745516

Canon Pixma Pro 9000 series Manual

85
Zoom out
Zoom in
Previous page
1/100
Next page
Troubleshooting
81
Paper Error The Paper size setting does
not match the size of the
paper loaded in the printer
(Printer ALARM lamp flashes
orange eleven times.)
Select Stop in the display on your camera to stop printing.
Check the Paper size setting on the PictBridge compatible
device and then load paper that is the same size as the setting
and try printing again.
If this message appears even when the paper loaded is the
same size as the setting, set the printer driver not to detect the
width of the paper.
See “Error Regarding the Width of Paper” on page 78.
The paper is not loaded
correctly in the Front Tray
(Printer ALARM lamp flashes
orange twelve times.)
Select Stop in the display on your camera to stop printing.
When printing on 14" x 17" / 355.6 x 431.8 mm paper, load the
paper correctly in the Front Tray according to the procedure
described in “Loading Paper in the Front Tray” on page 10 and
try printing again.
Paper jam A paper is jammed in the
printer
Select Stop in the display on your camera to stop printing.
Remove the jammed paper, load new paper, and press the
RESUME/CANCEL button on the printer and try printing again.
Printer cover open The Top Cover is open Close the Top Cover on the printer.
No printhead The Print Head is defective or
not installed (Printer ALARM
lamp flashes orange five
times.)
Install a Print Head according to the
Easy Setup Instructions
.
If the Print Head has already been installed, remove the Print
Head and reinstall it.
If the error still remains, the Print Head may be defective.
Contact the Customer Care Center.
Waste tank full /
Ink absorber full
*2
The ink absorber is nearly full The printer has a built-in ink absorber to hold the ink used
during print head cleaning, for example. This error message
indicates that the ink absorber is nearly full.
You can continue printing for a while by selecting Continue
*1
on
the display on your camera.
However, because printing is disabled once the ink absorber
becomes completely full and until the ink absorber is replaced,
you are recommended to contact the Customer Care Center as
early as possible. (You will need to replace a particular part of
the printer.)
Low ink level It is about time to replace the
ink tank with a new one
Slow flashing (at about three second interval in red) of an ink
lamp indicates that ink in this tank is low. You can continue
printing, but we recommend preparing a new ink tank to replace
the associated ink tank.
Select Continue
*1
in the display on your camera to resume
printing.
No ink The ink tank may not be
installed properly (Printer
ALARM lamp flashes orange
four times/ink lamp is off)
Install the appropriate ink tank.
The ink has run out (Printer
ALARM lamp flashes orange
four times/ink lamp flashes
fast (at about one second
interval))
Replace the ink tank, and close the Top Cover.
If printing is in progress and you want to continue printing,
select Continue
*1
in the display on your camera with the ink
tank installed. Then printing can continue under the ink out
condition. Replace the empty ink tank immediately after the
printing. The printer may be damaged if printing is continued
under the ink out condition.
If multiple ink lamps are flashing, check how fast
they flash. Fast flashing (at about one second
interval) indicates the ink is empty. Slow flashing
(at about three second interval) indicates ink is
low. For details on different flashing speeds, see
“Getting the Ink Level Information” on page 37.
Camera Error Message Possible Cause Try This
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma Pro 9000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma Pro 9000 series in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info