these guide messages, select the Do not show this message again check
box.
To display the guide messages again, open the Option menu, select Display Guide
Message, click Envelope Printing, and enable this setting.
Hagaki Printing
Displays guide messages before the printer begins hagaki printing.
To hide these guide messages, select the Do not show this message again check
box.
To display the guide messages again, open the Option menu, select Display Guide
Message, click Hagaki Printing, and enable this setting.
Display Warning Automatically
When a Low Ink Warning Occurs
Starts the Canon IJ Status Monitor window automatically and displays it in front of the
other windows when a low ink warning occurs.
278
Start when Windows is Started
Automatically starts the Canon IJ Status Monitor when Windows is started.
Remote UI menu
You are able to open the printer's Remote User Interface.
You are able to check the printer status and run maintenance functions on the printer when
connected to and using it through a network.
Note
When the printer is being used via USB connection Remote UI will not display.
Printer Information
Allows you check detailed information, such as the printer status, the print progress, and
remaining ink levels.
Maintenance
Allows you to run printer maintenance and change printer settings.
Download Security Certificate
Displays the For secure communication window.
This window allows you to download the route certificate, register it to the browser, and
disable warning displays.
Help Menu
Select this menu to display Help information for the Canon IJ Status Monitor including version
and copyright information.
279
Installing the MP Drivers
You can access our web site through the Internet and download the latest MP Drivers and XPS printer driver
for your model.
The procedure for installing the downloaded MP Drivers is as follows:
1.
Turn off the printer
2.
Start the installer
Double-click the icon of the downloaded file.
The installation program starts.
Important
A confirmation/warning dialog box may appear when starting, installing or uninstalling software.
This dialog box appears when administrative rights are required to perform a task.
When you are logged on to an administrator account, click Yes (or Continue, Allow) to continue.
Some applications require an administrator account to continue. In such cases, switch to an
administrator account, and restart the operation from the beginning.
3.
Install the MP Drivers
Take the appropriate action as described on the screen.
4.
Complete the installation
Click Complete.
Depending on the environment you are using, a message prompting you to restart the computer may be
displayed. To complete the installation properly, restart the computer.
Important
You can install the XPS printer driver with the same procedure for installing the MP Drivers. However,
when installing the XPS printer driver, first complete installation of the MP Drivers.
You can download the MP Drivers and XPS printer driver for free, but any Internet access charges
incurred are your responsibility.
Before installing the latest MP Drivers, delete the previously installed version.
Related Topics
Obtaining the Latest MP Drivers
Deleting the Unnecessary MP Drivers
Before Installing the MP Drivers
280
Printing Directly from Smartphone/Tablet
Android Print
Printing from an AirPrint-enabled Printer with iOS Device
Using Printer with Wireless Direct
Printing by Placing Smartphone over Printer
281
Using Printer with Wireless Direct
You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.
Wireless connection (connecting devices via a wireless router)
Direct wireless connection (connecting devices using Wireless Direct)
This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the
printer directly.
Follow the procedure below to use Wireless Direct.
1. Changing Printer's Settings
2. Changing Settings of a Device and Connecting It to the Printer
3. Printing/Scanning with Wireless Direct
This section also describes changing Wireless Direct to wireless LAN.
Changing Printer Setting to Use Wireless LAN
Important
You can connect up to 5 devices to the printer at the same time.
Check the usage restrictions and switch the printer to the Wireless Direct.
Restrictions
Preparing for Wireless Direct
Change settings below to prepare for Wireless Direct.
Printer's LAN settings
Changing Printer's Settings
Settings of a device to connect
Changing Settings of a Device and Connecting It to the Printer
Changing Printer's Settings
1.
Make sure printer is turned on.
2.
Select Setup on the HOME screen.
Using the Operation Panel
3. Select Settings.
4. Select Device settings.
282
5. Select LAN settings.
6. Select Wireless Direct.
7. Select Wireless Direct active/inactive.
8.
Select ON.
The confirmation screen asking if you display the password information appears.
9.
Select Yes or No.
The list of Wireless Direct settings is displayed.
The device detects the printer by the identifier (SSID).
Note
You can check the following.
SSID
Security setting
Password
Printer's name which appears on a Wi-Fi Direct compatible device
The password is required when connecting a device to the printer. Depending on the device
you are using, no password is required.
When you connect a Wi-Fi Direct compatible device to the printer, select the device name
displayed on the touch screen from your device.
The identifier (SSID) and the security setting are specified automatically. To update them, see
below.
Changing Wireless Direct Setting
10.
Select OK.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.
Changing Settings of a Device and Connecting It to the Printer
1. Turn on wireless communication on your device.
Enable "Wi-Fi" on your device's "Setting" menu.
For more on turning on wireless communication, see your device's instruction manual.
2. Select "DIRECT-XXXX-TS9000series" ("X" represents alphanumeric characters) from
list displayed on device.
Note
If "DIRECT-XXXX-TS9000series" does not appear on the list, Wireless Direct is not enabled.
283
See Changing Printer's Settings to enable Wireless Direct.
3. Enter password.
Your device is connected to the printer.
Note
Check the password for the Wireless Direct.
Check by one of the following methods.
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
Depending on the device you are using, entering the password is required to connect a
device to the printer via wireless LAN. Enter the password specified for the printer.
If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting
to the printer, the printer displays a confirmation screen asking if you allow the device to
connect to the printer.
Make sure the name on the touch screen is the same as that of your wireless communication
device and tap Yes.
Printing/Scanning with Wireless Direct
Connect a device and the printer and start printing/scanning.
Note
For more on printing or scanning from a device via wireless LAN, refer to the device's or application's
instruction manual.
You can print/scan from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY.
Download it from App Store and Google Play.
For iOS
For Android
Changing Printer Setting to Use Wireless LAN
Follow the procedure below to change the printer setting to use wireless LAN.
1. Select Setup on the HOME screen.
Using the Operation Panel
2. Select Settings.
284
3. Select Device settings.
4. Select LAN settings.
5. Select Wireless LAN.
6.
Select WLAN active/inactive.
7.
Select Active.
If you do not use the printer over wireless LAN, select Inactive.
Changing Wireless Direct Setting
Change the settings for the Wireless Direct following the procedure below.
1.
Make sure printer is turned on.
2.
Select Setup on the HOME screen.
Using the Operation Panel
3.
Select Settings.
4.
Select Device settings.
5.
Select LAN settings.
6.
Select Wireless Direct.
7. Select a setting item.
To update the identifier (SSID) and the password for Wireless Direct
285
Tap A to display the confirmation screen. To update the identifier (SSID) and the password, tap
Yes.
To check the security setting and the updated password, tap Details and tap Yes on the screen
displayed next.
To change the printer's name displayed on the Wi-Fi Direct compatible device
Tap B to display the printer's name (device name) displayed on a Wi-Fi Direct compatible device.
Follow the procedure below to change the name.
1. Tap touch screen.
2.
Enter device name (up to 32 characters).
3.
Tap OK to finish entering device name.
4.
Tap OK to finish specifying device name.
To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting
to the printer
Tap C to display the confirmation screen. If you want the printer to display the screen to inform
you a Wi-Fi direct compatible device is connecting to the printer, tap Yes.
Important
To prevent an unauthorized access, we recommend you should not change the setting from
the default.
To check the current Wireless Direct settings
Tap D to display the confirmation screen. To check the current Wireless Direct settings, tap Yes.
Note
If you select Print details, you can print the network settings.
8.
Press HOME button.
The HOME screen is displayed.
Note
If you change the Wireless Direct setting of the printer, also change the wireless router setting of the
device.
286
Printing Photo Data
Printing Photographs Saved on Memory Card
Special Photo Menu
Setting Items for Photo Printing Using Operation Panel
287
Printing Photographs Saved on Memory Card
You can print the photograph saved on the memory card easily.
This section describes the procedure to print the photograph in Select photo print.
1. Make sure printer is turned on.
2.
Load photo paper.
3.
Select Print on the HOME screen.
Using the Operation Panel
4.
Select From mem. card.
The memory card print menus are displayed.
5.
Select Select photo print.
6.
Insert memory card into card slot.
The photo selection screen is displayed.
Note
When you insert the memory card before you displays the memory card print menus, the photo
selection screen is displayed.
If no printable photo data is saved on the memory card, Data of supported types are not saved.
is displayed on the touch screen.
If more than 2,000 photo data are saved on the memory card, the photo data is split by group per
2,000 photos in reverse chronological order (date last modified) automatically. Check the message
displayed on the touch screen and select OK.
7. Specify settings as necessary.
To select the photo to print:
Flick horizontally to select the photo.
You can also select the photo by tapping "A".
288
You can print a copy of the displayed photo by touching the Color button.
To change the display method, the number of copies, or the print settings:
Tap near the bottom of the displayed photo to display menus.
A. Total number of copies
Total number of copies is displayed.
When tapping, the Check total no. of copies screen is displayed and you can check the
number of copies for each photo. On the Check total no. of copies screen, you can change
the number of copies for each photo.
B.
Number of copies
Tap to specify the number of copies.
1.
Flick vertically to specify the number of copies.
289
Tap to display the photo selection screen.
2. Tap to specify the number of copies.
Touch and hold to specify the number of copies by 10 copies.
Note
You can specify the number of copies for each photo. Display the photo you want to print
and specify the number of copies when the desired photo is displayed.
C.
Switching group
Tap to switch the photo group.
For details:
Using Useful Display Functions
D. Settings
Tap to display the Settings screen.
You can change the settings of page size, media type, and print quality and so on.
For more on the setting items:
Setting Items for Photo Printing Using Operation Panel
E.
Comparing photos
Tap to display two photos side-by-side.
290
For more on the display method:
Using Useful Display Functions
F.
Zooming in
Tap to zoom in on the photo.
For details:
Using Useful Display Functions
G. Date specification
Tap to select photo with specifying the date (last modified date of data).
For details:
Using Useful Display Functions
H.
Multi display
Tap to display the multiple photos at once.
291
For more on the display method:
Using Useful Display Functions
8.
Touch Color button.
The printer starts printing.
Note
Touch the Stop button to cancel printing.
While processing the print job, you can add the print job (Reserve photo print).
Adding Print Job
Adding Print Job
You can add the print job (Reserve photo print) while printing photos.
Follow the procedure below to add the print job.
1.
Flick photo while printing to select next photo.
Note
While you select the photo, the printer prints the reserved photos.
The reserved photo icon appears on the photo included in the print job.
2. Specify the number of copies for each photo.
Note
While processing the print job, you cannot change the setting for Page size or Type on print
settings confirmation screen. The setting is the same as the setting for the photo included in the
print job.
3. Touch Color button.
The reserved photo is printed next to the photo that has already been started printing.
If you want to print more photos, operate from step 1 again.
292
Note
While processing the print job, you cannot display the HOME screen, change the print menu, or print
from the computer or other devices.
While processing the print job, the photo in other group is not selected.
If you touch the Stop button while processing the print job, the screen to select a method to cancel
reservation is displayed. If you tap Cancel all reservations, you can cancel printing all photos. If you
tap Cancel the last reservation, you can cancel the last printing job.
If there are many print jobs, Cannot reserve more print jobs. Please wait a while and redo the
operation. may be displayed on the touch screen. In this case, wait a while and add the print job.
293
Setting Items for Photo Printing Using Operation Panel
You can specify the setting of page size, media type, photo fix and so on to print the photos saved on the
memory card.
Print Settings Screen
How to display the print settings screen varies with the print menu.
In Select photo print or Slide show:
The following screen is displayed by selecting Settings.
In Trimming print or Print with creative filters:
The following screen is displayed before printing.
Setting Items
Flick vertically to display setting items and tap the setting item to display the settings. Tap to specify the
setting.
Note
Depending on the print menu, some setting items cannot be selected. This section describes the
setting items in Photo print.
The setting item which cannot be selected is displayed grayed out or not displayed.
Some settings cannot be specified in combination with the other setting items or the print menus. If
the setting which cannot be specified in combination is selected, and Error details are displayed
294
on the touch screen. In this case, tap on the upper left on the touch screen to check the message
and change the setting.
The settings of the page size, media type, etc. are retained even if another print menu is selected or
the printer is turned off.
You can specify the following setting items.
Page size
Select the page size of the loaded paper.
Type (Media type)
Select the media type of the loaded paper.
Paper src
Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.
Note
When Auto is selected, paper is fed from the paper source where the paper that matches the
paper settings (page size and media type) is loaded.
Print qlty (Print quality)
Select print quality according to the photo.
Border (Bordered/Borderless print)
Select bordered or borderless print.
Photo fix
When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and the
most suitable correction for each photo is made automatically. It makes a darkened face by backlight
brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each
scene with the most suitable color, brightness, or contrasts automatically to print.
Note
As a default, photos on the memory card are printed with auto correction applied.
If No correction is selected, photos are printed without correction.
Red-EyeCorrection
Corrects red eyes in portraits caused by flash photography.
Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may
be corrected.
Print date
Activates/deactivates to print the date (shooting date) on a photo.
Note
The shooting date is printed according to the settings of Date display format in Device user
settings under Device settings under Settings.
295
Device user settings
296
Disc Label Printing
Copying Label Side of Disc
Printing Photo from Memory Card onto Disc Label
297
Copying Label Side of Disc
You can copy the label of an existing BD/DVD/CD and print it on a printable disc.
Important
You cannot print on 3.15 inches / 8 cm printable discs.
Do not attach the disc tray or place the printable disc until the message asking you to set them is
displayed. Doing so can damage the printer.
1.
Make sure printer is turned on.
2.
Select Copy on the HOME screen.
Using the Operation Panel
3.
Select Disc label.
The print area setting screen is displayed.
4.
Specify print area.
A.
Specify the outer circle.
B.
Specify the inner circle.
Note
Measure the outer and inner diameters of the printing surface of the printable disc and make sure
you set a value smaller than the measured value for the outer diameter, and a value larger than
the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
5. Specify the amount of ink.
If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink.
298
6.
Follow on-screen instructions to load copy source BD/DVD/CD on platen glass and select
OK.
The print setting confirmation screen is displayed.
Important
Be sure to load the copy source BD/DVD/CD with its label side down on the center of the Platen
Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off.
7.
After checking print settings, touch Color button for color copying, or Black button for black
& white copying.
8. Follow on-screen instructions to set printable disc.
299
Note
You can see the procedure to set the printable disc by selecting How to set.
For more on setting the printable disc:
Placing a Printable Disc
9.
Select OK.
The printer starts copying.
Note
Touch the Stop button to cancel copying.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
To keep the print quality at an optimal level, we recommend you stop printing discs once every ten
discs when printing more than ten discs continuously. To stop the printing operation, detach the
disc tray from the printer and close the disc tray guide. After approximately three minutes have
elapsed, open the inner cover, attach the disc tray to the printer and resume printing.
If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings
under Device settings.
Print settings
300
Printing Photo from Memory Card onto Disc Label
You can print a photograph saved on a memory card onto the disc label of the printable disc.
Important
You cannot print on 3.15 inches / 8 cm printable discs.
Do not attach the disc tray or place the printable disc until the message asking you to set them is
displayed. Doing so can damage the printer.
1.
Make sure printer is turned on.
2.
Select Print on the HOME screen.
Using the Operation Panel
3.
Select From mem. card.
The memory card print menus are displayed.
4.
Select Print photos to disc label.
The print area setting screen is displayed.
5.
Insert memory card into card slot.
Note
When you insert the memory card before you displays the memory card print menus, the photo
selection screen in Select photo print is displayed.
To display the HOME screen, touch the HOME button.
If no printable photo data is saved on the memory card, Data of supported types are not saved.
is displayed on the touch screen.
If more than 2,000 photo data are saved on the memory card, the photo data is split by group per
2,000 photos in reverse chronological order (date last modified) automatically. Check the message
displayed on the touch screen and select OK.
6. Specify print area.
301
A. Specify the outer circle.
B.
Specify the inner circle.
Note
Measure the outer and inner diameters of the printing surface of the printable disc and make sure
you set a value smaller than the measured value for the outer diameter, and a value larger than
the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
7.
Specify the amount of ink.
If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink.
8.
Select a photo you want to print.
Note
Other Options
Using Useful Display Functions
9.
Specify print area with trimming.
A.
Drag to position the trimming frame.
B.
Drag to set the trimming frame size.
When the area to be cropped is specified, the print setting confirmation screen is displayed.
302
10. Check print settings and touch Color button.
11. Follow on-screen instructions to set printable disc.
Note
You can see the procedure to set the printable disc by selecting How to set.
For more on setting the printable disc:
Placing a Printable Disc
12.
Select OK.
The printer starts printing.
Note
Touch the Stop button to cancel printing.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
To keep the print quality at an optimal level, we recommend you stop printing discs once every ten
discs when printing more than ten discs continuously. To stop the printing operation, detach the
disc tray from the printer and close the disc tray guide. After approximately three minutes have
elapsed, open the inner cover, attach the disc tray to the printer and resume printing.
If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings
under Device settings.
Print settings
303
Paper Settings
By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent
the printer from misprinting by displaying the message before printing starts when the paper size or the
media type of the loaded paper differs from the print settings.
Note
The default display setting is different between when you print or copy from the operation panel of the
printer and when you print using the printer driver.
Default Setting for Displaying the Message which Prevents Misprinting
After loading paper:
When you close the feed slot cover:
The screen to register the rear tray paper information is displayed.
Register the paper size and the media type according to the loaded paper.
304
When you insert the cassette:
The screen to register the cassette paper information is displayed.
Register the paper size and the media type according to the loaded paper.
* You can load only plain paper in the cassette.
Important
For more on the proper combination of paper settings you can specify by the printer driver or on the
touch screen:
For Windows:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
For Mac OS:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
When the paper settings for printing or copying are different from the paper
information registered to the printer:
Ex:
305
Paper setting for printing or copying: A5
Paper information registered to the printer: A4
When you start printing or copying, a message is displayed.
Selecting OK on the touch screen displays the paper setting specified for printing or copying under the
message.
Check the message and select OK. When the screen to select the operation is displayed, select one of
the operations below.
Note
Depending on the setting, the choices below may not be displayed.
Print with the loaded paper.
Select if you want to print on the paper loaded without changing the paper settings.
306
For example, when the paper setting for printing or copying is A5 and the paper information
registered to the printer is A4, the printer starts printing or copying with A5 on the paper loaded.
Replace the paper and print
Select if you want to print after replacing the paper of the rear tray or the cassette.
For example, when the paper setting for printing or copying is A5 and the paper information
registered to the printer is A4, you load A5 sized paper before you start printing or copying.
The paper information registration screen is displayed after replacing the paper and closing the feed
slot cover or inserting the cassette. Register the paper information according to the paper that you
loaded.
Note
If you do not know what paper information to register to the printer, press the Back button when the
screen to select the operation is displayed. When the previous screen is displayed, check the paper
size and the media type and register them to the printer.
For more on the proper combination of paper settings you can specify by the printer driver or on the
touch screen:
For Windows:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
For Mac OS:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
Cancel
Cancels printing.
Select when you change the paper settings specified for printing or copying. Change the paper
settings and try printing again.
Default Setting for Displaying the Message which Prevents Misprinting
When you print using the operation panel of the printer:
The message which prevents misprinting is enabled by default.
To change the display setting when you copy or print using the operation panel of the printer:
Feed settings
When you print using the printer driver:
The message which prevents misprinting is disabled by default.
To change the display setting when you print using the printer driver:
For Windows:
Changing the Printer Operation Mode
For Mac OS:
Changing the Printer Operation Mode
307
Important
When the message which prevents misprinting is disabled:
The printer starts printing or copying even though the paper settings for printing or copying and the
paper information registered to the printer are different.
308
Making Copies
This section describes the procedure to copy with Standard copy.
1. Make sure printer is turned on.
2. Load paper.
3.
Select Copy on the HOME screen.
Using the Operation Panel
4.
Select Standard copy.
The Copy standby screen is displayed.
5.
Load original on platen glass.
6.
Specify settings as necessary.
A.
The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B.
Tap to specify the number of copies.
309
1.
Flick to specify the number of copies.
2.
Tap to specify the number of copies.
If you keep touching here, the number scrolls by 10.
C.
Tap to display the print setting items.
For more on the setting items:
Setting Items for Copying
D. Tap to preview an image of the printout on the preview screen.
For details:
Displaying Preview Screen
E.
Tap to specify the page size.
310
7.
Press Color button for color copying, or Black button for black & white copying.
The printer starts copying.
Remove the original on the platen glass after copying is complete.
Important
Do not open the document cover or remove the original from the platen glass until scanning is
completed.
Note
To cancel copying, touch the Stop button.
Adding Copying Job (Reserve copy)
You can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press the same button (the Color button or the Black button) as
the one which you previously pressed.
Important
When you load the original on the platen glass, move the document cover gently.
Note
When Print qlty (print quality) is set High, you cannot add the copying job.
311
When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
If you touch the Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you tap Cancel all reservations, you can cancel copying all scanned
data. If you tap Cancel the last reservation, you can cancel the last copying job.
If you set a document of too many pages to add the copying job, Cannot add more copy jobs.
Please wait a while and redo the operation. may appear on the touch screen. Tap OK and wait a
while, and then try copying again.
If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen
when scanning, tap OK and touch the Stop button to cancel copying. After that, copy the documents
that have not been finished copying.
312
Setting Items for Copying
You can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
For more on the print setting screen or the setting item for Photo copy, see Copying Photos.
How to display the print setting screen varies with the copy menu.
In Standard copy:
The following screen is displayed by tapping Settings on the Copy standby screen.
In Borderless copy, Frame erase copy, or ID card copy:
The following screen is displayed before copying.
Setting Items
Flick to display setting items and tap the setting item to display the settings. Tap to specify the setting.
Note
Depending on the copy menu, some setting items cannot be selected. This section describes the
setting items in Copy.
The setting item which cannot be selected is displayed grayed out.
For more on the setting items for Photo copy, see Copying Photos.
313
Some settings cannot be specified in combination with the setting of other setting item or the copy
menu. If the setting which cannot be specified in combination is selected, and Error details are
displayed on the touch screen. In this case, tap on the upper left on the touch screen to check the
message and change the setting.
The settings of the page size, media type, etc. are retained even if the printer is turned off.
When copying starts in the copy menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the touch screen. Change the
setting, following the on-screen instructions.
Following setting items can be changed.
Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing/Enlarging Copies
Intensity
Specify the intensity.
A. Tap to activate/deactivate automatic intensity adjustment.
When ON is selected, the intensity is adjusted automatically according to the originals loaded on
the platen glass.
B. Drag to specify the intensity.
Page size
Select the page size of the loaded paper.
Type (Media type)
Select the media type of the loaded paper.
Paper src
Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.
Note
When Auto is selected, paper is fed from the paper source where the paper that matches the
paper settings (page size and media type) is loaded.
Print qlty (Print quality)
314
Adjust print quality according to the original.
Important
If you use Draft with Type set to Plain paper and the quality is not as good as expected, select
Standard or High for Print qlty and try copying again.
Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
Layout
Select the layout.
Copying Two Pages onto Single Page
Copying Four Pages onto Single Page
2-sidedPrintSetting
Select whether to perform two-sided copying.
Two-Sided Copying
315
Scanning from Computer (Windows)
Using IJ Scan Utility
Scanning Using Application Software (ScanGear)
Other Scanning Methods
IJ Network Scanner Selector EX2 Menu and Setting Screen
Scanning Tips
Positioning Originals (Scanning from Computer)
Network Scan Settings
316
Using IJ Scan Utility
What Is IJ Scan Utility (Scanner Software)?
Starting IJ Scan Utility
Using Auto Scan Function Basics
Scanning Documents
Scanning Photos
Scanning Multiple Originals at One Time
IJ Scan Utility Screens
317
What Is IJ Scan Utility (Scanner Software)?
IJ Scan Utility is an application for scanning documents, photos, and other items.
Access all scanning functions to scan and save directly, from the icons in the IJ Scan Utility main screen.
IJ Scan Utility Features
Multiple Scanning Modes
Auto allows for one click scanning with default settings for various items. Document will sharpen text in
a document or magazine for better readability, and Photo is best suited for scanning photos.
Note
For details on the IJ Scan Utility main screen, see IJ Scan Utility Main Screen.
Save Scanned Images Automatically
Scanned images are automatically saved to a preset folder. The folder can be changed as needed.
Note
The default save folders are as follows.
Windows 10/Windows 8.1/Windows Vista:
Documents folder
Windows 8/Windows 7:
My Documents folder
To change folder, see Settings Dialog Box.
Application Integration
Scanned images can be sent to other applications. For example, display scanned images in your
favorite graphics application, attach them to e-mails, or extract text from images.
318
Important
Some functions are available only when My Image Garden is installed.
Note
To set the applications to integrate with, see Settings Dialog Box.
319
Starting IJ Scan Utility
Note
If you have more than one scanner or have changed from USB to network connection, set up the
network environment from IJ Scan Utility.
Network Scan Settings
Follow the steps below to start IJ Scan Utility.
Windows 10:
From Start menu, select All apps > Canon Utilities > IJ Scan Utility.
Windows 8.1/Windows 8:
Select IJ Scan Utility on the Start screen.
If IJ Scan Utility is not displayed on the Start screen, select the Search charm, and then search for "IJ Scan
Utility".
Windows 7/Windows Vista:
From Start menu, select All Programs > Canon Utilities > IJ Scan Utility > IJ Scan Utility.
320
Using Auto Scan Function
Auto Scan allows for automatic detection of the item type.
Important
The following types of items may not be scanned correctly. In that case, adjust the cropping frames
(scan areas) in whole image view of ScanGear (scanner driver), and then scan again.
Photos with a whitish background
Items printed on white paper, hand-written text, business cards, and other unclear items
Thin items
Thick items
1.
Make sure scanner or printer is turned on.
2.
Place items on platen.
Positioning Originals (Scanning from Computer)
3.
Start IJ Scan Utility.
4.
Click Auto.
Scanning starts.
Note
To cancel the scan, click Cancel.
To apply suitable corrections based on the item type, click Settings..., and then select the Apply
recommended image correction checkbox in the Settings (Auto Scan) dialog box.
Scanned images are saved in the folder set for Save in in the Settings (Auto Scan) dialog box
displayed by clicking Settings.... In the Settings (Auto Scan) dialog box, advanced scan settings can
also be made.
To scan a specific item type, see the following pages.
Scanning Photos
Scanning Documents
Scanning with Favorite Settings
321
IJ Scan Utility Screens
IJ Scan Utility Main Screen
Settings Dialog Box
Settings (Auto Scan) Dialog Box
Settings (Document Scan) Dialog Box
Settings (Photo Scan) Dialog Box
Settings (Save to PC (Auto)) Dialog Box
Settings (General Settings) Dialog Box
322
IJ Scan Utility Main Screen
Follow the steps below to start IJ Scan Utility.
Windows 10:
From Start menu, select All apps > Canon Utilities > IJ Scan Utility to start IJ Scan Utility.
Windows 8.1/Windows 8:
Select IJ Scan Utility on Start screen to start IJ Scan Utility.
If IJ Scan Utility is not displayed on the Start screen, select the Search charm, and then search for "IJ Scan
Utility".
Windows 7/Windows Vista:
From Start menu, select All Programs > Canon Utilities > IJ Scan Utility > IJ Scan Utility to start IJ Scan
Utility.
You can complete from scanning to saving at one time by simply clicking the corresponding icon.
Product Name
Displays the name of the product that IJ Scan Utility is currently set to use.
If the displayed product is not the one you want to use, select the desired product from the list.
In addition, for network connection, select one with "Network" after the product name.
Note
Refer to "Network Scan Settings" for how to set up a network environment.
Auto
Detects the item type automatically and saves them to a computer. The data format for saving will also
be set automatically.
Save settings and the response after scanning can be specified in the Settings (Auto Scan) dialog
box.
Document
Scans items as documents and saves them to a computer.
Scan/save settings and the response after scanning can be specified in the Settings (Document Scan)
dialog box.
Photo
Scans items as photos and saves them to a computer.
Scan/save settings and the response after scanning can be specified in the Settings (Photo Scan)
dialog box.
323
Custom
Scans items with your favorite settings and saves the images to a computer. The item type can be
automatically detected.
Scan/save settings and the response after scanning can be specified in the Settings (Custom Scan)
dialog box.
Stitch
Displays the Image Stitch window in which you can scan the left and right halves of an item larger than
the platen and combine the scanned images back into one image.
Scan/save settings and the response after scanning can be specified in the Settings (Scan and Stitch)
dialog box.
ScanGear
Starts ScanGear (scanner driver) in which you can make image corrections and color adjustments
when scanning.
Scan/save settings and applications can be specified in the Settings (ScanGear) dialog box.
Instructions
Opens this guide.
Settings...
Displays the Settings dialog box in which you can specify the scan/save settings and the response after
scanning.
324
Settings Dialog Box
The Settings dialog box has three tabs: (Scanning from a Computer), (Scanning from the
Operation Panel), and (General Settings). When you click a tab, the options available in the red
frame switches; set the details of each function on each tab as needed.
(Scanning from a Computer) Tab
Set the default actions when scanning from IJ Scan Utility or My Image Garden.
Settings (Auto Scan) Dialog Box
Settings (Document Scan) Dialog Box
Settings (Photo Scan) Dialog Box
Settings (Custom Scan) Dialog Box
Settings (Scan and Stitch) Dialog Box
Settings (ScanGear) Dialog Box
(Scanning from the Operation Panel) Tab
Set the default actions when scanning from the operation panel.
Settings (Save to PC (Auto)) Dialog Box
Settings (Save to PC (Document)) Dialog Box
325
Settings (Save to PC (Photo)) Dialog Box
Settings (Attach to E-mail (Auto)) Dialog Box
Settings (Attach to E-mail (Document)) Dialog Box
Settings (Attach to E-mail (Photo)) Dialog Box
Important
When the Settings dialog box is displayed from My Image Garden, the (Scanning from the
Operation Panel) tab does not appear.
(General Settings) Tab
Set the model to use, file size restriction on e-mail attachment, language for detecting text in images, and
the folder in which to save images temporarily.
Settings (General Settings) Dialog Box
326
Settings (Auto Scan) Dialog Box
Click Auto Scan on the (Scanning from a Computer) tab to display the Settings (Auto Scan) dialog
box.
In the Settings (Auto Scan) dialog box, you can make advanced scan settings to scan by automatically
detecting the item type.
(1) Scan Options Area
(2) Save Settings Area
(3) Application Settings Area
Important
When the Settings dialog box is displayed from My Image Garden, the setting items for Application
Settings do not appear.
Supported Items
Photos, postcards, business cards, magazines, newspapers, documents, and BD/DVD/CD.
Important
To scan the following types of items, specify the item type and size in the Settings (Document Scan)
dialog box, Settings (Photo Scan) dialog box, or Settings (Custom Scan) dialog box, then click
Photo, Document, or Custom in the IJ Scan Utility main screen. You cannot scan correctly with Auto.
A4 size photos
Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback
pages with the spine cut off
327
Items printed on thin white paper
Long narrow items such as panoramic photos
Reflective disc labels may not be scanned as expected.
Place items to be scanned on the platen correctly. Otherwise, items may not be scanned correctly.
Refer to "Positioning Originals (Scanning from Computer)" for how to place items.
Note
To reduce moire in scans, set Select Source to Magazine in the Settings (Document Scan) dialog
box or Settings (Custom Scan) dialog box, then click Document or Custom in the IJ Scan Utility main
screen.
(1) Scan Options Area
Apply recommended image correction
Applies suitable corrections automatically based on the item type.
Important
The color tone may differ from the source image due to corrections. In that case, deselect the
checkbox and scan.
Note
Scanning takes longer than usual when you enable this function.
(2) Save Settings Area
File Name
Enter the file name of the image to be saved. When you save a file, the date and four digits are
appended to the set file name in the "_20XX0101_0001" format.
Note
When you select the Save to a subfolder with current date checkbox, the date and four digits
are appended to the set file name.
Save in
Displays the folder in which to save the scanned images. To add a folder, select Add... from the pull-
down menu, then click Add in the displayed Select Destination Folder dialog box and specify the
destination folder.
The default save folders are as follows.
Windows 10/Windows 8.1/Windows Vista:
Documents folder
Windows 8/Windows 7:
My Documents folder
Important
When the Settings dialog box is displayed from My Image Garden, this option does not appear.
328
Data Format
Auto is selected. The following data formats are automatically applied according to the item type
when saving.
Photos, postcards, BD/DVD/CD, and business cards: JPEG
Magazines, newspapers, and documents: PDF
Important
The save format may differ depending on how you place the item.
Positioning Originals (Scanning from Computer)
JPEG Image Quality
You can specify the image quality of JPEG files.
PDF Compression
Select the compression type for saving PDF files.
Standard
It is recommended that you normally select this setting.
High
Compresses the file size when saving, allowing you to reduce the load on your network/server.
Create a PDF file that supports keyword search
Select this checkbox to convert text in images into text data and create PDF files that support
keyword search.
Note
PDF files that are searchable in the language selected in Document Language on the
(General Settings) tab of the Settings dialog box are created.
Save to a subfolder with current date
Select this checkbox to create a current date folder in the folder specified in Save in and save
scanned images in it. The folder will be created with a name such as "20XX_01_01"
(Year_Month_Date).
If this checkbox is not selected, files are saved directly in the folder specified in Save in.
(3) Application Settings Area
Open with an application
Select this when you want to enhance or correct the scanned images.
You can specify the application from the pull-down menu.
Send to an application
Select this when you want to use the scanned images as they are in an application that allows you to
browse or organize images.
You can specify the application from the pull-down menu.
329
Send to a folder
Select this when you also want to save the scanned images to a folder other than the one specified in
Save in.
You can specify the folder from the pull-down menu.
Attach to e-mail
Select this when you want to send e-mails with the scanned images attached.
You can specify the e-mail client you want to start from the pull-down menu.
Do not start any application
Saves to the folder specified in Save in.
Note
To add an application or folder to the pull-down menu, select Add... from the pull-down menu, then
click Add in the displayed Select Application or Select Destination Folder dialog box and specify
the application or folder.
Instructions
Opens this guide.
Defaults
You can restore the settings in the displayed screen to the default settings.
330
Settings (Document Scan) Dialog Box
Click Document Scan on the (Scanning from a Computer) tab to display the Settings (Document
Scan) dialog box.
In the Settings (Document Scan) dialog box, you can make advanced scan settings to scan items as
documents.
(1) Scan Options Area
(2) Save Settings Area
(3) Application Settings Area
Important
When the Settings dialog box is displayed from the Scan screen of My Image Garden, the setting items
for Application Settings do not appear.
(1) Scan Options Area
Select Source
Select the type of item to be scanned.
Scanning documents: Document
Scanning magazines: Magazine
331
Color Mode
Select the color mode in which to scan the item.
Paper Size
Select the size of the item to be scanned.
When you select Custom, a screen in which you can specify the paper size appears. Select a Unit,
then enter the Width and Height, and then click OK.
Note
Click Defaults to restore the specified settings to the default settings.
Resolution
Select the resolution of the item to be scanned.
The higher the resolution (value), the more detail in your image.
Resolution
Note
Only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings.
Image Processing Settings
Click (Plus) to set the following.
Note
When Color Mode is Black and White, only Reduce gutter shadow, Correct slanted text
document, and Detect the orientation of text document and rotate image appear.
Apply Auto Document Fix
Select this checkbox to sharpen text in a document or magazine for better readability.
Important
The color tone may differ from the source image due to corrections. In that case, deselect
the checkbox and scan.
Note
Scanning takes longer than usual when you enable this function.
Sharpen outline
Emphasizes the outline of the subjects to sharpen the image.
Reduce show-through
Sharpens text in an item or reduces show-through in newspapers, etc.
332
Reduce moire
Reduces moire patterns.
Printed materials are displayed as a collection of fine dots. "Moire" is a phenomenon where
uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots
are scanned.
Note
Scanning takes longer than usual when you enable Reduce moire.
Reduce gutter shadow
Reduces gutter shadows that appear between pages when scanning open booklets.
Note
Use ScanGear (scanner driver)'s Advanced Mode tab to correct gutter shadows when
scanning non-standard size items or specified areas.
Refer to "Gutter Shadow Correction" for your model from Home of the Online Manual for
details.
When you enable this function, scanning may take longer than usual with network
connection.
Correct slanted text document
Detects the scanned text and corrects the angle (within -0.1 to -10 degrees or +0.1 to +10
degrees) of the document.
Important
The following types of documents may not be corrected properly since the text cannot be
detected correctly.
Documents in which the text lines are inclined more than 10 degrees or the angles vary
by line
Documents containing both vertical and horizontal text
Documents with extremely large or small fonts
Documents with small amount of text
Documents containing figures/images
Hand-written text
Documents containing both vertical and horizontal lines (tables)
Note
Scanning takes longer than usual when you enable Correct slanted text document.
Detect the orientation of text document and rotate image
Automatically rotates the image to the correct orientation by detecting the orientation of text in
the scanned document.
Important
Only text documents written in the language selected from Document Language in the
Settings (General Settings) dialog box are supported.
The orientation may not be detected for the following types of settings or documents since
the text cannot be detected correctly.
333
Resolution is outside the range of 300 dpi to 600 dpi
Font size is outside the range of 8 points to 48 points
Documents containing special fonts, effects, italics, or hand-written text
Documents with patterned backgrounds
In that case, select the Check scan results and specify save settings checkbox, and then
rotate the image in the Save Settings dialog box.
(2) Save Settings Area
File Name
Enter the file name of the image to be saved. When you save a file, the date and four digits are
appended to the set file name in the "_20XX0101_0001" format.
Note
When you select the Save to a subfolder with current date checkbox, the date and four digits
are appended to the set file name.
Save in
Displays the folder in which to save the scanned images. To add a folder, select Add... from the pull-
down menu, then click Add in the displayed Select Destination Folder dialog box and specify the
destination folder.
The default save folders are as follows.
Windows 10/Windows 8.1/Windows Vista:
Documents folder
Windows 8/Windows 7:
My Documents folder
Important
When the Settings dialog box is displayed from My Image Garden, this option does not appear.
Data Format
Select the data format in which to save the scanned images.
You can select JPEG/Exif, TIFF, PNG, PDF, or PDF (Multiple Pages).
Important
You cannot select JPEG/Exif when Color Mode is Black and White.
When Start OCR is selected in Application Settings, you cannot select PDF or PDF (Multiple
Pages).
Note
With network connection, scanning may take longer than usual when you set TIFF or PNG in
Data Format.
PDF Compression
Select the compression type for saving PDF files.
334
Standard
It is recommended that you normally select this setting.
High
Compresses the file size when saving, allowing you to reduce the load on your network/server.
Important
This appears only when PDF or PDF (Multiple Pages) is selected in Data Format.
When Black and White is selected in Color Mode, this option does not appear.
JPEG Image Quality
You can specify the image quality of JPEG files.
Important
This appears only when JPEG/Exif is selected in Data Format.
Create a PDF file that supports keyword search
Select this checkbox to convert text in images into text data and create PDF files that support
keyword search.
Important
This appears only when PDF or PDF (Multiple Pages) is selected in Data Format.
Note
If text cannot be searched correctly, we recommend that you select 300 dpi or higher for
Resolution.
PDF files that are searchable in the language selected in Document Language on the
(General Settings) tab of the Settings dialog box are created.
Save to a subfolder with current date
Select this checkbox to create a current date folder in the folder specified in Save in and save
scanned images in it. The folder will be created with a name such as "20XX_01_01"
(Year_Month_Date).
If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Check scan results and specify save settings
Displays the Save Settings dialog box after scanning.
Important
When the Settings dialog box is displayed from My Image Garden, this option does not appear.
(3) Application Settings Area
Open with an application
Select this when you want to enhance or correct the scanned images.
You can specify the application from the pull-down menu.
335
Send to an application
Select this when you want to use the scanned images as they are in an application that allows you to
browse or organize images.
You can specify the application from the pull-down menu.
Send to a folder
Select this when you also want to save the scanned images to a folder other than the one specified in
Save in.
You can specify the folder from the pull-down menu.
Attach to e-mail
Select this when you want to send e-mails with the scanned images attached.
You can specify the e-mail client you want to start from the pull-down menu.
Start OCR
Select this when you want to convert text in the scanned image into text data.
You can specify the application from the pull-down menu.
Do not start any application
Saves to the folder specified in Save in.
Note
To add an application or folder to the pull-down menu, select Add... from the pull-down menu, then
click Add in the displayed Select Application or Select Destination Folder dialog box and specify
the application or folder.
Instructions
Opens this guide.
Defaults
You can restore the settings in the displayed screen to the default settings.
336
Settings (Save to PC (Auto)) Dialog Box
Click Save to PC (Auto) on the (Scanning from the Operation Panel) tab to display the Settings (Save
to PC (Auto)) dialog box.
In the Settings (Save to PC (Auto)) dialog box, you can specify how to respond when saving images to a
computer after scanning them from the operation panel by automatically detecting the item type.
(1) Scan Options Area
(2) Save Settings Area
(3) Application Settings Area
(1) Scan Options Area
Paper Size
Auto is selected.
Resolution
Auto is selected.
Image Processing Settings
Click (Plus) to set the following.
Apply recommended image correction
Applies suitable corrections automatically based on the item type.
337
Important
The color tone may differ from the source image due to corrections. In that case, deselect
the checkbox and scan.
Note
Scanning takes longer than usual when you enable this function.
(2) Save Settings Area
File Name
Enter the file name of the image to be saved. When you save a file, the date and four digits are
appended to the set file name in the "_20XX0101_0001" format.
Note
When you select the Save to a subfolder with current date checkbox, the date and four digits
are appended to the set file name.
Save in
Displays the folder in which to save the scanned images. To add a folder, select Add... from the pull-
down menu, then click Add in the displayed Select Destination Folder dialog box and specify the
destination folder.
The default save folders are as follows.
Windows 10/Windows 8.1/Windows Vista:
Documents folder
Windows 8/Windows 7:
My Documents folder
Data Format
Auto is selected. The following data formats are automatically applied according to the item type
when saving.
Photos, postcards, BD/DVD/CD, and business cards: JPEG
Magazines, newspapers, and documents: PDF
Important
The save format may differ depending on how you place the item.
Refer to "Positioning Originals (Scanning from Computer)" for how to place items.
JPEG Image Quality
You can specify the image quality of JPEG files.
PDF Compression
Select the compression type for saving PDF files.
Standard
It is recommended that you normally select this setting.
338
High
Compresses the file size when saving, allowing you to reduce the load on your network/server.
Create a PDF file that supports keyword search
Select this checkbox to convert text in images into text data and create PDF files that support
keyword search.
Note
PDF files that are searchable in the language selected in Document Language on the
(General Settings) tab of the Settings dialog box are created.
Save to a subfolder with current date
Select this checkbox to create a current date folder in the folder specified in Save in and save
scanned images in it. The folder will be created with a name such as "20XX_01_01"
(Year_Month_Date).
If this checkbox is not selected, files are saved directly in the folder specified in Save in.
(3) Application Settings Area
Open with an application
Select this when you want to enhance or correct the scanned images.
You can specify the application from the pull-down menu.
Send to an application
Select this when you want to use the scanned images as they are in an application that allows you to
browse or organize images.
You can specify the application from the pull-down menu.
Send to a folder
Select this when you also want to save the scanned images to a folder other than the one specified in
Save in.
You can specify the folder from the pull-down menu.
Do not start any application
Saves to the folder specified in Save in.
Note
To add an application or folder to the pull-down menu, select Add... from the pull-down menu, then
click Add in the displayed Select Application or Select Destination Folder dialog box and specify
the application or folder.
Instructions
Opens this guide.
Defaults
You can restore the settings in the displayed screen to the default settings.
339
Settings (General Settings) Dialog Box
Click the (General Settings) tab to display the Settings (General Settings) dialog box.
In the Settings (General Settings) dialog box, you can set the product to use, file size restriction on e-mail
attachment, language to detect text in images, and folder in which to save images temporarily.
Important
When the Settings dialog box is displayed from My Image Garden, some options may not appear.
Product Name
Displays the name of the product that IJ Scan Utility is currently set to use.
If the displayed product is not the one you want to use, select the desired product from the list.
In addition, for network connection, select one with "Network" after the product name.
Note
With network connection, Select appears on the right side of the product name. Click Select to
display IJ Network Scanner Selector EX from which you can change the scanner to use. Refer to
"Network Scan Settings" for the setting procedure.
E-mail Attachment Size
You can restrict the size of scanned images to be attached to an e-mail.
You can select Small (Suitable for 640 x 480 Windows), Medium (Suitable for 800 x 600 Windows),
Large (Suitable for 1024 x 768 Windows), or No Change.
Document Language
You can select the language for detecting text in images and for use with search when a PDF file that
supports keyword search is created.
340
Folder to Save Temporary Files
Displays the folder in which to save images temporarily. Click Browse... to specify the destination
folder.
Instructions
Opens this guide.
Defaults
You can restore the settings in the displayed screen to the default settings.
341
Scanning Using Application Software (ScanGear)
What Is ScanGear (Scanner Driver)?
Starting ScanGear (Scanner Driver)
Scanning in Basic Mode
Scanning in Advanced Mode
Scanning Multiple Documents from the ADF (Auto Document Feeder) in
Advanced Mode
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
ScanGear (Scanner Driver) Screens
Positioning Originals (Scanning from Computer)
General Notes (Scanner Driver)
Important
Available functions and settings vary depending on your scanner or printer.
342
What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. Use the software to specify the
output size, image corrections, and other settings.
ScanGear can be started from IJ Scan Utility or applications that are compatible with the standard TWAIN
interface. (ScanGear is a TWAIN-compatible driver.)
Features
Specify the document type, output size, and other settings when scanning documents and preview scan
results. Make various correction settings or finely adjust the brightness, contrast, and other parameters to
scan in a specific color tone.
Screens
There are two modes: Basic Mode and Advanced Mode.
Switch modes with the tabs on the upper right of the screen.
Note
ScanGear starts in the last used mode.
Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode tab to scan easily by following three simple on-screen steps (
, , and
).
343
Advanced Mode
Use the Advanced Mode tab to scan by specifying the color mode, output resolution, image brightness,
color tone, and other settings.
344
Starting ScanGear (Scanner Driver)
Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. Start
ScanGear from IJ Scan Utility or other applications.
Note
If you have more than one scanner or have a network compatible model and changed the connection
from USB connection to network connection, set up the network environment.
Starting from IJ Scan Utility
1.
Start IJ Scan Utility.
For details search for "Starting IJ Scan Utility" from the top page of the Online Manual for your model.
2.
In IJ Scan Utility main screen, click ScanGear.
The ScanGear screen appears.
Starting from Application
The procedure varies depending on the application. For details, see the application's manual.
1.
Start application.
2.
On application's menu, select machine.
Note
A machine connected over a network, will have "Network" displayed after the product name.
3.
Scan document.
The ScanGear screen appears.
345
Scanning in Basic Mode
Use the Basic Mode tab to scan easily by following these simple on-screen steps.
To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time
with ScanGear (Scanner Driver).
When scanning from the ADF (Auto Document Feeder), preview is not available.
Important
The following types of documents may not be scanned correctly. In that case, click (Thumbnail) on
the Toolbar to switch to whole image view and scan.
Photos with a whitish background
Documents printed on white paper, hand-written text, business cards, and other unclear documents
Thin documents
Thick documents
The following types of documents cannot be scanned correctly.
Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to irregular shapes
Note
Both sides of a two sided document can be scanned simultaneously on models with ADF duplex
scanning support.
1.
Place document on machine's Platen or ADF, and then start ScanGear (scanner driver).
Positioning Originals (Scanning from Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source to match your document.
346
Important
Some applications do not support continuous scanning from the ADF. For details, see the
application's manual.
Note
To scan magazines containing many color photos, select Magazine (Color).
3.
Click Preview.
Preview image appears in the Preview area.
Important
Preview is not available when scanning from the ADF.
Note
Colors are adjusted based on the document type selected in Select Source.
4.
Set Destination.
Note
Skip ahead to Step 7 if an ADF option is selected in Select Source.
5. Set Output Size.
Output size options vary with the selected Destination.
6. Adjust cropping frames (scan areas) as needed.
Adjust the size and position of the cropping frames on the preview image.
Adjusting Cropping Frames (ScanGear)
347
7. Set Image corrections as needed.
8. Click Scan.
Scanning starts.
Note
Click (Information) to display a dialog box showing the document type and other details of the
current scan settings.
How ScanGear behaves after scanning is complete can be set from Status of ScanGear dialog after
scanning on the Scan tab of the Preferences dialog box.
Related Topic
Basic Mode Tab
348
ScanGear (Scanner Driver) Screens
Basic Mode Tab
Advanced Mode Tab
349
Basic Mode Tab
Use the Basic Mode tab to scan easily by following these simple on-screen steps.
This section describes the settings and functions available on the Basic Mode tab.
(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area
Note
The displayed items vary by document type and view.
Preview is not available when scanning from the ADF (Auto Document Feeder).
(1) Settings and Operation Buttons
Select Source
Photo (Color)
Scan color photos.
Magazine (Color)
Scan color magazines.
Document (Color)
Scan documents in color.
Document (Grayscale)
Scan documents in black and white.
Document (Color) ADF Simplex
Scan documents from the ADF in color.
Document (Grayscale) ADF Simplex
Scan documents from the ADF in black and white.
Document (Color) ADF Duplex (only for models supporting ADF duplex scanning)
Scan both sides of documents from the ADF in color.
350
Document (Grayscale) ADF Duplex (only for models supporting ADF duplex scanning)
Scan both sides of documents from the ADF in black and white.
Important
Some applications do not support continuous scanning from the ADF. For details, see the
application's manual.
Note
When you select a document type, the unsharp mask function will be active.
When you select an option other than the ADF types, the image adjustment function which
adjusts images based on the document type will also be active.
When you select Magazine (Color), the descreen function will be active.
Display Preview Image
Preview
Performs a trial scan.
Note
When using the machine for the first time, scanner calibration starts automatically. Wait a
while until the preview image appears.
Destination
Select what you want to do with the scanned image.
Print
Select this to print the scanned image on a printer.
Image display
Select this to view the scanned image on a monitor.
OCR
Select this to use the scanned image with OCR software.
"OCR software" is software that converts text scanned as an image into text data that can be
edited in word processors and other programs.
351
Output Size
Select an output size.
Output size options vary by the item selected in Destination.
Flexible
Adjust the cropping frames (scan areas) freely.
In thumbnail view:
Drag the mouse over a thumbnail to display a cropping frame. When a cropping frame is
displayed, the portion within the cropping frame will be scanned. When no cropping frame is
displayed, each frame is scanned individually.
In whole image view:
When no cropping frame is displayed, the entire Preview area will be scanned. When a cropping
frame is displayed, the portion within the cropping frame will be scanned.
Paper Size (such as L or A4)
Select an output paper size. The portion within the cropping frame will be scanned at the size of
the selected paper size. Drag the cropping frame to enlarge/reduce it while maintaining the
aspect ratio.
Monitor Size (such as 1024 x 768 pixels)
Select an output size in pixels. A cropping frame of the selected monitor size will appear and the
portion within the cropping frame will be scanned. Drag the cropping frame to enlarge/reduce it
while maintaining the aspect ratio.
Add/Delete...
Displays the Add/Delete the Output Size dialog box for specifying custom output sizes. This
option can be selected when Destination is Print or Image display.
In the Add/Delete the Output Size dialog box, multiple output sizes can be specified and then
saved at one time. Saved items will be registered to the Output Size list and can be selected,
along with the predefined items.
Adding:
Enter Output Size Name, Width, and Height, and then click Add. For Unit, select inches or
mm if Destination is Print; if it is Image display, only pixels can be selected. The name of the
added size appears in Output Size List. Click Save to save the items listed in Output Size List.
Deleting:
Select the output size you want to delete in Output Size List, and then click Delete. Click Save
to save the items listed in Output Size List.
352
Important
Predefined output sizes such as A4 and 1024 x 768 pixels cannot be deleted.
Note
Save up to 10 items.
An error message appears when you enter a value outside the setting range. Enter a value
within the setting range.
Note
For details on whether or how the cropping frame initially appears on a preview image, see
Cropping Frame on Previewed Images in Preview Tab of the Preferences dialog box.
Invert aspect ratio
Available when Output Size is set to anything but Flexible.
Click this button to rotate the cropping frame. Click again to return it to the original orientation.
Adjust cropping frames
Adjust the scan area within the Preview area.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area
is specified, only the portion in the cropping frame will be scanned.
Adjusting Cropping Frames (ScanGear)
Image corrections
Correct the image to be scanned.
Important
Apply Auto Document Fix and Correct fading are available when Recommended is selected
on the Color Settings tab of the Preferences dialog box.
Note
Available functions vary by the document type selected in Select Source.
Apply Auto Document Fix
Sharpens text in a document or magazine for better readability.
Important
Scanning may take longer than usual when this checkbox is selected.
The color tone may change from the source image due to corrections. In that case, deselect
the checkbox and scan.
Correction may not be applied properly if the scan area is too small.
Correct fading
Corrects photos that have faded with time or have a colorcast.
Reduce gutter shadow
Corrects shadows that appear between pages when scanning open booklets.
353
Important
Be sure to see Gutter Shadow Correction for precautions and other information on using this
function.
Color Pattern...
Adjust the image's overall color. Correct colors that have faded due to colorcast or other reasons
and reproduce natural colors while previewing color changes.
Adjusting Colors Using a Color Pattern
Important
This setting is not available when Color Matching is selected on the Color Settings tab of
the Preferences dialog box.
Perform Scan
Scan
Starts scanning.
Note
When scanning starts, the progress appears. To cancel the scan, click Cancel.
Preferences...
Displays the Preferences dialog box for making scan/preview settings.
Close
Closes ScanGear (scanner driver).
(2) Toolbar
Adjust or rotate preview images. The buttons displayed on the Toolbar vary by view.
In thumbnail view:
In whole image view:
(Thumbnail) / (Whole Image)
Switches the view in the Preview area.
(3) Preview Area
(Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
The result will be reflected in the scanned image.
The image returns to its original state when you preview again.
354
(Rotate Right)
Rotates the preview image 90 degrees clockwise.
The result will be reflected in the scanned image.
The image returns to its original state when you preview again.
(Auto Crop)
Displays and adjusts the cropping frame automatically to the size of the document displayed in the
Preview area. The scan area is reduced every time you click this button if there are croppable areas
within the cropping frame.
(Check All Frames)
Available when two or more frames are displayed.
Selects the checkboxes of the images in thumbnail view.
(Uncheck All Frames)
Available when two or more frames are displayed.
Deselects the checkboxes of the images in thumbnail view.
(Select All Frames)
Available when two or more frames are displayed.
Selects the images in thumbnail view and outlines them in blue.
(Select All Cropping Frames)
Available when two or more cropping frames are specified.
Turns the cropping frames into thick broken lines and applies the settings to all of them.
(Remove Cropping Frame)
Removes the selected cropping frame.
(Information)
Displays the version of ScanGear, along with the document type and other details of the current scan
settings.
(Open Guide)
Opens this page.
(3) Preview Area
This is where a trial image appears after you click Preview. The results of image corrections, color
adjustments, and other settings made in
(1) Settings and Operation Buttons are also reflected.
355
When (Thumbnail) is displayed on Toolbar:
Cropping frames are specified according to the document size, and thumbnails of scanned images
appear. Only the images with the checkbox selected will be scanned.
Note
When multiple images are previewed, different outlines indicate different selection status.
Focus Frame (thick blue outline): The displayed settings will be applied.
Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected
Frames simultaneously. To select multiple images, click them while pressing the Ctrl key.
Unselected (no outline): The settings will not be applied.
Double-click a frame to enlarge the image. Click (Frame Advance) at the bottom of the
screen to display the previous or next frame. Double-click the enlarged frame again to return it to its
original state.
When (Whole Image) is displayed on Toolbar:
Items on the Platen are scanned and appear as a single image. All portions in the cropping frames will be
scanned.
356
Note
Create cropping frame(s) on the displayed image. In thumbnail view, one cropping frame can be
created per image. In whole image view, multiple cropping frames can be created.
Adjusting Cropping Frames (ScanGear)
Related Topic
Scanning in Basic Mode
357
Advanced Mode Tab
This mode allows you to make advanced scan settings such as the color mode, output resolution, image
brightness, and color tone.
This section describes the settings and functions available on the Advanced Mode tab.
(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area
Note
The displayed items vary by document type and view.
The preview function is not available when scanning from the ADF (Auto Document Feeder).
(1) Settings and Operation Buttons
Favorite Settings
You can name and save a group of settings (Input Settings, Output Settings, Image Settings, and
Color Adjustment Buttons) on the Advanced Mode tab, and load it as required. It is convenient to
save a group of settings if you will be using it repeatedly. You can also use this to reload the default
settings.
Select Add/Delete... from the pull-down menu to open the Add/Delete Favorite Settings dialog box.
358
Enter Setting Name and click Add; the name appears in Favorite Settings List.
When you click Save, the item appears in the Favorite Settings list and can be selected, along with
the predefined items.
To delete an item, select it in Favorite Settings List and click Delete. Click Save to save the settings
displayed in Favorite Settings List.
Note
You can set Add/Delete... in Favorite Settings after preview.
Save up to 10 items.
Input Settings
Specify the input settings such as the document type and size.
Output Settings
Specify the output settings such as the output resolution and size.
Image Settings
Enable/disable various image correction functions.
Color Adjustment Buttons
Fine corrections to the image brightness and color tones can be made including adjustments to the
image's overall brightness or contrast and adjustments to its highlight and shadow values (histogram)
or balance (tone curve).
Zoom
Zooms in on a frame, or zooms in on the image in the area specified with a cropping frame (scan
area). When zoomed in, Zoom changes to Undo. Click Undo to return the display to its non-
magnified state.
In thumbnail view:
When multiple images are displayed in thumbnail view, clicking this button zooms in on the selected
frame. Click (Frame Advance) at the bottom of the screen to display the previous or next
frame.
Note
You can also zoom in on an image by double-clicking the frame. Double-click the enlarged frame
again to return it to its original state.
In whole image view:
Rescans the image in the area specified with a cropping frame at higher magnification.
359
Note
Zoom rescans the document and displays high-resolution image in Preview.
(Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the
resolution of the displayed image will be low.
Preview
Performs a trial scan.
Scan
Starts scanning.
Note
When scanning starts, the progress appears. To cancel the scan, click Cancel.
When scanning is completed, a dialog box prompting you to select the next action may appear.
Follow the prompt to complete. For details, refer to Status of ScanGear dialog after scanning
in Scan Tab (Preferences dialog box).
It will take time to process the images if the total size of the scanned images exceeds a certain
size. In that case, a warning message appears; it is recommended that you reduce the total size.
To continue, scan in whole image view.
Preferences...
Displays the Preferences dialog box for making scan/preview settings.
Close
Closes ScanGear (scanner driver).
(2) Toolbar
Adjust or rotate preview images. The buttons displayed on the Toolbar vary by view.
360
In thumbnail view:
In whole image view:
(Thumbnail) / (Whole Image)
Switches the view in the Preview area.
(3) Preview Area
(Clear)
Deletes the preview image from the Preview area.
It also resets the Toolbar and color adjustment settings.
(Crop)
Allows you to specify the scan area by dragging the mouse.
(Move Image)
Allows you to drag the image until the part you want to see is displayed when an image enlarged in
the Preview area does not fit in the screen. You can also move the image using the scroll bars.
(Enlarge/Reduce)
Allows you to zoom in on the Preview area by clicking the image. Right-click the image to zoom out.
(Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
The result will be reflected in the scanned image.
The image returns to its original state when you preview again.
(Rotate Right)
Rotates the preview image 90 degrees clockwise.
The result will be reflected in the scanned image.
The image returns to its original state when you preview again.
(Auto Crop)
Displays and adjusts the cropping frame automatically to the size of the document displayed in the
Preview area. The scan area is reduced every time you click this button if there are croppable areas
within the cropping frame.
(Check All Frames)
Available when two or more frames are displayed.
Selects the checkboxes of the images in thumbnail view.
361
(Uncheck All Frames)
Available when two or more frames are displayed.
Deselects the checkboxes of the images in thumbnail view.
(Select All Frames)
Available when two or more frames are displayed.
Selects the images in thumbnail view and outlines them in blue.
(Select All Cropping Frames)
Available when two or more cropping frames are specified.
Turns the cropping frames into thick broken lines and applies the settings to all of them.
(Remove Cropping Frame)
Removes the selected cropping frame.
(Information)
Displays the version of ScanGear, along with the document type and other details of the current scan
settings.
(Open Guide)
Opens this page.
(3) Preview Area
This is where a trial image appears after you click Preview. The results of image corrections, color
adjustments, and other settings made in (1) Settings and Operation Buttons are also reflected.
When (Thumbnail) is displayed on Toolbar:
Cropping frames are specified according to the document size, and thumbnails of scanned images
appear. Only the images with the checkbox selected will be scanned.
362
Note
When multiple images are previewed, different outlines indicate different selection status.
Focus Frame (thick blue outline): The displayed settings will be applied.
Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected
Frames simultaneously. To select multiple images, click them while pressing the Ctrl key.
Unselected (no outline): The settings will not be applied.
When (Whole Image) is displayed on Toolbar:
Items on the Platen are scanned and appear as a single image. All portions in the cropping frames will be
scanned.
Note
Create cropping frame(s) on the displayed image. In thumbnail view, one cropping frame can be
created per image. In whole image view, multiple cropping frames can be created.
Adjusting Cropping Frames (ScanGear)
Related Topic
Scanning in Advanced Mode
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
363
General Notes (Scanner Driver)
ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it.
Scanner Driver Restrictions
When using the NTFS file system, the TWAIN data source may not be invoked. This is because the
TWAIN module cannot be written to the winnt folder for security reasons. Contact the computer's
administrator for help.
Some computers (including laptops) connected to the machine may not resume correctly from
standby mode. In that case, restart the computer.
Do not connect two or more scanners or multifunction printers with scanner function to the same
computer simultaneously. If multiple scanning devices are connected, you cannot scan from the
operation panel of the machine and also may experience errors while accessing the devices.
Scanning may fail if the computer has resumed from sleep or standby mode. In that case, follow these
steps and scan again.
1. Turn off the machine.
2. Exit ScanGear, then disconnect the USB cable from the computer and reconnect it.
3. Turn on the machine.
ScanGear cannot be opened in multiple applications at the same time. Within an application,
ScanGear cannot be opened for the second time when it is already open.
Be sure to close the ScanGear window before closing the application.
When using a network compatible model by connecting to a network, the machine cannot be
accessed from multiple computers at the same time.
When using a network compatible model by connecting to a network, scanning takes longer than
usual.
Make sure that you have adequate disk space available when scanning large images at high
resolutions. For example, at least 300 MB of free space is required to scan an A4 document at 600
dpi in full-color.
ScanGear and WIA driver cannot be used at the same time.
Do not enter the computer into sleep or hibernate state during scanning.
Applications with Restrictions on Use
Some applications may not display the TWAIN user interface. In that case, refer to the application's
manual and change the settings accordingly.
Some applications do not support continuous scanning of multiple documents. In some cases, only
the first scanned image is accepted, or multiple images are scanned as one image. For such
applications, do not scan multiple documents from the ADF (Auto Document Feeder).
To import scanned images into Microsoft Office 2000, first save them using IJ Scan Utility, then import
the saved files from the Insert menu.
When scanning Platen size images into Microsoft Office 2003 (Word, Excel, PowerPoint, etc.), click
Custom Insert in the Insert Picture from Scanner or Camera screen. Otherwise, images may not
be scanned correctly.
When scanning images into Microsoft Office 2007/Microsoft Office 2010 (Word, Excel, PowerPoint,
etc.), use Microsoft Clip Organizer.
364
Images may not be scanned correctly in some applications. In that case, increase the operating
system's virtual memory and retry.
When image size is too large (such as when scanning large images at high resolution), your computer
may not respond or the progress bar may remain at 0 % depending on the application. In that case,
cancel the action (for example by clicking Cancel on the progress bar), then increase the operating
system's virtual memory or reduce the image size/resolution and retry. Alternatively, scan the image
via IJ Scan Utility first, then save and import it into the application.
365
Positioning Originals (Scanning from Computer)
This section describes how to load originals on the platen for scanning. If items are not placed correctly they
may not be scanned correctly.
Important
Do not place objects on the document cover. When you open the document cover, the objects may fall
into your scanner or printer, resulting in malfunction.
Close the document cover when scanning.
Placing Items
Place items as described below to scan by detecting the item type and size automatically.
Important
When scanning by specifying the paper size in IJ Scan Utility or ScanGear (scanner driver), align an
upper corner of the item with the corner at the arrow (alignment mark) of the platen.
Photos that have been cut to irregular shapes and items smaller than 1.2 inches (3 cm) square
cannot be cropped accurately when scanning.
Reflective disc labels may not be scanned as expected.
Photos, Postcards, Business Cards, and BD/DVD/CD Magazines, Newspapers, and Documents
Single item:
Place the item face-down on the platen, with 0.4 inch (1 cm)
or more space between the edges (diagonally striped area) of
the platen and the item. Portions placed on the diagonally
striped area cannot be scanned.
Important
Large items (such as A4 size photos) that cannot be
placed away from the edges/arrow (alignment mark) of
the platen may be saved as PDF files. To save in a for-
mat other than PDF, scan by specifying the data format.
Place the item face-down on the platen and align an
upper corner of the item with the corner at the arrow
(alignment mark) of the platen. Portions placed on
the diagonally striped area cannot be scanned.
Important
For the portions in which items cannot be scan-
ned, see Loading Originals.
366
Multiple items:
Allow 0.4 inch (1 cm) or more space between the edges (di-
agonally striped area) of the platen and items, and between
items. Portions placed on the diagonally striped area cannot
be scanned.
0.4 inch (1 cm) or more
Note
Place up to 12 items.
Positions of slanted items (10 degrees or less) are cor-
rected automatically.
367
Network Scan Settings
You can connect your scanner or printer to a network to share it among multiple computers or scan images
into a specified computer.
Important
Multiple users cannot scan at the same time.
Note
Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or by
following the instructions our website.
With network connection, scanning takes longer than USB connection.
Complete the following settings to enable scanning over a network.
Specifying Your Scanner or Printer
Use IJ Network Scanner Selector EX to specify the scanner you want to use. By specifying the scanner,
you can scan over a network from your computer or the operation panel.
Important
If the product you want to use is changed with IJ Network Scanner Selector EX, the product used for
scanning with IJ Scan Utility changes as well. The product for scanning from the operation panel also
changes.
If your scanner or printer is not selected in IJ Scan Utility, check that it is selected with IJ Network
Scanner Selector EX.
Refer to "IJ Network Scanner Selector EX2 Menu and Setting Screen" for your model from Home of
the Online Manual for details.
To scan from the operation panel, specify your scanner or printer with IJ Network Scanner Selector
EX beforehand.
1.
Check that IJ Network Scanner Selector EX is running.
If IJ Network Scanner Selector EX is running, (IJ Network Scanner Selector EX2) appears in the
notification area on the desktop. Click to check the hidden icons as well.
Note
If the icon is not displayed in the notification area on the desktop, follow the procedure below to
start.
Windows 10:
From the Start menu, click All apps > Canon Utilities > IJ Network Scanner Selector
EX2.
Windows 8.1/Windows 8:
Click IJ Network Scanner Selector EX2 on the Start screen.
368
If IJ Network Scanner Selector EX2 is not displayed on the Start screen, select the
Search charm, then search for "IJ Network Scanner Selector EX".
Windows 7/Windows Vista:
From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner
Selector EX2 > IJ Network Scanner Selector EX2.
The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen
appears. In that case, skip ahead to Step 3.
2.
In the notification area on the desktop, right-click (IJ Network Scanner Selector EX2),
then select Settings....
The Scan-from-PC Settings screen appears.
3.
Select your scanner or printer from Scanners.
Normally, the MAC address of your scanner or printer is already selected after the network setup. In
that case, you do not need to select it again.
Important
If multiple scanners exist on the network, multiple model names appear. In that case, you can
select one scanner per model.
4.
Click OK.
Note
The scanner selected in the Scan-from-PC Settings screen will be automatically selected in the Scan-
from-Operation-Panel Settings screen as well.
Setting for Scanning with IJ Scan Utility
To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or
printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status
between it and the computer.
1. Start IJ Scan Utility.
2. Select "Canon XXX series Network" (where "XXX" is the model name) for Product
Name.
3. Click Settings... to use another scanner connected to a network.
4. Click (General Settings), then click Select in Product Name.
The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
369
Select the scanner you want to use and click OK.
5. In the Settings (General Settings) dialog box, click OK.
The IJ Scan Utility main screen reappears. You can scan via a network connection.
Setting for Scanning from the Operation Panel
You can make the setting for scanning from the operation panel.
Important
Set IJ Scan Utility to use your scanner or printer via a network connection beforehand.
Setting for Scanning with IJ Scan Utility
1.
Check that IJ Network Scanner Selector EX is running.
If IJ Network Scanner Selector EX is running, (IJ Network Scanner Selector EX2) appears in the
notification area on the desktop. Click
to check the hidden icons as well.
Note
If the icon is not displayed in the notification area on the desktop, follow the procedure below to
start.
Windows 10:
From the Start menu, click All apps > Canon Utilities > IJ Network Scanner Selector
EX2.
Windows 8.1/Windows 8:
Click IJ Network Scanner Selector EX2 on the Start screen.
If IJ Network Scanner Selector EX2 is not displayed on the Start screen, select the
Search charm, then search for "IJ Network Scanner Selector EX".
Windows 7/Windows Vista:
From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner
Selector EX2 > IJ Network Scanner Selector EX2.
The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen
appears. In that case, skip ahead to Step 3.
2. In the notification area on the desktop, right-click (IJ Network Scanner Selector EX2),
then select Settings....
The Scan-from-PC Settings screen appears.
3. Click Scan-from-Operation-Panel Settings.
The Scan-from-Operation-Panel Settings screen appears.
370
4. Select your scanner or printer from Scanners and click OK.
Select the MAC address of your scanner or printer.
Note
When multiple scanners are connected via a network, you can select up to three scanners.
5. In the Scan-from-PC Settings screen, click OK.
Note
If your scanner or printer does not appear, check the following, click OK to close the screen, then
reopen it and try selecting again.
MP Drivers is installed
Network settings of your scanner or printer is completed after installing the MP Drivers
Network communication between your scanner or printer and computer is enabled
If the problem is still not solved, see Network Communication Problems.
371
Scanning from Operation Panel
Forwarding Scanned Data to Computer Using Operation Panel Basics
Sending Scanned Data as E-Mail from Computer
Setting Items for Scanning Using Operation Panel
Setting Up Operation Panel with IJ Scan Utility (Windows)
Setting Up Operation Panel with IJ Scan Utility (Mac OS)
372
Forwarding Scanned Data to Computer Using Operation Panel
Before forwarding scanned data to the computer, check the following:
MP Drivers are installed. (Windows)
If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from the
Canon website.
The scanner driver is installed. (Mac OS)
If the scanner driver is not yet installed, install the scanner driver from the Canon website.
The printer is connected to a computer correctly.
Make sure the printer is connected to the computer correctly.
Do not plug in or unplug the USB cable while the printer is in operation, or when the computer is in the
sleep or standby mode.
If you perform scanning via a network connection, make sure all the required settings have been
specified.
For Windows:
Network Scan Settings
For Mac OS:
Network Scan Settings
The destination and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For more on settings of
Canon IJ Scan Utility:
For Windows:
Settings Dialog Box
For Mac OS:
Settings Dialog
For Mac OS X 10.11, starting Canon IJ Scan Utility is required to forward the scanned data to your
computer.
Follow the procedure below to forward scanned data to the computer.
1. Make sure printer is turned on.
2.
Select Scan on the HOME screen.
Using the Operation Panel
The screen for selecting to which you save the data is displayed.
373
3.
Select Save to computer.
4.
Select a computer to forward scanned data.
Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data
for a network-connected computer.
The Scan standby screen is displayed.
Note
When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows), select Enable for WSD scan from this device on WSD setting on
Common settings in LAN settings under Device settings.
WSD setting
If you select Search again, the printer starts searching for the connected computers again.
The destination and the file name are specified in Canon IJ Scan Utility in advance.
For Windows:
Settings Dialog Box
For Mac OS:
Settings Dialog
5. Specify settings as necessary.
374
A. Select the document type.
Note
When you forward the scanned data to the computer searched using WSD, you cannot select
the document type.
Auto scan
The printer detects the type of the originals automatically and the image is forwarded in the
optimized size, resolution and data format.
Important
Load originals properly according to their type; otherwise, some originals may not be
scanned properly.
For more on loading the original:
Loading Originals
The following items can be scanned:
Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs
The following items cannot be scanned properly.
A4 sized photos
Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a
paperback with its backbone cut off
Originals on thin white paper
Long and narrow originals such as panoramic photographs
Document
Scans the original on the platen glass as a document data applying the settings specified in
Scan settings.
Photo
Scans the original on the platen glass as a photo data applying the settings specified in Scan
settings.
B.
Displays Scan settings screen.
For more on the setting items:
375
Setting Items for Scanning Using Operation Panel
C. Displays how to load the original.
D.
Displays the screen to select the destination.
6. Load original on platen glass.
7.
Press Color button for color scanning, or Black button for black & white scanning.
Note
When you forward the scanned data to the computer using WSD, press the Color button.
If you select JPEG or TIFF for Format on the scan setting screen:
The printer starts scanning and scanned data is forwarded to the computer.
When you select PDF or Compact PDF for Format on the scan setting screen:
The confirmation screen asking you if you continue scanning is displayed after scanning is
complete.
If you continue scanning, load the original on the platen glass and start scanning.
If you do not continue scanning, tap End. The scanned data is forwarded to the computer.
Scanned data is forwarded to the computer according to the settings specified in Canon IJ Scan Utility.
Remove the original on the platen glass after scanning is complete.
Important
If the scanning result with Auto scan is not satisfactory, select the document type or size
according to the original in step 5.
If program selection screen appears (Windows):
The program selection screen may be displayed after pressing the Color or Black button. In this case,
select Canon IJ Scan Utility and click OK.
376
If you want to scan originals with advanced settings, or if you want to edit
or print scanned images:
If you scan originals from a computer using My Image Garden, My Image Garden enables you to edit the
scanned images, such as optimizing or trimming.
In addition, you can edit or print the scanned images using the compatible application software to make
better use of them.
For Windows:
Scanning Photos and Documents
For Mac OS:
Scanning Photos and Documents
Note
For Windows:
You can use a WIA-compliant application software to scan originals with this printer.
For details:
Other Scanning Methods
If you want to convert a scanned document to text:
Extracting Text from Scanned Images (OCR)
377
Setting Items for Scanning Using Operation Panel
You can change the scan settings such as the scan size, resolution, or data format.
When the Scan standby screen is displayed, tap Settings to select the setting item. Flick to display setting
items and tap the setting item to display the settings. Tap to specify the setting.
Note
The scan setting cannot be specified under the following conditions:
When Auto scan is selected for Doc.type to forward the scanned data to the computer
When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows)
Some settings cannot be specified in combination with the setting of other setting item, the document
type selected for Doc.type, or the scan menu on the screen for selecting to which you save the data. If
the setting which cannot be specified in combination is selected, and Error details are displayed on
the touch screen. In this case, tap on the upper left on the touch screen to check the message and
change the setting.
The specified scan settings such as the scan size, resolution, and data format are retained even if the
printer is turned off.
When scanning starts in the scan menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the touch screen. Change the setting,
following the on-screen instructions.
When you forward the scanned data to the computer or attach the data to an e-mail, you can specify
the destination and file name using Canon IJ Scan Utility.
For Windows:
Settings Dialog Box
For Mac OS:
Settings Dialog
If you scan originals from the computer, you can scan with advanced settings. For more on scanning
from the computer:
For Windows:
Scanning Photos and Documents
For Mac OS:
378
Scanning Photos and Documents
You can specify the following setting items.
Scan size
Select the size of the original.
Format
Select the data format of the scanned data.
Scan res (Scan resolution)
Select the resolution for scanning.
Reduce show-thru (Reducing show-through)
Characters on the back may show through when scanning a thin document such as a newspaper. Select
ON if characters seem to show through on the scanned document.
This setting item is not available when Photo is selected for Doc.type.
Descreen
A printout consists of minute dots to make characters or graphs. Interfering with each dot may result in
uneven shades or a striped pattern. Select ON if you notice any uneven shades or a striped pattern on
the scanned image.
This setting item is not available when Photo is selected for Doc.type.
Note
Even if ON is selected for this setting, some moire effects may remain if Unsharp mask is set to
ON. In that case, select OFF for Unsharp mask.
Unsharp mask
The outline of small characters or thin objects such as a hair or leaves on a photo can be accentuated.
Select ON if you want to accentuate the outline of the scanned data.
379
Network
Cannot Find Printer on Network
Cannot Find Printer while Using Wireless LAN
Network Key Unknown
For other questions about network, click here.
Print
Printing Does Not Start
Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear
Print Results Are Unsatisfactory
Paper Jams
Error
Installation
Cannot Install MP Drivers
An Error Occurs
Message Appears
Frequently Asked Questions
Examples of Problems
Printer Does Not Move
Power Does Not Come On
Power Shuts Off By Itself
Display on Touch Screen Is Off
Touch Screen Shows Wrong Language
USB Connection Problems
Cannot Communicate with Printer via USB
Printing Does Not Start
Copying/Printing Stops
Cannot Print Using AirPrint
Printing Is Slow
No Ink Comes Out
Paper Jams
Paper Does Not Feed Properly/"No Paper" Error
Cannot Print on Disc Label
Automatic Duplex Printing Problems
Print Results Are Unsatisfactory
Scanning Problems (Windows)
380
Scanning Problems (Mac OS)
Scan Results Are Unsatisfactory (Windows)
Scan Results Are Unsatisfactory (Mac OS)
Cannot Print/Scan from Smartphone/Tablet
Cannot Set Correctly (Network)
Cannot Find Printer on Check Printer Settings Screen
Cannot Find Printer while Using Wireless LAN
Cannot Find Printer while Using Wired LAN
Printer Suddenly Cannot Be Used
Network Key Unknown
Administrator Password Set for Printer Unknown
Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings
Message Appears on Computer During Setup
Checking Network Information
Restoring to Factory Defaults
Cannot Set Correctly (Installation)
Cannot Install MP Drivers
Easy-WebPrint EX Does Not Start or Easy-WebPrint EX Menu Does Not Appear (Windows)
Updating Printer Driver in Network Environment (Windows)
Error or Message Appears
An Error Occurs
Message Appears
List of Support Code for Error
Error Message Appears on PictBridge (Wireless LAN) Compliant Device
IJ Scan Utility Error Messages (Windows)
ScanGear (Scanner Driver) Error Messages
IJ Scan Utility Error Messages (Mac OS)
Scanner Driver (ICA Driver) Error Messages (Mac OS)
Operation Problems
Network Communication Problems
Printing Problems
Problems while Printing/Scanning from Smartphone/Tablet
Scanning Problems (Windows)
Scanning Problems (Mac OS)
Mechanical Problems
Installation and Download Problems
Errors and Messages
If You Cannot Solve a Problem
381
Network Settings and Common Problems
Here are frequently asked questions on network. Select a connection method you are using, or you want to
use.
Wireless LAN
Wireless Direct
Wired LAN
Wireless LAN
Cannot Find Printer
Cannot Find Printer while Using Wireless LAN
Cannot Find Printer on Check Printer Settings Screen
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Cannot Find Printer after Searching it on Printer Detection Screen During Setup
Searching Printer by IP Address or Host Name During Setup
Error Occurs During Wireless LAN Setup
Another Printer Found with Same Name
Changing LAN Connection Method/Changing Wireless LAN Connection Method
Cannot Print or Connect
Printer Suddenly Cannot Be Used
Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings
Cannot Access to Internet on Wireless LAN from Communication Device
Connecting Printer and Wireless Router Using Easy wireless connect
Cannot Connect Smartphone/Tablet to Wireless Router
Error Occurs During Wireless LAN Setup
Connecting to Another Computer via LAN/Changing from USB to LAN Connection
LAN Setting Tips/Changing LAN Settings
Network Key Unknown
Administrator Password Set for Printer Unknown
Checking Network Information
Restoring to Factory Defaults
Checking Wireless Router SSID/Key
Checking Wireless Router SSID for Smartphone/Tablet
Privacy Separator/SSID Separator/Network Separation function
Default Network Settings
Connecting to Another Computer via LAN/Changing from USB to LAN Connection
Printing Network Settings
Changing LAN Connection Method/Changing Wireless LAN Connection Method
Printing/Scanning from Smartphone/Tablet
Connecting Printer and Wireless Router Using Easy wireless connect
382
Cannot Connect Smartphone/Tablet to Wireless Router
Checking Wireless Router SSID for Smartphone/Tablet
Setting Up Using Smartphone/Tablet
Cannot Print/Scan from Smartphone/Tablet
Downloading Canon PRINT Inkjet/SELPHY
Problems while Using Printer
Message Appears on Computer During Setup
Printing Is Slow
Ink Level Not Shown on Printer Status Monitor (Windows)
Packets Are Sent Constantly (Windows)
Wireless Direct
Cannot Print or Connect
Printer Suddenly Cannot Be Used
Cannot Access to Internet on Wireless LAN from Communication Device
LAN Setting Tips/Changing LAN Settings
Network Key Unknown
Administrator Password Set for Printer Unknown
Checking Network Information
Restoring to Factory Defaults
Printing Network Settings
Default Network Settings
Changing LAN Connection Method/Changing Wireless LAN Connection Method
Printing/Scanning from Smartphone/Tablet
Cannot Print/Scan from Smartphone/Tablet
Downloading Canon PRINT Inkjet/SELPHY
Problems while Using Printer
Message Appears on Computer During Setup
Printing Is Slow
Ink Level Not Shown on Printer Status Monitor (Windows)
Wired LAN
Cannot Find Printer
Cannot Find Printer after Searching it on Printer Detection Screen During Setup
Searching Printer by IP Address or Host Name During Setup
Cannot Find Printer while Using Wired LAN
Another Printer Found with Same Name
Cannot Print or Connect
Printer Suddenly Cannot Be Used
LAN Setting Tips/Changing LAN Settings
Administrator Password Set for Printer Unknown
Checking Network Information
383
Restoring to Factory Defaults
Default Network Settings
Connecting to Another Computer via LAN/Changing from USB to LAN Connection
Printing Network Settings
Changing LAN Connection Method/Changing Wireless LAN Connection Method
Problems while Using Printer
Message Appears on Computer During Setup
Printing Is Slow
Ink Level Not Shown on Printer Status Monitor (Windows)
Packets Are Sent Constantly (Windows)
384
Connecting the Printer to a Network
Available Connection Methods
The following connection methods are available on the printer.
Wireless Connection
Connect the printer and computer/smartphone/tablet using a wireless router.
If you have a wireless router, we recommend you use one for wireless connection.
Wireless Direct
Connect the printer and computer/smartphone/tablet without using a wireless router.
Wired Connection
Connect the printer and hub/router using a LAN cable. Prepare a LAN cable.
For more on connection method, see Available Connection Methods.
Note
You can connect the printer and computer using a USB cable (USB connection). Prepare a
USB cable. For details, see Connecting to Another Computer via LAN/Changing from USB to
LAN Connection.
Network Connection Settings/Setup
Perform connection setup for the printer and computer/smartphone/tablet.
For more on setup procedure, click here.
Changing Network Settings
See below for changing connection settings for the printer and computer/smartphone/tablet.
To change network connection method:
Changing LAN Connection Method/Changing Wireless LAN Connection Method
Changing the Connection Mode
To add computer/smartphone/tablet to the printer:
Connecting to Another Computer via LAN/Changing from USB to LAN Connection
To use wireless direct temporarily:
385
Using Printer with Wireless Direct
Application Software for Network (Windows)
For Windows, you can use IJ Network Device Setup Utility to perform network settings. It allows a network/
printer administrator to manage printers on network.
Network Settings (IJ Network Device Setup Utility) (Windows)
Troubleshooting
See Network Settings and Common Problems for troubleshooting on network connection.
Notice/Restriction
See below for details.
Restrictions on network settings:
Restrictions
Notices when printing using web service:
Notice for Web Service Printing
386
Restrictions
When connecting another device while a device (such as a smartphone) is already connected to the printer,
connect it using the same connection method as the connected device.
If you connect using a different connection method, the connection to the device in use will be disabled.
Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.
Connect via wireless router
You cannot establish a printer with wireless and wired connections at the same time.
Make sure your device and the wireless router are connected. For details on checking these settings,
see the manual supplied with the wireless router or contact its manufacturer.
As for a device already connected to the printer without using a wireless router, reconnect it via a
wireless router.
Configuration, router functions, setup procedures and security settings of network devices vary
depending on the system environment. For details, see the manual for your network device or contact
its manufacturer.
This printer does not support IEEE802.11ac, IEEE802.11a, or IEEE802.11n (5 GHz). Check if your
device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.
If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security
protocol. Change the security protocol for your device to something other than WEP and TKIP or
change the setting to something other than "IEEE802.11n only."
The connection between your device and the wireless router will be temporarily disabled while the
setting is changed. Do not proceed to the next screen of this guide until setup is complete.
For office use, consult your network administrator.
Note that if you connect to a network with no security protection, your personal information could be
disclosed to a third party.
Wireless Direct
Important
If a device is connected to the Internet via a wireless router, and you then connect it to a printer in
Wireless Direct mode, the existing connection between the device and wireless router will be
disabled. In that case, the connection of the device may switch to a mobile data connection
automatically depending on your device. When you connect to the Internet using a mobile data
connection, charges may apply depending on your contract.
When you connect a device and the printer using Wireless Direct, the connection information will
be saved to Wi-Fi settings. The device may be connected to the printer automatically even after
disconnecting it or connecting it to another wireless router.
To prevent automatic connection to the printer in Wireless Direct mode, change the connection
mode after using the printer, or set not to connect automatically in the Wi-Fi settings of the
device.
For details on checking or changing wireless router settings, see the router manual or contact its
manufacturer.
If you connect a device and the printer using Wireless Direct, Internet connection may become
unavailable depending on your environment. In that case, web services for the printer cannot be used.
387
In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a
sixth device while five devices are already connected, an error will appear.
If an error appears, disconnect a device that does not use the printer, then configure settings again.
Devices connected to the printer using Wireless Direct cannot communicate with each other.
Firmware updates for the printer are not available while using Wireless Direct.
When a device has been connected to the printer without using a wireless router and you want to set
it up again using the same connection method, disconnect it first. Disable the connection between the
device and printer in the Wi-Fi setting screen.
Connection Using a Wired Network
You cannot establish a printer with wireless and wired connections at the same time.
When using a router, connect the printer and a device to the LAN side (same network segment).
388
Network Communication Problems
Cannot Find Printer on Network
Network Connection Problems
Other Network Problems
389
Cannot Find Printer on Network
While performing printer setup:
Cannot Find Printer on Check Printer Settings Screen During Setup
(Windows)
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
While using printer:
Cannot Find Printer while Using Wireless LAN
Cannot Find Printer while Using Wired LAN
Note
You cannot use the wireless LAN and the wired LAN at the same time.
390
Cannot Find Printer on Check Printer Settings Screen During
Setup (Windows)
If the printer cannot be found and the Check Printer Settings screen appears after searching the printer by
Automatic search on the Search for Printers screen, click Redetect and search for the printer again by
the IP address on the Search for Printers screen.
If the printer has not been found after searching it by the IP address, check network settings.
When using wireless LAN:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Power Status
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking PC Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Printer's Wireless LAN Settings
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless LAN Environment
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Printer's IP Address
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Security Software Settings
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless Router Settings
When using wired LAN:
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking LAN Cable and Router
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking PC Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Printer's Wired LAN Settings
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Printer's IP Address
391
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Security Software Settings
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-
Checking Router Settings
392
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking Power Status
Are printer and network device (router, etc.) turned on?
Make sure the printer is turned on.
Confirming that the Power Is On
Make sure network device (router, etc.) is turned on.
If printer or network device is off:
Turn on printer or network device.
It may take a while for the printer and network device to become ready for use once they are turned on.
Wait a while after turning on the printer or network device, and then click Redetect on the Check Printer
Settings screen to redetect the printer.
If the printer is found, follow the instructions on the screen to continue to set up network communication.
If printer and network device are on:
If the network devices are on, turn them off and on again.
If above does not solve the problem:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking PC Network Connection
393
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking PC Network Connection
Can you view any web pages on your computer?
Make sure the computer and network device (router, etc.) are configured and the computer is connected
to the network.
If you cannot view any web pages:
Click Cancel on the Check Printer Settings screen to cancel to set up the network communication.
After that, configure the computer and network device.
For the procedures, refer to the instruction manuals supplied with the computer and network device, or
contact their manufacturers.
If you can view web pages after configuring the computer and network device, try to set up the network
communication from the beginning.
If above does not solve the problem:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless LAN Environment
394
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking Printer's Wireless LAN
Settings
Is printer set to allow wireless communication?
Make sure the or icon is displayed on the touch screen.
If icon is not displayed:
The printer is not set to allow wireless communication. Click Wireless LAN Setup Information on the
Check Printer Settings screen to check the status and turn on wireless communication on the printer.
If icon is displayed:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless LAN Environment
395
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking Wireless LAN
Environment
Is printer connected to wireless router?
Use the icon on the touch screen to make sure the printer is connected to the wireless router.
If icon is displayed:
Checking wireless router location
After checking the wireless router setting, make sure the printer is not placed far away from the
wireless router.
The printer can be up to 50 m (164 ft) from the wireless router indoors. Make sure the printer is close
enough to the wireless router to be used.
Place the wireless router and printer where there are no obstacles between them. Wireless
communication between different rooms or floors is generally poor. Wireless communication can be
impeded by building materials containing metal or concrete. If the printer cannot communicate with
the computer over a wireless LAN due to a wall, place the printer and the computer in the same room.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth
as a wireless router is nearby, it may cause interference. Place the wireless router as far away from
interference sources as possible.
Note
Though an antenna is attached to most wireless routers, note that some of them have it inside.
Checking wireless router settings
396
The printer and wireless router should be connected using 2.4 GHz bandwidth. Make sure the
wireless router for the printer's destination is configured to use 2.4 GHz bandwidth.
Important
Depending on the wireless router, note that different SSID is assigned for a bandwidth (2.4 GHz
or 5 GHz) or its usage (for PC or game machine) using alphanumeric characters at the end of
SSID.
Check the SSID of the wireless router for the printer on the touch screen.
Tap the icon on the lower left, tap Yes, and then check SSID.
For more on the wireless router, refer to the instruction manual supplied with the wireless router or
contact its manufacturer.
After taking measures above, click Redetect on the Check Printer Settings screen to redetect the
printer.
If the printer is found, follow the instructions on the screen to continue to set up network communication.
If the printer cannot be detected, the printer is not connected to the wireless router. Connect the printer to
the wireless router.
After connecting the printer to the wireless router, set up the network communication from the beginning.
If icon is displayed:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Printer's IP Address
397
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking Printer's IP Address
Is printer's IP address specified correctly?
If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's
IP address is not used for another device.
To check the printer's IP address, print out the network settings information or use the operation panel to
display it.
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
If the IP address is not specified correctly:
See If an error screen appears: and specify the IP address.
If the IP address is specified correctly:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Security Software Settings
398
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking Security Software
Settings
Disable block in firewall function temporarily.
The firewall of your security software or operation system for computer may limit communication between
the printer and your computer. Check the firewall setting of your security software or operation system or
the message shown on your computer and disable block temporarily.
If firewall interferes with setup:
If message appears:
If a message appears warning that Canon software is attempting to access the network, set the
security software to allow access.
After allowing the software to access, click Redetect on the Check Printer Settings screen to
redetect the printer.
If the printer is found, follow the instructions on the screen to continue to set up network
communication.
If no message appears:
Cancel the setup, and then set the security software to allow Canon software to access the network.
The file Setup.exe or Setup64.exe in the win > Driver > DrvSetup folder on the Setup CD-ROM
After setting the security software, redo the network communication setup from the beginning.
After setup is completed, enable firewall.
Note
For more on firewall settings of your operating system or security software, see instruction manual or
contact its manufacturer.
If above does not solve the problem:
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-
Checking Wireless Router Settings
399
Cannot Find Printer on Check Printer Settings Screen During
Wireless LAN Setup (Windows)-Checking Wireless Router Settings
Check wireless router settings.
Check wireless router network connection settings, such as IP address filtering, MAC address filtering,
encryption key, and DHCP function.
Make sure the same radio channel is assigned to the wireless router and the printer.
To check the settings of the wireless router, see the instruction manual supplied with the wireless router or
contact the manufacturer.
After checking the wireless router settings, click Redetect on the Check Printer Settings screen to
redetect the printer.
If the printer is found, follow the instructions on the screen to continue to set up network communication.
400
Cannot Find Printer on Check Printer Settings Screen During
Wired LAN Setup (Windows)-Checking LAN Cable and Router
Is LAN cable connected, and are printer and router on?
Make sure the LAN cable is connected.
Make sure the printer is turned on.
Confirming that the Power Is On
Make sure the router is turned on.
If LAN cable is connected and printer or network device is off:
Turn on printer or network device.
It may take a while for the printer and network device to become ready for use once they are turned on.
Wait a while after turning on the printer or network device, and then click Redetect on the Check Printer
Settings screen to redetect the printer.
If the printer is found, follow the instructions on the screen to continue to set up the network
communication.
If LAN cable is connected and printer and network device are on:
If the printer cannot not be found after trying to redetect it, even though the printer and the network device
are on:
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking
PC Network Connection
401
Cannot Find Printer on Check Printer Settings Screen During
Wired LAN Setup (Windows)-Checking PC Network Connection
Can you view any web pages on your computer?
Make sure the computer and network device (router, etc.) are configured and the computer is connected
to the network.
If you cannot view any web pages:
Click Cancel on the Check Printer Settings screen to cancel to set up the network communication.
After that, configure the computer and network device.
For the procedures, refer to the instruction manuals supplied with the computer and network device, or
contact their manufacturers.
If you can view web pages after configuring the computer and network device, try to set up the network
communication from the beginning.
If you can view web pages:
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking
Printer's Wired LAN Settings
402
Cannot Find Printer on Check Printer Settings Screen During
Wired LAN Setup (Windows)-Checking Printer's Wired LAN
Settings
Is printer set to allow wired communication?
Make sure the icon is displayed on the touch screen.
If icon is not displayed:
The printer is not set to allow wired communication. Turn on wired communication on the printer.
Once you have turned on wired communication, redo the network communication setup from the
beginning.
If icon is displayed:
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking
Printer's IP Address
403
Cannot Find Printer on Check Printer Settings Screen During
Wired LAN Setup (Windows)-Checking Printer's IP Address
Is printer's IP address specified correctly?
If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's
IP address is not used for another device.
To check the printer's IP Address, print out the network settings information or use the operation panel to
display it.
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
If the IP address is not specified correctly:
See If an error screen appears: and specify the IP address.
If the IP address is specified correctly:
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking
Security Software Settings
404
Cannot Find Printer on Check Printer Settings Screen During
Wired LAN Setup (Windows)-Checking Security Software Settings
Disable block in firewall function temporarily.
The firewall of your security software or operation system for computer may limit communication between
the printer and your computer. Check the firewall setting of your security software or operation system or
the message shown on your computer and disable block temporarily.
If firewall interferes with setup:
If message appears:
If a message appears warning that Canon software is attempting to access the network, set the
security software to allow access.
After allowing the software to access, click Redetect on the Check Printer Settings screen to
redetect the printer.
If the printer is found, follow the instructions on the screen to continue to set up the network
communication.
If no message appears:
Cancel the setup, and then set the security software to allow Canon software below to access the
network.
The file Setup.exe or Setup64.exe in the win > Driver > DrvSetup folder on the Setup CD-ROM
After setting the security software, redo the network communication setup from the beginning.
After setup is completed, enable firewall.
Note
For more on firewall settings of your operating system or security software, see instruction manual or
contact its manufacturer.
If above does not solve the problem:
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking
Router Settings
405
Cannot Find Printer on Check Printer Settings Screen During
Wired LAN Setup (Windows)-Checking Router Settings
Check router settings.
Check router network connection settings such as IP address filtering, MAC address filtering, and DHCP
function.
For more on checking the settings of the router, refer to the instruction manual supplied with the router or
contact its manufacturer.
After checking the router settings, click Redetect on the Check Printer Settings screen to redetect the
printer.
If the printer is found, follow the instructions on the screen to continue to set up network communication.
406
Cannot Proceed beyond Printer Connection Screen/Connect Cable
Screen
If you cannot proceed beyond the Printer Connection screen or the Connect Cable screen, check the
following.
Check1
Make sure USB cable is securely plugged in to printer and computer.
Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the
back of the printer.
Check the items below only if you cannot proceed beyond the Printer Connection screen.
Check2
Follow procedure below to connect printer and computer again.
Important
For Mac OS, make sure the lock icon is on the lower left of the Printers & Scanners screen (Print & Scan
screen in Mac OS X v10.8).
If the icon (locked) is displayed, click the icon to unlock. (The administrator name and the password
are necessary to unlock.)
1. Turn off printer.
2. Unplug USB cable from printer and computer and connect it again.
3. Turn on printer.
Check3
If you cannot resolve problem, follow procedure below to reinstall MP Drivers.
For Windows:
1. Click Cancel.
407
If the Installation Failure screen appears:
1. Click Start Over.
2. Click Exit on Start Setup screen and finish setup.
If the Connection failed. screen appears:
1. Click Next.
2.
Click Next on displayed screen.
3.
Click Back to Top on Select Printer screen.
4.
Click Exit on Start Setup screen and finish setup.
3.
Turn off printer.
4.
Restart computer.
5.
Make sure you have no application software running.
6.
Redo setup according to instructions on Canon website.
Note
You can use the Setup CD-ROM to redo setup.
For Mac OS:
1.
Click Next.
If the Installation Failure screen appears, click Exit on displayed screen and finish setup.
If the Connection failed. screen appears:
1.
Click Next.
2.
Click Next on displayed screen.
3.
Click Back to Top on Select Printer screen.
4.
Click Exit on Start Setup screen and finish setup.
3.
Turn off printer.
4.
Restart computer.
5.
Make sure you have no application software running.
6.
Redo setup according to instructions on Canon website.
408
Cannot Find Printer while Using Wireless LAN
Note
This section describes the troubleshooting when using the computer.
For the troubleshooting when using the smartphone or the tablet:
Cannot Print/Scan from Smartphone/Tablet
Check1
Make sure the printer is turned on.
Check2
Is icon displayed on the touch screen?
If the icon is not displayed, select Active on WLAN active/inactive in Wireless LAN under LAN settings.
Check3
Make sure printer setup is complete.
If it is not, perform setup.
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
Follow the instructions on the Canon website.
Check4
If you can use IJ Network Device Setup Utility, look for printer again. (Windows)
IJ Network Device Setup Utility Screen
Check5
Make sure printer and wireless router network settings match.
Make sure the network settings of the printer (e.g. wireless router name, SSID, network key, etc.) are identical
with those of the wireless router.
To check the settings of the wireless router, refer to the instruction manual provided with it or contact its
manufacturer.
To check the current network settings of the printer, print out the network setting information.
Printing Network Settings
Check6
Make sure the printer is not placed too far away from the wireless router.
Place the wireless router and printer where there are no obstacles between them. Wireless communication
between different rooms or floors is generally poor. Wireless communication can be impeded by building
materials containing metal or concrete. If the printer cannot communicate with the computer over a wireless LAN
due to a wall, place the printer and the computer in the same room.
409
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a
wireless router is nearby, it may cause interference. Place the wireless router as far away from interference
sources as possible.
Note
Though an antenna is attached to most wireless routers, note that some of them have it inside.
Check7
Make sure wireless signal is strong. Monitor signal status and move printer and
wireless router as necessary.
To check the signal strength:
Checking Wireless Network Status
Check8
Make sure the computer is connected to the wireless router.
For more on how to check the computer settings or connection status, see your computer instruction manual or
contact its manufacturer.
Note
If you use the smartphone/tablet, make sure that its Wi-Fi setting is enabled.
Check9
Make sure Enable bidirectional support is selected in the Ports sheet of the
properties dialog box of the printer driver. (Windows)
Check10
Make sure security software's firewall is off.
If your security software's firewall is on, a message may appear warning you that Canon software is attempting
to access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings. Some programs
use a firewall by default.
Check11
If printer is connected to an AirPort Base Station via LAN, use alphanumeric
characters for network identifier (SSID). (Mac OS)
If the problem is not resolved, redo setup.
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
Follow the instructions on the Canon website.
410
Network Connection Problems
Printer Suddenly Cannot Be Used
Network Key Unknown
Printer Cannot Be Used After Replacing Wireless Router or Changing Its
Settings
411
Printer Suddenly Cannot Be Used
Cannot Communicate with Printer Following Network Settings Change
Cannot Communicate with Printer via Wireless LAN
Cannot Communicate with Printer Using Wireless Direct
Cannot Communicate with Printer via Wired LAN
Cannot Print or Scan from a Computer Connected to the Network
Cannot Communicate with Printer Following Network Settings Change
It may take a while for the computer to obtain an IP address, or you may need to restart your computer.
Make sure the computer has obtained a valid IP address, and try again to find the printer.
Cannot Communicate with Printer via Wireless LAN
Check1
Check the power status of printer, network devices (e.g. wireless router), and
smartphone/tablet.
Turn on the printer or devices.
If the power is already turned on, turn it off and on again.
It may be necessary to resolve wireless router problems (e.g. update interval of a key, problems of DHCP
update interval, energy saving mode, etc.) or to update the wireless router firmware.
For details, contact the manufacturer of your wireless router.
Check2
Can you view any web pages on your computer?
Make sure your computer is connected to the wireless router properly.
For more on checking computer settings or connection status, see the instruction manual supplied with the
wireless router or contact the manufacturer.
Check3
Is the printer connected to the wireless router?
Check the connection status between the printer and wireless router by the icon on the touch screen. If the
is not displayed, wireless LAN is disabled, enable wireless LAN.
Check4
Make sure the printer and wireless router network settings match.
Make sure the network settings of the printer (e.g. wireless router name, SSID, network key, etc.) are identical
with those of the wireless router.
412
To check the settings of the wireless router, refer to the instruction manual provided with it or contact its
manufacturer.
To check the current network settings of the printer, print out the network setting information.
Printing Network Settings
If the printer network settings do not match with those of the wireless router, change the network settings of
the printer to match with those of the wireless router.
Network Settings (IJ Network Device Setup Utility) (Windows)
Check5
Make sure the printer is not placed too far away from the wireless router.
Place the wireless router and printer where there are no obstacles between them. Wireless communication
between different rooms or floors is generally poor. Wireless communication can be impeded by building
materials containing metal or concrete. If the printer cannot communicate with the computer over a wireless
LAN due to a wall, place the printer and the computer in the same room.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a
wireless router is nearby, it may cause interference. Place the wireless router as far away from interference
sources as possible.
Note
Though an antenna is attached to most wireless routers, note that some of them have it inside.
Check6
Make sure wireless signal is strong. Monitor signal status and move printer
and wireless router as necessary. (Windows)
Checking Wireless Network Status
Check7
Make sure you are using a valid channel.
Usable wireless channels may be limited depending on wireless network device used by your computer. See
the instruction manual provided with your computer or wireless network device to check usable wireless
channels.
Check8
Make sure channel set on wireless router is a usable channel as confirmed in
Check 7.
If it is not, change the channel set on the wireless router.
Check9
Make sure security software's firewall is off.
If your security software's firewall is on, a message may appear warning you that Canon software is attempting
to access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings. Some
programs use a firewall by default.
Check10
If printer is connected to an AirPort Base Station via LAN, use alphanumeric
characters for network identifier (SSID). (Mac OS)
If the problem is not resolved, redo setup.
413
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
Follow the instructions on the Canon website.
Positioning:
Make sure there are no obstacles between the wireless router and the printer.
Cannot Communicate with Printer Using Wireless Direct
Check1
Check the power status of printer and other devices (smartphone or tablet).
Turn on the printer or devices.
If the power is already turned on, turn it off and on again.
Check2
Is the
icon displayed on the touch screen?
If the icon is not displayed, Wireless Direct is disabled, enable Wireless Direct.
Check3
Check the settings of your device (smartphone/tablet).
Make sure wireless LAN is enabled on your device.
For details, refer to your device's instruction manual.
Check4
Make sure printer is selected as connection for device (e.g. smartphone or
tablet).
Select the identifier for wireless direct (SSID) specified for the printer as the connection destination for devices.
Check the destination on your device.
For details, refer to your device's instruction manual or visit the manufacturer's website.
To check the identifier for wireless direct (SSID) specified for the printer, display it using the operation panel of
the printer or print out the network setting information of the printer.
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
Check5
Have you entered the proper password specified for the wireless direct?
To check the password specified for the printer, display it using the operation panel of the printer or print out
the network setting information of the printer.
414
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
Check6
Make sure the printer is not placed too far away from the device.
Place the device and printer where there are no obstacles between them. Wireless communication between
different rooms or floors is generally poor. Wireless communication can be impeded by building materials
containing metal or concrete. If the printer cannot communicate with the computer over a wireless LAN due to
a wall, place the printer and the computer in the same room.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a
wireless router is nearby, it may cause interference. Place the wireless router as far away from interference
sources as possible.
Place devices a suitable distance from the printer.
Check7
Make sure 5 devices are already connected.
Wireless Direct does not allow more than 5 devices to be connected.
Cannot Communicate with Printer via Wired LAN
Check1
Make sure the printer is turned on.
Check2
Make sure the LAN cable is connected properly.
Make sure the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the
cable properly.
If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router.
If the problem is not resolved, redo setup.
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
For Mac OS:
Follow the instructions on the Canon website.
Cannot Print or Scan from a Computer Connected to the Network
415
Check1
Make sure the computer is connected to the wireless router.
For more on how to check the computer settings or connection status, see your computer instruction manual
or contact its manufacturer.
Check2
If MP Drivers are not installed, install them.
For Windows:
Install the MP Drivers using the Setup CD-ROM or install them from the Canon website.
For Mac OS:
Install the MP Drivers from the Canon website.
Check3
When using wireless LAN, make sure wireless router does not restrict which
computers can access it.
For more on connecting to and setting up your wireless router, see the wireless router instruction manual or
contact its manufacturer.
Note
To check the MAC address or IP address of your computer, see Checking Computer IP Address or MAC
Address.
416
Network Key Unknown
WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect
Setting an Encryption Key
WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot
Connect
For more on setting up a wireless router, see the instruction manual provided with the wireless router or
contact its manufacturer. Make sure your computer can communicate with the wireless router.
Note
For Windows, set up the printer to match the wireless router settings using IJ Network Device Setup
Utility.
Setting an Encryption Key
For more on setting up a wireless router, see the instruction manual provided with the wireless router or
contact its manufacturer. Make sure your computer can communicate with the wireless router.
Note
For Windows, set up the printer to match the wireless router settings using IJ Network Device Setup
Utility.
Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router is
compatible with WPA/WPA2, you can also use WPA2 or WPA.
Using WPA/WPA2
The authentication method, passphrase, and dynamic encryption type must be the same for the
wireless router, the printer, and your computer.
Enter the passphrase configured on the wireless router (a sequence of between 8 and 63
alphanumeric characters, or a 64-character hexadecimal number).
Either TKIP (basic encryption) or AES (secure encryption) is selected automatically as the dynamic
encryption method.
For details, see If WPA/WPA2 Details Screen Appears.
Note
This printer supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2-Personal).
417
Using WEP
The key length, key format, key to use (one of 1 to 4), and authentication method must be the same
for the wireless router, the printer, and your computer.
To communicate with a wireless router that uses automatically generated WEP keys, you must set the
printer to use the key generated by the wireless router, entering it in hexadecimal format.
For Windows:
When the WEP Details screen appears after you click Search... on the Network Settings
(Wireless LAN) screen in IJ Network Device Setup Utility, follow the on-screen instructions to set
the WEP key length, format, and the number.
For details, see If WEP Details Screen Appears.
Note
If the printer is connected to an AirPort Base Station via LAN:
If the printer is connected to an AirPort Base Station via a LAN, check the settings in Wireless
Security of AirPort Utility.
Select 64 bit if WEP 40 bit is selected for key length in AirPort Base Station.
Select 1 for Key ID. Otherwise, computer will not be able to communicate with printer via the
wireless router.
418
Printer Cannot Be Used After Replacing Wireless Router or
Changing Its Settings
When you replace a wireless router, redo the network setup for the printer.
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
Follow the instructions on the Canon website.
If this does not solve the problem, see below.
Cannot Communicate with Printer After Enabling MAC/IP Address Filtering or Encryption Key on
Wireless Router
With Encryption On, Cannot Communicate with Printer After Changing Encryption Type at Wireless
Router
Cannot Communicate with Printer After Enabling MAC/IP Address
Filtering or Encryption Key on Wireless Router
Check1
Check wireless router setting.
To check the wireless router setting, see the instruction manual provided with the wireless router or contact its
manufacturer. Make sure the computer and the wireless router can communicate with each other under this
setting.
Check2
If filtering MAC addresses or IP addresses at wireless router, check that MAC
addresses or IP addresses for computer, network device, and printer are registered.
Check3
If using WPA/WPA2 or WEP key, make sure encryption key for computer,
network device, and printer matches key set for wireless router.
Not only the WEP key itself, but also the key length, key format, the key ID to use, and the authentication
method must be the same for the printer, the wireless router, and the computer.
For details, see Setting an Encryption Key.
419
With Encryption On, Cannot Communicate with Printer After
Changing Encryption Type at Wireless Router
If you change the encryption type for the printer and it subsequently cannot communicate with the
computer, make sure the encryption type for the computer and the wireless router matches the type set
for the printer.
Cannot Communicate with Printer After Enabling MAC/IP Address Filtering or Encryption Key on
Wireless Router
420
Other Network Problems
Checking Network Information
Restoring to Factory Defaults
Message Appears on Computer During Setup
Packets Are Sent Constantly (Windows)
421
Checking Network Information
Checking Printer IP Address or MAC Address
Checking Computer IP Address or MAC Address
Checking Communication Between the Computer, the Printer, and the Wireless Router
Checking Network Setting Information
Checking Printer IP Address or MAC Address
To check the printer's IP Address or MAC address, print out the network settings information or use the
operation panel to display it.
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
For Windows, you can check the network setting information on the computer screen.
IJ Network Device Setup Utility Screen
You can display the printer's MAC address on the touch screen.
System information
Checking Computer IP Address or MAC Address
To check the IP Address or MAC address of your computer, follow the instructions below.
For Windows:
1. Select Command Prompt as shown below.
In Windows 10, right-click Start button and select Command Prompt.
In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command
Prompt is not displayed on the Start screen, select the Search charm and search for
"Command Prompt".
In Windows 7 or Windows Vista, click Start > All Programs > Accessories > Command
Prompt.
2. Enter "ipconfig/all" and press Enter.
The IP address and MAC address of your computer appear. If your computer is not connected to
a network, the IP address does not appear.
For Mac OS:
422
1. Select System Preferences from Apple menu, and then click Network.
2. Make sure network interface used by computer is selected, and then click Advanced.
When you are using wireless LAN on your computer, make sure Wi-Fi is selected as network
interface. When you are using wired LAN, make sure Ethernet is selected.
3. Check the IP address or MAC address.
Click TCP/IP to check the IP address.
Click Hardware to check the MAC address.
Checking Communication Between the Computer, the Printer, and the
Wireless Router
Perform a ping test to check if communication is taking place.
For Windows:
1. Select Command Prompt as shown below.
In Windows 10, right-click Start button and select Command Prompt.
In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command
Prompt is not displayed on the Start screen, select the Search charm and search for
"Command Prompt".
In Windows 7 or Windows Vista, click Start > All Programs > Accessories > Command
Prompt.
2. Type the ping command and press Enter.
The ping command is as follows: ping XXX.XXX.XXX.XXX
"XXX.XXX.XXX.XXX" is the IP address of the target device.
If communication is taking place, a message like the one shown below appears.
Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255
If Request timed out appears, communication is not taking place.
For Mac OS:
1. Start Network Utility as shown below.
In Mac OS X v10.11, Mac OS X v10.10 or Mac OS X v10.9, select Computer from Go menu of
Finder, double-click Macintosh HD > System > Library > CoreServices > Applications >
Network Utility.
In Mac OS X v10.8, open Utilities folder in Applications folder, then double-click Network
Utility.
2. Click Ping.
3. Make sure Send only XX pings (XX are numbers) is selected.
4. Enter IP address of target printer or target wireless router in Enter the network address to ping.
423
5. Click Ping.
"XXX.XXX.XXX.XXX" is the IP address of the target device.
A message such as the following appears.
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms
--- XXX.XXX.XXX.XXX ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
If packet loss is 100%, communication is not taking place. Otherwise, computer is communicating
with target device.
Checking Network Setting Information
To check the printer's network settings information, print out the network settings information or use the
operation panel to display it.
Display on the touch screen.
LAN settings
Print the network settings.
Printing Network Settings
424
Restoring to Factory Defaults
Important
For Windows:
Initialization erases all network settings on the printer, making printing or scanning operation from a
computer over a network impossible. To use the printer over a network again after restoring it to the
factory defaults, use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
For Mac OS:
Initialization erases all network settings on the printer, making printing or scanning operation from a
computer over a network impossible. To use the printer over a network again after restoring it to the
factory defaults, follow the instructions on the Canon website to redo setup.
Initialize the network setting using the printer's operation panel.
Reset setting
425
Printing Problems
Printing Does Not Start
No Ink Comes Out
Paper Does Not Feed Properly/"No Paper" Error
Cannot Print on Disc Label
Print Results Are Unsatisfactory
426
Printing Does Not Start
Check1
Make sure printer is securely plugged in and press ON button to turn it on.
The POWER lamp flashes while the printer is initializing. Wait until the POWER lamp stops flashing and remains
lit.
Note
If you are printing large data such as photos or other graphics, printing may take longer to start. The
POWER lamp flashes while the computer is processing data and sending it to the printer. Wait until printing
starts.
Check2
Make sure printer is properly connected to computer.
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When the
USB cable is securely plugged in, check the following:
If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact
the vendor of the relay device.
There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
If you use the printer over a LAN, make sure the printer is correctly set up for network use.
Note
For Windows: If you can use IJ Network Device Setup Utility, check the network connection status.
Check3
Make sure paper settings match information set for rear tray or cassette.
If the paper settings do not match the information set for the rear tray or the cassette, an error message appears
on the touch screen. Follow the instructions on the touch screen to solve the problem.
Note
You can select whether the message which prevents misprinting is displayed.
To change the message view setting when printing or copying using the printer's operation panel:
Device user settings
To change the message view setting when printing using the printer driver:
Changing the Printer Operation Mode (Windows)
Changing the Printer Operation Mode (Mac OS)
Check4
If printing from a computer, delete unnecessary print jobs.
For Windows:
427
Deleting the Undesired Print Job
For Mac OS:
Deleting the Undesired Print Job
Check5
Make sure that the paper output tray is at the normal print position.
While printing other than disc label printing, pull out the paper output tray to the normal print position. If the paper
output tray is at the disc label print position, pull out it to the normal print position and select OK on the touch
screen.
Check6
Are Media Type and Page Size settings of printer driver correct?
When using non Canon genuine specialty paper, be sure to select the proper media type or page size correctly
in the printer driver.
Check the settings following the instructions below and retry the printing.
For Windows:
1.
Make sure either A4 (Art Paper Margin 35) or Letter (Art Paper Margin 35) is selected in application.
If the page size you want to use is not displayed, open the File menu of the application and select
Print. Then make sure the name of your printer is selected.
2.
Make sure that the paper selected for Media Type in the Main sheet of printer driver matches paper
loaded in printer.
3.
Make sure Page Size setting in Page Setup sheet of printer driver is same as size set in step 1.
For Mac OS:
1.
Make sure either A4 (Art Paper Margin 35) or US Letter (Art Paper Margin 35) is selected in
application.
If the page size you want to use is not displayed, open the File menu of the application and select
Print. Then make sure the name of your printer is selected.
2.
Make sure paper selected for Media Type in Print dialog of printer driver matches paper loaded in
printer.
3.
Make sure Paper Size setting in Page Setup dialog of printer driver is same as size set in step 1.
Check7
Is your printer's printer driver is selected when printing?
The printer will not print properly if you are using a printer driver for a different printer.
For Windows:
Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box.
Note
To make the printer the one selected by default, select Set as Default Printer.
For Mac OS:
Make sure your printer's name is selected in Printer in the Print dialog.
Note
To make the printer the one selected by default, select the printer for Default printer.
428
Check8
Is print data extremely large? (Windows)
Click Print Options on Page Setup sheet of the printer driver. Then set Prevention of Print Data Loss to On in
the dialog that appears.
* This may reduce print quality.
Check9
If printing from your computer, restart computer.
429
No Ink Comes Out
Check1
Has ink run out?
Open the scanning unit / cover and check the ink lamp.
Checking the Ink Status with the Ink Lamps
Check2
Is orange tape or protective film still on ink tank?
Make sure all the protective film is peeled off to expose the Y-shaped air hole, as shown below (A).
If the orange tape remains on the ink tank (B), peel it off.
Check3
Are the print head nozzles clogged?
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing
Is Faint or Uneven.
If nozzle check pattern is not printed correctly:
Check if the ink tank for the problem color is empty.
If the ink tank is not empty, perform print head cleaning and try printing the nozzle check pattern again.
If problem is not resolved after performing print head cleaning twice:
Perform print head deep cleaning.
If the problem is not resolved after performing print head deep cleaning, turn off the printer and perform
print head deep cleaning again 24 hours later.
If problem is not resolved after performing print head deep cleaning twice:
If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your
nearest Canon service center to request a repair.
430
Paper Does Not Feed Properly/"No Paper" Error
Check1
Make sure paper is loaded.
Loading Paper
Check2
When loading paper, consider the following.
When loading two or more sheets of paper, align the edges of the sheets before loading the paper.
When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load
limit.
However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.
Always load the paper in portrait orientation, regardless of the printing orientation.
When you load the paper on the rear tray, place the print side facing UP and align the right and left paper
guides with the paper stack.
Loading Paper
In the cassette, be sure to load only plain paper.
When you load the paper on the cassette, place the print side facing DOWN and align the right/left/front
paper guides with the paper stack.
Loading Paper
Check3
Is paper too thick or curled?
Unsupported Media Types
Check4
When loading postcards or envelopes, consider the following:
If a postcard is curled, it may not feed properly even though the paper stack does not exceed the paper load
limit.
Load Japanese postcards with their postcode column downward on the rear tray.
When printing on envelopes, see Loading Paper, and prepare the envelopes before printing.
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.
Check5
Make sure media type and paper size settings match with loaded paper.
Check6
Make sure that there are not any foreign objects in the rear tray.
431
If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it.
If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply,
then remove the foreign object.
Note
If the feed slot cover is opened, close it slowly.
Check7
Clean paper feed roller.
Cleaning Paper Feed Rollers
Note
Cleaning the paper feed roller abrades it, so do this only when necessary.
Check8
If two or more sheets of paper feed from cassette at once, clean inside of
cassette.
Cleaning Cassette Pads
432
Check9
Are transport unit cover and rear cover attached properly?
See Rear View for the positions of the transport unit cover and the rear cover.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
433
Cannot Print on the Disc Label
Disc Label Printing Does Not Start
Disc Tray Does Not Feed Properly
Disc Tray Jammed
Disc Label Printing Does Not Start
Check1
Is disc tray placed properly?
Place the disc tray properly again and tap OK on the touch screen.
Use the disc tray supplied with this printer ("M" is on the upper side).
For more on placing the disc tray, see Placing a Printable Disc.
Check2
Is printable disc placed on disc tray?
Place the printable disc on the disc tray properly and tap OK on the touch screen.
Use the disc tray supplied with this printer ("M" is on the upper side).
For more on placing the disc tray, see
Placing a Printable Disc.
Check3
If disc label printing stops before it is complete, try operation again.
If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.
To resume initializing, tap OK on the touch screen.
Try the operation again following the on-screen instructions.
Disc Tray Does Not Feed Properly
Check1
Is disc tray placed properly?
Place the disc tray properly again and tap OK on the touch screen.
Make sure you are using the disc tray supplied with the printer ("M" is on the upper side).
For more on placing the disc tray, see
Placing a Printable Disc.
Check2
Unrecognizable printable disc may be placed.
Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.
434
Disc Tray Jammed
Pull out the disc tray gently.
If the disc tray cannot be pulled out, turn the printer off and turn it back on again. The disc tray will
automatically be ejected.
When the disc tray is pulled out, place the disc tray ("M" is on the upper side) again and retry printing. For
more on placing the disc tray, see Placing a Printable Disc.
If the disc tray is still jammed, check if there is a problem with the printable disc.
Disc Tray Does Not Feed Properly
435
Print Results Are Unsatisfactory
If the print results are unsatisfactory due to white streaks, misaligned lines, or uneven colors, check the
paper and print quality settings first.
Check1
Do page size and media type settings match size and type of loaded paper?
If these settings do not match, it is not possible to obtain the proper result.
If you are printing a photograph or an illustration, an incorrect paper type setting may reduce the quality of the
printout color.
Also, if you print with an incorrect paper type setting, the printed surface may be scratched.
In borderless printing, uneven coloring may occur depending on the combination of the paper type setting and
the loaded paper.
The method for checking the paper and print quality settings differs depending on what you are using your printer
for.
Copying Check the settings using the operation panel.
Setting Items for Copying
Copying a photo Check the settings using the operation panel.
Copying Photos
Printing from memory card Check the settings using the operation panel.
Setting Items for Photo Printing Using Operation Panel
Printing from a PictBridge (Wireless LAN)
compliant device
Check the settings on your PictBridge (Wireless LAN) compliant device.
PictBridge (Wireless LAN) Print Settings
Check the settings using the operation panel.
PictBridge print settings
Printing from your computer Check the settings using the printer driver.
For Windows:
Printing with Easy Setup
For Mac OS:
Printing with Easy Setup
Check2
Make sure appropriate print quality is selected (see table above).
Select a print quality suited to the paper and to what you are printing. If you notice blurs or uneven colors,
increase the print quality setting and retry the printing.
436
Note
When printing from a PictBridge (Wireless LAN) compliant device, set the print quality setting using the
operation panel.
This setting cannot be made on the PictBridge (Wireless LAN) compliant device.
Check3
If problem is not resolved, check other causes.
See also the sections below:
Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear
Lines Are Misaligned
Paper Is Smudged / Printed Surface Is Scratched
Vertical Line Next to Image
Cannot Complete Printing
Part of Page Is Not Printed (Windows)
Lines Incomplete or Missing (Windows)
Images Incomplete or Missing (Windows)
Ink Blots / Paper Curl
Back of Paper Is Smudged
Uneven or Streaked Colors
437
Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks
Appear
Printing Is Blurry
Colors Are Wrong
438
White Streaks Appear
Check1
Check paper and print quality settings.
Print Results Are Unsatisfactory
Check2
Check status of ink tanks. Replace ink tank if ink has run out.
Replacing Ink Tanks
Check3
Is orange tape or protective film still on ink tank?
Make sure all the protective film is peeled off to expose the Y-shaped air hole, as shown below (A).
If the orange tape remains on the ink tank (B), peel it off.
Check4
Are the print head nozzles clogged?
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing
Is Faint or Uneven.
If nozzle check pattern is not printed correctly:
Check if the ink tank for the problem color is empty.
If the ink tank is not empty, perform print head cleaning and try printing the nozzle check pattern again.
If problem is not resolved after performing print head cleaning twice:
439
Perform print head deep cleaning.
If the problem is not resolved after performing print head deep cleaning, turn off the printer and perform
print head deep cleaning again 24 hours later.
If problem is not resolved after performing print head deep cleaning twice:
If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your
nearest Canon service center to request a repair.
Check5
When using paper with one printable surface, check the correct printable side
of the paper.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
When you load paper on the rear tray, load paper with the printable side facing up. When you load paper in the
cassette, load paper with the printable side facing down.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
When copying, see also the sections below:
Check6
Is platen glass dirty?
Clean the platen glass.
Cleaning the Platen Glass and Document Cover
Check7
Make sure original is properly loaded on platen glass.
Loading Originals
Check8
Is original loaded with side to be copied facing down on platen glass?
Check9
Did you copy a printout done by this printer?
If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.
Print from the printer directly, or reprint from the computer if you can reprint from it.
440
Lines Are Misaligned
Check1
Check paper and print quality settings.
Print Results Are Unsatisfactory
Check2
Perform print head alignment.
If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
Aligning the Print Head
Note
If the problem is not resolved after performing the print head alignment, perform print head alignment
manually from your computer.
For Windows:
Aligning the Print Head Position
For Mac OS:
Aligning the Print Head Position
Check3
Increase print quality and try printing again.
Increasing the print quality using the operation panel or the printer driver may improve the print result.
441
Paper Is Smudged / Printed Surface Is Scratched
Paper Is Smudged
Smudged Edges Smudged Surface
Printed Surface Is Scratched
Check1
Check paper and print quality settings.
Print Results Are Unsatisfactory
Check2
Check paper type.
Make sure you are using the right paper for what you are printing.
Supported Media Types
Check3
Correct curl before loading paper.
When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. Rolling
this paper in the opposite direction to flatten it may crack the paper surface and reduce the print quality.
We recommend putting unused paper back into the package and storing it flat.
Plain Paper
Turn the paper over and reload it to print on the other side.
Other Paper
If the paper corners curl more than 0.1 inch / 3 mm (A) in height, the paper may smudge or may not feed
properly. Follow the instructions below to correct the paper curl.
442
1. Roll up paper in opposite direction to paper curl as shown below.
2. Check that paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.
Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing.
This may improve the print result.
(C) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
Check4
Set printer to prevent paper abrasion.
Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper. If
you notice abrasion even with the media type set correctly to match the paper, set the printer to prevent paper
abrasion using the operation panel or the computer.
This may reduce the print speed.
* Once you have finished printing, undo this setting. Otherwise, it will apply to subsequent print jobs.
From operation panel
Press the HOME button, select
(Setup) icon, Settings, Device settings, and Print settings, and
then set Prevent paper abrasion to ON.
Changing Settings from Operation Panel
From computer
For Windows:
Open the printer driver setup window, select Custom Settings in Maintenance sheet, select Prevent
paper abrasion check box, and then click OK.
443
To open the printer driver setup window, see How to Open the Printer Driver Setup Window.
For Mac OS:
In the Canon IJ Printer Utility2, select Custom Settings in the pop-up menu, select Prevent paper
abrasion check box, and then click Apply.
To open the Canon IJ Printer Utility2, see Opening the Canon IJ Printer Utility2.
Check5
If intensity is set high, reduce intensity setting and try printing again.
If you are printing with a high intensity setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
Printing from your computer
Check the intensity setting in the printer driver.
For Windows:
Adjusting Intensity
For Mac OS:
Adjusting Intensity
Copying
Setting Items for Copying
Check6
Do not print outside recommended printing area.
If you print outside the recommended printing area of your paper, ink may stain the lower edge of the paper.
Resize the document using application software.
Print Area
Check7
Is platen glass dirty?
Clean the platen glass.
Cleaning the Platen Glass and Document Cover
Check8
Is paper feed roller dirty?
Clean the paper feed roller.
Cleaning Paper Feed Rollers
Note
Cleaning the paper feed roller abrades it, so do this only when necessary.
Check9
Is inside of printer dirty?
During duplex printing, ink may stain the inside of the printer, smudging the printout.
Perform the bottom plate cleaning to clean the inside of the printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
Note
To prevent staining inside the printer, be sure to set the correct paper size.
444
Check10
Set longer ink drying time.
This allows the printed surface to dry, preventing smudges and scratches.
For Windows:
1. Make sure printer is turned on.
2. Open printer driver setup window.
How to Open the Printer Driver Setup Window
3.
Click Maintenance tab and Custom Settings.
4.
Drag Ink Drying Wait Time slide bar to set wait time and click OK.
5.
Check message and click OK.
For Mac OS:
1.
Make sure printer is turned on.
2.
Open Canon IJ Printer Utility2.
Opening the Canon IJ Printer Utility2
3.
Select Custom Settings in pop-up menu.
4.
Drag Ink Drying Wait Time: slide bar to set wait time and click Apply.
5.
Check message and click OK.
445
Vertical Line Next to Image
Check
Is loaded paper size correct?
If the loaded paper is larger than the size you specified, a vertical line may appear in the margin.
Set the paper size to match the loaded paper.
Print Results Are Unsatisfactory
Note
The direction of the vertical line pattern may vary depending on the image data or the print setting.
This printer performs automatic cleaning when necessary to keep printouts clean. A small amount of ink is
ejected for cleaning.
Although the ink is normally ejected onto the ink absorber at the outer edge of the paper, it may get onto
the paper if the loaded paper is larger than the set size.
446
Scanning Problems (Windows)
Scanning Problems
IJ Scan Utility Error Messages
ScanGear (Scanner Driver) Error Messages
447
Scanning Problems
Scanner Does Not Work
ScanGear (Scanner Driver) Does Not Start
448
Scanner Does Not Work
Check 1
Make sure that your scanner or printer is turned on.
Check 2
Connect the USB cable to a different USB port on the computer.
Check 3
If the USB cable is connected to a USB hub, remove it from the USB hub and
connect it to a USB port on the computer.
Check 4
With network connection, check the connection status and reconnect as
needed.
Check 5
Restart the computer.
449
ScanGear (Scanner Driver) Does Not Start
Check 1
Make sure MP Drivers is installed.
If not installed, install MP Drivers from the Setup CD-ROM or our website.
Check 2
Select your scanner or printer on the application's menu.
Important
If your scanner or printer name is displayed multiple times, select the one that does not include WIA.
Note
The operation may differ depending on the application.
Use the WIA driver when scanning from a WIA-compliant application.
Scanning with WIA Driver
Check 3
Make sure that the application supports TWAIN.
You cannot start ScanGear (scanner driver) from applications not supporting TWAIN.
Check 4
Scan and save images with IJ Scan Utility and open the files in your
application.
450
Mechanical Problems
Power Does Not Come On
Power Shuts Off By Itself
USB Connection Problems
Cannot Communicate with Printer via USB
Touch Screen Shows Wrong Language
451
Power Does Not Come On
Check1
Press ON button.
Check2
Make sure power plug is securely connected to printer, and then turn it back on.
Check3
Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn it
on again.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
452
Power Shuts Off By Itself
Check
If printer is set to turn off automatically after a certain time, disable this setting.
If you have set the printer to turn off automatically after a specified time, the power will shut off by itself once that
time has elapsed.
If you are using a Windows and if you do not want the printer to turn off automatically:
Open the printer driver setup window and in Auto Power in Maintenance sheet, select Disable for Auto
Power Off.
If you are using a Mac OS and if you do not want the printer to turn off automatically:
Open Canon IJ Printer Utility2, select Power Settings in the pop-up menu, and then select Disable for
Auto Power Off on Auto Power.
Note
You can also enable the printer to turn on/off automatically from the operation panel.
ECO settings
If you are using a Windows, you can also enable the printer to turn on/off automatically from ScanGear
(scanner driver).
Scanner Tab
453
USB Connection Problems
Printing or Scanning Is Slow/Hi-Speed USB Connection Does Not
Work/"This device can perform faster" Message Appears (Windows)
If your system environment does not support Hi-Speed USB, the printer operates at the slower speed of
USB 1.1. In this case, the printer works properly but printing or scanning speed may slow down due to the
communication speed.
Check
Check following to make sure your system environment supports Hi-Speed
USB connection.
Does the USB port on your computer support Hi-Speed USB connection?
Does the USB cable or the USB hub support Hi-Speed USB connection?
Be sure to use a certified Hi-Speed USB cable. We recommend that the USB cable be no longer than 10
feet / 3 meters or so.
Does the operating system of your computer support Hi-Speed USB connection?
Install the latest update for your computer.
Is the Hi-Speed USB driver working properly?
If necessary, obtain and install the latest version of the Hi-Speed USB driver for your computer.
Important
For more information, contact the manufacturer of your computer, USB cable, or USB hub.
454
Cannot Communicate with Printer via USB
Check1
Make sure printer is turned on.
Check2
Connect USB cable properly.
As the illustration below, the USB port is at the back of the printer.
Check3
Make sure Enable bidirectional support is selected in Ports sheet of
properties dialog box of printer driver. (Windows)
How to Open the Printer Driver Setup Window
455
Installation and Download Problems
Cannot Install MP Drivers
Easy-WebPrint EX Does Not Start or Easy-WebPrint EX Menu Does Not Appear
(Windows)
456
Cannot Install MP Drivers
For Windows:
For Mac OS:
For Windows:
If installation does not start when you insert Setup CD-ROM:
Follow the instructions below to start the installation.
1. Make the following settings.
In Windows 10, click Start button > File Explorer, and then click This PC from list on left.
In Windows 8.1 or Windows 8, select Explorer icon in Taskbar on Desktop, and then select
This PC (Computer for Windows 8) from list on left.
In Windows 7 or Windows Vista, click Start, and then click Computer.
2. Double-click the CD-ROM icon in the window that appears.
If the contents of the CD-ROM appear, double-click MSETUP4.EXE.
If you cannot install the MP Drivers with the Setup CD-ROM, install them from the Canon
website.
Note
If the CD-ROM icon does not appear, try the following:
Remove the CD-ROM from your computer and reinsert it.
Restart your computer.
If the icon still does not appear, try a different disc and see if it appears. If it does, there is a
problem with the Setup CD-ROM. Contact your nearest Canon service center to request a repair.
457
If you cannot get past the Printer Connection screen:
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Other cases:
Reinstall the MP Drivers.
If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then
reinstall the MP Drivers.
Deleting the Unnecessary MP Drivers
Reinstall the MP Drivers with the Setup CD-ROM or install them from the Canon website.
Note
If the installer was stopped due to a Windows error, Windows operation may be unstable, and
you may not be able to install the drivers. Restart your computer and then reinstall the drivers.
For Mac OS:
Download the driver from the support page of Canon website and reinstall it.
458
Updating MP Drivers in Network Environment (Windows)
Download the latest MP Drivers.
The latest MP Drivers for your model are available for download on the Canon website.
Uninstall the existing MP Drivers and follow the installation instructions to install the latest MP Drivers that
you downloaded. In the connection method selection screen, select Use the printer with wireless LAN
connection. The printer is detected automatically in the network.
Make sure the printer was found, and install the MP Drivers following the on-screen instructions.
Note
The network settings on the printer are not affected, so the printer can be used on the network without
redoing settings.
459
Errors and Messages
An Error Occurs
Message Appears
460
An Error Occurs
If an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appears
automatically. Take the appropriate action described in the message.
When an error occurs, a message is displayed on the computer screen or the touch screen. Depending on
the error, a Support Code (error number) is displayed on the computer screen or the touch screen.
When a Support Code and a message are displayed on the computer
screen:
For Windows:
For Mac OS:
* The screen differs depending on the OS you are using.
461
When a Support Code and a message are displayed on the touch screen:
For details on how to resolve errors, see List of Support Code for Error.
Note
For details on how to resolve errors without Support Codes, see Message Appears.
462
Message Appears
This section describes some of the errors and messages that may appear.
Note
A support code (error number) is displayed on the computer or on the touch screen for some errors. For
details on errors that have support code, see List of Support Code for Error.
If a message appears on the touch screen, see below.
Message Appears on Touch Screen
If a message appears on the computer, see below.
Error Regarding Automatic Duplex Printing Is Displayed
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)
Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed (Windows)
Inkjet Printer/Scanner/Fax Extended Survey Program Icon Appears (Mac OS)
Message Appears on Touch Screen
Check the message and take an appropriate action.
Data of supported types are not saved.
There is no image data saved on the memory card that can be read by this printer.
The printer may not recognize the file if the file name or folder path contain certain characters.
Use only alphanumeric characters.
Photo data edited or processed on a computer must be printed from the computer.
Note
When a photo which has been processed on a computer is selected, "?" is displayed on the
touch screen.
The card is currently writable from PC. Set to [Not writable from PC].
The card slot is set to Writable from USB PC.
You cannot print from the memory card when the card slot is set to Writable from USB PC. After
writing on the memory card, select Not writable from PC in Read/write attribute under Device user
settings.
Power was not turned off correctly the last time. Press the button when
turning power off.
The printer may have been unplugged while the power was still on.
Tap OK on the touch screen.
463
Note
See Unplugging the Printer to unplug the printer correctly.
Cannot connect to the server. Please wait a while and try again.
The printer cannot connect to the server due to a communication error.
Tap OK on the touch screen and try again after a while.
Error Regarding Automatic Duplex Printing Is Displayed
Check
See Automatic Duplex Printing Problems and take the appropriate action.
Error Regarding Power Cord Being Unplugged Is Displayed
(Windows)
The printer may have been unplugged while it was on.
Check the error message that appears on the computer and click OK.
The printer starts printing.
See Unplugging the Printer for unplugging the power cord.
Writing Error/Output Error/Communication Error (Windows)
Check1
If POWER lamp is off, make sure printer is plugged in and turn it on.
The POWER lamp flashes while the printer is initializing. Wait until the POWER lamp stops flashing and
remains lit.
Check2
Make sure printer is properly connected to computer.
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:
If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.
There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
464
If you use the printer over a LAN, make sure the printer is connected to the network with a LAN cable or is
correctly set up for network use.
Check3
Make sure MP Drivers are installed correctly.
Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.
Check4
When printer is connected to your computer with a USB cable, check device
status from your computer.
Follow the procedure below to check the device status.
1.
Open the Device Manager on your computer as shown below.
If the User Account Control screen appears, follow the on-screen instructions.
In Windows 10, right-click Start button and select Device Manager.
In Windows 8.1 or Windows 8, select Control Panel from Settings charm on Desktop > Hardware
and Sound > Device Manager.
In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, and Device Manager.
2.
Double-click Universal Serial Bus controllers and USB Printing Support.
If the USB Printing Support Properties screen does not appear, make sure the printer is correctly
connected to the computer.
Check2
Make sure printer is properly connected to computer.
3.
Click General tab and check for a device problem.
If a device error is shown, see Windows Help to resolve it.
Other Error Messages (Windows)
Check
If an error message appears outside printer status monitor, check the
following:
"Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
"Could not spool successfully due to insufficient memory"
Close other applications to increase the available memory.
If you still cannot print, restart your computer and retry the printing.
"Printer driver could not be found"
Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.
"Could not print Application name - File name"
Try printing again once the current job is complete.
465
Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is
Displayed (Windows)
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a screen appears asking for
permission to send the printer and application usage information every month for about ten years.
Read the information on the screen and follow the instructions below.
If you agree to participate in survey program:
Click Agree and follow the on-screen instructions. The printer usage information is sent via the
Internet. Once you have completed the procedure, the information is subsequently sent automatically
and the confirmation screen does not reappear.
Note
When the information is being sent, a warning such as an Internet security message may appear.
Make sure the program name is "IJPLMUI.exe" and allow it.
If you clear Send automatically from the next time check box, the information will not be sent
automatically from next time and a confirmation screen will appear at the time of the next survey.
To send the information automatically, see Changing confirmation screen setting:.
If you do not agree to participate in survey program:
Click Do not agree. The confirmation screen closes and the survey is skipped. The confirmation
screen will reappear one month later.
To uninstall Inkjet Printer/Scanner/Fax Extended Survey Program:
To uninstall the Inkjet Printer/Scanner/Fax Extended Survey Program, click Uninstall and follow the
on-screen instructions.
466
Changing confirmation screen setting:
1. Make the following settings.
In Windows 10, right-click Start button and select Programs and Features.
In Windows 8.1 or Windows 8, select Control Panel from Settings charm on Desktop >
Programs > Programs and Features.
In Windows 7, or Windows Vista, select Start menu > Control Panel > Programs >
Programs and Features.
Note
A confirmation/warning dialog box may appear when installing, uninstalling or starting up
software.
This dialog box appears when administrative rights are required to perform a task.
If you are logged in on an account with administrator privileges, follow the on-screen
instructions.
2. Select Canon Inkjet Printer/Scanner/Fax Extended Survey Program.
3. Select Change.
If you select Yes after you have followed the on-screen instructions, the confirmation screen will
appear at the time of the next survey.
If you select No, the information will be sent automatically.
Note
If you select Uninstall, the Inkjet Printer/Scanner/Fax Extended Survey Program is
uninstalled. Follow the on-screen instructions.
Inkjet Printer/Scanner/Fax Extended Survey Program Icon Appears
(Mac OS)
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, the printer and application
software usage information is sent every month for about ten years. The Inkjet Printer/Scanner/Fax
Extended Survey Program icon appears in the Dock when it is time to send the printer usage
information.
Click the icon, read the information that appears, and then follow the instructions below.
467
If you agree to participate in survey program:
Click Agree and follow the on-screen instructions. The printer usage information is sent via the
Internet. Once you have completed the procedure, the information is subsequently sent automatically
and the confirmation screen does not reappear.
Note
If you clear Send automatically from the next time check box, the information will not be sent
automatically the next time and the Inkjet Printer/Scanner/Fax Extended Survey Program icon
will appear in the dock at the time of the next survey.
If you do not agree to participate in survey program:
Click Do not agree. The confirmation screen closes and the survey is skipped. The confirmation
screen will reappear one month later.
To stop sending information:
Click Turn off. This stops the Inkjet Printer/Scanner/Fax Extended Survey Program, and information
is not sent. To resume the survey, see Changing setting:.
To uninstall Inkjet Printer/Scanner/Fax Extended Survey Program:
1. Stop Inkjet Printer/Scanner/Fax Extended Survey Program.
Changing setting:
468
2. Select Applications from Go menu of Finder, double-click Canon Utilities folder and Inkjet
Extended Survey Program folder.
3. Move Canon Inkjet Printer/Scanner/Fax Extended Survey Program.app file to Trash.
4. Restart computer.
Empty Trash and restart your computer.
Changing setting:
To display the confirmation screen every time the printer usage information is sent or to resume
surveying, follow the procedure below.
1. Select Applications from Go menu of Finder, double-click Canon Utilities folder and Inkjet
Extended Survey Program folder.
2. Double-click Canon Inkjet Printer/Scanner/Fax Extended Survey Program icon.
Do not display the confirmation screen when information is sent:
If the check box is selected, the information will be sent automatically.
If the check box is not selected, Inkjet Printer/Scanner/Fax Extended Survey Program
icon will appear in the Dock at the time of the next survey. Click the icon and follow the on-
screen instructions.
Turn off/Turn on button:
Click the Turn off button to stop the Inkjet Printer/Scanner/Fax Extended Survey Program.
Click the Turn on button to restart the Inkjet Printer/Scanner/Fax Extended Survey Program.
469
List of Support Code for Error
Support code appears on the touch screen and your computer screen when errors occur.
A "support code" is an error number, and appears along with an error message.
When an error occurs, check the support code displayed on the touch screen and computer screen and take
the appropriate action in response.
Support Code Appears on Touch Screen and Computer Screen
1000 to 1ZZZ
1000 1001 1002 1003 1200 1240
1258 1259 1270 1300 1303 1304
1309 1310 1313 1401 1403 1405
140B 1410 1411 1412 1413 1414
1415 1551 1552 1600 1660 1680
1681 1684 1688 1689 1700 1701
1730 1731 1750 1830 1850 1851
1855 1857 185B 185C 185D 1871
1874 1890
2000 to 2ZZZ
2110 2113 2114 2120 2123 2504
2700 2900 2901
3000 to 3ZZZ
3402 3403 3405 3407 3408 3410
3411 3412 3413 3438 3439 3440
3441 3442 3443 3444 3445 3446
3447
4000 to 4ZZZ
4100 4103 4104
5000 to 5ZZZ
5011 5012 5050 5100 5200 5400
470
5700 5B00 5B01 5C02
6000 to 6ZZZ
6000 6001 6004 6500 6502 6800
6801 6900 6901 6902 6910 6911
6920 6921 6930 6931 6932 6933
6934 6935 6936 6937 6938 6940
6941 6942 6943 6944 6945 6946
6950 6960 6A80 6A81 6A82
A000 to ZZZZ
B202 B203 B204 B205 C000
For paper jam support codes, see also List of Support Code for Error (Paper Jams).
471
List of Support Code for Error (Paper Jams)
If paper jams, remove it following the appropriate procedure as shown below.
If you can see the jammed paper at the paper output slot or the rear tray:
If the paper fed from the rear tray is jammed:
1300
If you cannot see the jammed paper at the paper output slot or the rear tray:
If the paper fed from the cassette is jammed:
1303
If the paper is jammed when performing automatic duplex printing:
1304
If the paper is jammed as the printer pulled in the printed paper:
1313
If the paper tears and you cannot remove it from the paper output slot or from the transport unit:
Paper Is Jammed inside Printer
Cases other than above:
Other Cases
472
1300
Cause
Paper is jammed when feeding paper from rear tray.
What to Do
If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from
the rear tray following the instructions below.
1.
Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier.
Hold the paper with both hands, and pull it out slowly so as not to tear it.
Note
If you cannot pull out the paper, turn the printer back on without pulling forcibly. The paper may
be ejected automatically.
If paper becomes jammed during printing and you need to turn off the printer to remove it, tap
Stop to stop the printing before you turn off the printer.
If the paper tears and you cannot remove the jammed paper from the paper output slot or the
rear tray, remove the paper from inside the printer.
Paper Is Jammed inside Printer
If you cannot pull the paper out from the paper output slot or from the rear tray, try to pull the
paper out from the rear side of the printer.
Removing Jammed Paper from Rear Side
2. Reload paper and select OK on printer's touch screen.
The printer resumes printing. Reprint the page you were printing if it was not printed properly due to
the paper jam.
473
If you turned off the printer in step 1, the print data that was sent to the printer is erased. Redo the
printing.
Note
When reloading the paper, make sure you are using suitable paper and loading it correctly.
We recommend using paper sizes other than A5 to print documents with photos or graphics. A5
paper may curl and jam as it leaves the printer.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
474
1303
Cause
Paper is jammed when feeding paper from cassette.
What to Do
If the paper fed from the cassette is jammed, try to remove the paper from the following locations.
Paper output slot
1300
Inside of the printer
Paper Is Jammed inside Printer
Feeder at the cassette
Pull out the cassette, and then remove the paper slowly with both hands.
If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open
the rear cover and to remove the paper.
Removing Jammed Paper from Rear Side
Note
If paper becomes jammed during printing and you need to turn off the printer to remove it, tap Stop to
stop the printing before you turn off the printer.
1. Rotate printer so that rear side of printer faces toward you.
475
2. Open rear tray cover and then pull up paper support.
3.
Detach rear cover.
Pull out the rear cover.
4.
Slowly pull out paper.
Note
Do not touch the inner parts of the printer.
If you were not able to remove the paper in this step, detach the transport unit cover and remove the
paper by following these steps.
1.
Detach transport unit cover.
Lift up the transport unit cover and pull out it.
476
2. Slowly pull out paper.
Note
Do not touch the inner parts of the printer.
3. Make sure all jammed paper is removed.
4. Attach transport unit cover.
Insert the transport unit cover slowly all the way into printer and take down the transport unit
cover.
5. Attach rear cover.
Insert the projections of the right side of the rear cover into the printer, and then push the left side of
the rear cover until it is closed completely.
477
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
478
1304
Cause
Paper is jammed when performing automatic duplex printing.
What to Do
If the paper is jammed when performing automatic duplex printing, try to remove the paper from the
following locations.
Paper output slot
1300
Inside of the printer
Paper Is Jammed inside Printer
If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open
the rear cover and to remove the paper.
Removing Jammed Paper from Rear Side
Note
If paper becomes jammed during printing and you need to turn off the printer to remove it, tap Stop to
stop the printing before you turn off the printer.
1.
Rotate printer so that rear side of printer faces toward you.
2.
Open rear tray cover and then pull up paper support.
3. Detach rear cover.
Pull out the rear cover.
479
4.
Slowly pull out paper.
Note
Do not touch the inner parts of the printer.
If you were not able to remove the paper in this step, detach the transport unit cover and remove the
paper by following these steps.
1. Detach transport unit cover.
Lift up the transport unit cover and pull out it.
2.
Slowly pull out paper.
480
Note
Do not touch the inner parts of the printer.
3.
Make sure all jammed paper is removed.
4.
Attach transport unit cover.
Insert the transport unit cover slowly all the way into printer and take down the transport unit
cover.
5.
Attach rear cover.
Insert the projections of the right side of the rear cover into the printer, and then push the left side of
the rear cover until it is closed completely.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
481
1313
Cause
Paper is jammed as printer pulled in printed paper.
What to Do
If the paper is jammed as the printer pulled in the printed paper, try to remove the paper from the following
locations.
Paper output slot
1300
Inside of the printer
Paper Is Jammed inside Printer
If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open
the rear cover and to remove the paper.
Removing Jammed Paper from Rear Side
Note
If paper becomes jammed during printing and you need to turn off the printer to remove it, tap Stop to
stop the printing before you turn off the printer.
1.
Rotate printer so that rear side of printer faces toward you.
2.
Open rear tray cover and then pull up paper support.
3. Detach rear cover.
Pull out the rear cover.
482
4.
Slowly pull out paper.
Note
Do not touch the inner parts of the printer.
If you were not able to remove the paper in this step, detach the transport unit cover and remove the
paper by following these steps.
1. Detach transport unit cover.
Lift up the transport unit cover and pull out it.
2.
Slowly pull out paper.
483
Note
Do not touch the inner parts of the printer.
3.
Make sure all jammed paper is removed.
4.
Attach transport unit cover.
Insert the transport unit cover slowly all the way into printer and take down the transport unit
cover.
5.
Attach rear cover.
Insert the projections of the right side of the rear cover into the printer, and then push the left side of
the rear cover until it is closed completely.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
484
Paper Is Jammed inside Printer
If the jammed paper tears and you cannot remove the paper either from the paper output slot or from the
transport unit, or if the jammed paper remains inside the printer, remove the paper following the instructions
below.
Note
If paper becomes jammed during printing and you need to turn off the printer to remove it, tap Stop to
stop the printing before you turn off the printer.
1.
Turn off printer and unplug it.
2.
Open scanning unit / cover.
Important
Do not touch white belt (A).
If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.
3. Check if jammed paper is under print head holder.
If the jammed paper is under the print head holder, move the print head holder to the far right or left,
whichever makes it easier to remove the paper.
When moving the print head holder, hold the top of the print head holder and slide it slowly to the far
right or left.
485
4.
Hold jammed paper firmly in both hands.
If the paper is rolled up, pull out it.
5.
Slowly pull out paper, so as not to tear it.
Pull out the paper at an angle of about 45 degrees.
6.
Make sure all jammed paper is removed.
486
If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and
remove any remaining paper.
Any paper left under the print head holder?
Any small bits of paper left in the printer?
Any paper left in the left and right empty spaces (B) in the printer?
7.
Close scanning unit / cover.
To close the scanning unit / cover, hold it up once, and then take it down gently.
All jobs in the print queue are canceled. Redo the printing.
Note
When reloading the paper, make sure you are using suitable paper and loading it correctly. If a
paper jam message appears on the touch screen or on your computer screen when you resume
printing after removing all the jammed paper, there may be some paper still inside the printer.
Check the printer again for any remaining bits of paper.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
487
1000
Cause
Possible causes include the following.
There is no paper in the rear tray.
Paper is not loaded in the rear tray properly.
What to Do
Take the corresponding actions below.
Load paper in the rear tray.
Align the paper guides with the both edges of the paper when you load paper in the rear tray.
Set paper information for the paper in the rear tray.
After carrying out the above measures, select OK on the touch screen.
Important
Be sure to close the feed slot cover after loading paper in the rear tray. If the feed slot cover is open,
paper cannot be fed.
Note
After loading paper in the rear tray, the screen for setting rear tray paper information appears. Set
paper information for the paper in the rear tray.
To cancel printing, tap Stop on the touch screen.
488
1003
Cause
Possible causes include the following.
There is no paper in the cassette.
Paper is not loaded in the cassette properly.
What to Do
Take the corresponding actions below.
Load paper in the cassette.
Align the paper guides with the both edges of the paper when you load paper in the cassette.
Set paper information for the paper in the cassette.
After carrying out the above measures, select OK on the touch screen.
Note
Once the cassette is inserted, the screen for setting cassette paper information appears. Set paper
information for the paper in the cassette.
The loadable paper differs depending on the paper source.
The loadable paper in the cassette is A4, Letter, A5, or B5 size plain paper.
To cancel printing, tap Stop on the touch screen.
489
1200
Cause
Scanning unit/cover is open.
What to Do
Close the scanning unit / cover and wait for a while.
Do not close it while you are replacing an ink tank.
490
1401
Cause
Print head may be damaged.
What to Do
Contact your nearest Canon service center to request a repair.
491
1600
Cause
If the lamp on the ink tank is flashing, ink may have run out.
What to Do
Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, select OK on the printer with the ink tank
installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
printer may be damaged if printing is continued under the ink out condition.
Note
If multiple ink lamps are flashing, check the status of each ink tank.
492
1660
Cause
An ink tank is not installed.
What to Do
Install the ink tank.
493
1688
Cause
The ink has run out. (The lamp on the ink tank flashes.)
What to Do
Replace the ink tank and close the scanning unit (cover).
Printing under the current condition may damage the printer.
If you want to continue printing in this condition, you need to disable the function for detecting the
remaining ink level. Touch Stop on the printer for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation
of printing under the ink out condition.
Note
If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the
touch screen when checking the current estimated ink level.
494
1689
Cause
Printer detected ink out condition (The lamp on the ink tank flashes).
What to Do
Replace the ink tank and close the scanning unit (cover).
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the printer.
If you want to continue printing, you need to disable the function for detecting the remaining ink level. To
disable this function, touch Stop on the printer for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing
under the ink out condition or by using refilled ink tanks.
Note
If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the
touch screen when checking the current estimated ink level.
495
1700
Cause
Ink absorber is almost full.
What to Do
Select OK on the touch screen to continue printing. Contact your nearest Canon service center to request
a repair.
Note
In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
496
1890
Cause
Tape for securing print head holder during transportation may still be attached.
What to Do
Open the scanning unit / cover and make sure the tape for securing the print head holder during
transportation has been removed.
If the tape is still there, remove it and close the scanning unit / cover.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
497
2110
Cause
Paper settings for printing or copying do not match cassette paper information set on printer.
Note
See below for the correct correspondence between paper settings made on the printer driver or on
the touch screen.
Paper Settings on the Printer Driver and the Printer (Media Type) (Windows)
Paper Settings on the Printer Driver and the Printer (Media Type) (Mac OS)
Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows)
Paper Settings on the Printer Driver and the Printer (Paper Size) (Mac OS)
For copying, make the copy paper settings to match cassette paper information set on the printer.
See below for details on cassette paper information set on the printer.
Paper Settings
If the print or copy paper settings do not match cassette paper information set on the printer, as shown
below, a message appears on the touch screen.
Print settings specified on the printer driver:
Paper size: A5
Media type: Plain paper
Cassette paper information set on the printer:
Paper size: A4
Media type: Plain paper
After selecting OK on the touch screen, the print or copy paper settings appear below the message.
498
What to Do
Select OK on the touch screen again to display the screen below.
Select the appropriate action.
Note
Depending on settings, some of the options below may not appear.
Print with the loaded paper.
Select this option to print or copy onto the paper in the cassette without changing the paper settings.
For example, if the print or copy paper setting is A5, and cassette paper information is set to A4, the
A5 size setting is used to print or copy onto the paper in the cassette.
Replace the paper and print
Select this option to print after changing the paper in the cassette.
499
For example, if the print or copy paper setting is A5, and cassette paper information is set to A4,
change the paper in the cassette to A5 paper and proceed with printing or copying.
Once you have inserted the cassette after changing the paper, the screen for setting cassette paper
information appears. Set paper information for the paper in the cassette.
Note
If you do not know what paper information to set, tap (Back). The previous screen appears,
showing the paper size and media type. Check the paper settings and set them as cassette paper
information.
See below for the correct correspondence between paper settings made on the printer driver or on
the touch screen.
Paper Settings on the Printer Driver and the Printer (Media Type) (Windows)
Paper Settings on the Printer Driver and the Printer (Media Type) (Mac OS)
Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows)
Paper Settings on the Printer Driver and the Printer (Paper Size) (Mac OS)
Cancel
Cancels printing.
Select this option when you want to change the print or copy paper settings. Change the paper
settings and retry printing.
Note
To suppress the misprint prevention message, change the setting as described below. When you
suppress the message, the printer uses the paper settings for printing or copying onto the paper in
the cassette regardless of whether or not the paper matches these settings.
To change the message view setting when printing or copying using the operation panel of the
printer:
Feed settings
To change the message view setting when printing using the printer driver:
Changing the Printer Operation Mode (Windows)
Changing the Printer Operation Mode (Mac OS)
500
2900
Cause
Scanning print head alignment sheet failed.
What to Do
Select OK on the touch screen and follow the instructions below.
Make sure the print head alignment sheet is set in the correct position and orientation on the platen
glass.
Make sure the platen glass and the print head alignment sheet are not dirty.
Make sure the loaded paper is correct.
For automatic print head alignment, load A4 or Letter-sized plain paper.
Make sure the print head nozzle is not clogged.
Check the print head condition by printing the nozzle check pattern.
If the error is still not resolved, try manual print head alignment.
501
2901
Cause
Print head alignment pattern has been printed and printer is waiting to scan sheet.
What to Do
Scan the printed alignment pattern.
1.
Load print head alignment sheet on platen glass.
Place the printed side down and align the mark in the upper left corner of the sheet with the
alignment mark
.
2.
Slowly close the document cover and select OK on printer's touch screen.
The printer starts scanning the print head alignment sheet, and automatically adjusts the print head
position.
502
4103
Cause
Cannot perform printing with current print settings.
What to Do
Tap Stop on the touch screen to cancel printing.
Then change the print settings and retry printing.
503
5011
Cause
Printer error has occurred.
What to Do
Turn off printer and unplug it.
Plug in the printer again and turn it back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
504
5012
Cause
Printer error has occurred.
What to Do
Turn off printer and unplug it.
Plug in the printer again and turn it back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
505
5100
Cause
Printer error has occurred.
What to Do
Cancel printing and turn off the printer.
Check the following:
Make sure print head holder motion is not impeded by tapes for securing the print head holder during
transportation, jammed paper, etc.
Remove any impediment.
Make sure the ink tanks are properly installed.
Press ink tanks until they click into place.
Turn the printer back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
Important
When clearing an impediment to print head holder motion, be careful not to touch white belt (A).
If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.
506
5200
Cause
Printer error has occurred.
What to Do
Turn off printer and unplug it.
Plug in the printer again and turn it back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
507
5B00
Cause
Printer error has occurred.
What to Do
Contact your nearest Canon service center to request a repair.
Note
In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
508
6000
Cause
Printer error has occurred.
What to Do
If the paper is jammed, remove it depending on the jammed location and cause.
List of Support Code for Error (Paper Jams)
Turn off printer and unplug it.
Plug in the printer again and turn it back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
509
C000
Cause
Printer error has occurred.
What to Do
Cancel printing and turn off the printer.
Check the following:
Make sure print head holder motion is not impeded by tapes for securing the print head holder during
transportation, jammed paper, etc.
Remove any impediment.
Make sure the ink tanks are properly installed.
Press ink tanks until they click into place.
Turn the printer back on.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
Important
When clearing an impediment to print head holder motion, be careful not to touch white belt (A).
If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.
510
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma TS9040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma TS9040 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma TS9040

Canon Pixma TS9040 Quick start guide - English - 100 pages

Canon Pixma TS9040 User Manual - German - 535 pages

Canon Pixma TS9040 Quick start guide - German - 100 pages

Canon Pixma TS9040 User Manual - Dutch - 530 pages

Canon Pixma TS9040 Quick start guide - Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info