745517
91
Zoom out
Zoom in
Previous page
1/104
Next page
Troubleshooting
87
z This section describes errors that are indicated on Canon-brand PictBridge-
compatible cameras. The error messages and operations may vary
depending on the camera you are using.
For errors on non-Canon PictBridge-compatible cameras, check the status of
ALARM lamp and take the appropriate action to clear the error. For details,
see Handling Error Messageson page 77.
z For the errors indicated on the camera and their solution, also refer to the
user’s manual of the camera. For other troubles on the digital camera,
contact the manufacturer.
Ink Error Printer detected ink out
condition
If you want to continue printing, replace the ink tank and close
the Top Cover.
Select Stop in the display on your camera to stop printing if you
do not have a new ink tank. Be sure to replace the empty ink
tank before resuming printing.
You can continue printing under the ink out condition, but this
may cause the printing trouble such as the mixing of inks, or a
printer malfunction.
If you want to continue printing, you need to release the
function for detecting the remaining ink level.
To release this function, press and hold the RESUME/CANCEL
button for at least 5 seconds, and then release it.
* Releasing the function for detecting the remaining ink level
is memorised. Please be advised that Canon shall not be
liable for any malfunction or trouble which may be caused by
continuation of printing or refilling of ink.
See Replacing Ink Tankson page 42.
If multiple ink lamps are flashing, check how fast
they flash.
Fast flashing (at about one second interval)
indicates the ink is empty. Slow flashing (at about
three second interval) indicates ink is low. For
details on different flashing speeds, see Getting
the Ink Level Informationon page 36.
Hardware Error Ink tank errors have occurred Replace the ink tank.
Printer error An error requiring servicing
might have occurred (Printer
POWER lamp flashes blue and
ALARM lamp flashes orange
alternately)
Disconnect the cable between the printer and the camera, turn
off the printer, and unplug the power cord of the printer from
the power supply. After a while, plug the power cord of the
printer back in, turn on the printer, and then reconnect the
camera to the printer.
If the same error occurs, contact the Customer Care Center.
Camera Error Message Possible Cause Try This
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma Pro 9500 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma Pro 9500 series in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info