542910
11
Zoom out
Zoom in
Previous page
1/274
Next page
7
D
8
Attendere circa 2 minuti finché la spia
ALIMENTAZIONE (POWER) (bianca) (D) non
lampeggia p e rimane fissa, quindi andare al
passaggio successivo.
La stampante potrebbe emettere rumori durante il
funzionamento. Tali rumori fanno parte del normale
funzionamento della stampante.
Se è necessario spegnere la stampante
Prima di rimuovere la presa di alimentazione,
assicurarsi che la spia ALIMENTAZIONE
(POWER) sia spenta. La rimozione della presa di
alimentazione mentre la spia ALIMENTAZIONE
(POWER) è accesa o lampeggia potrebbe causare
l’essiccazione e l’ostruzione della testina di
stampa, con il conseguente peggioramento della
qualità di stampa.
La specica del cavo di alimentazione varia in
base al paese o alla regione.
Attenersi alla procedura illustrata di seguito.
La stampante potrebbe continuare a emettere i rumori di
funzionamento per un massimo di 60 secondi, fino allo spegnimento.
1. Premere il pulsante ON per spegnere la stampante.
2. Assicurarsi che la spia ALIMENTAZIONE (POWER) sia spenta.
Warten Sie etwa 2 Minuten, bis die POWER-Anzeige
(weiß) (D) nicht mehr blinkt, sondern dauerhaft
leuchtet, und fahren Sie dann mit dem chsten
Schritt fort.
Der Drucker gibt unter Umständen Betriebsgeräusche
aus. Dies ist vollkommen normal.
Wenn das Gerät ausgeschaltet werden muss
Vergewissern Sie sich, dass die POWER-Anzeige
nicht leuchtet, bevor Sie den Netzstecker ziehen.
Wenn der Netzstecker gezogen wird, während die
POWER-Anzeige leuchtet oder blinkt, kann der
Druckkopf austrocknen und verstopfen, wodurch
sich die Druckqualität verschlechtert.
Die Spezikationen des Netzkabels fallen je nach
Land oder Region unterschiedlich aus.
Gehen Sie bitte wie nachfolgend beschrieben vor.
Die Betriebsgeräusche können bis zu 60 Sekunden andauern, bis
sich der Drucker ausschaltet.
1. Drücken Sie die Taste EIN (ON), um das Gerät auszuschalten.
2. Stellen Sie sicher, dass die POWER-Anzeige nicht leuchtet.
Patientez environ 2 minutes jusqu’à ce que le voyant
ALIMENTATION (POWER) (blanc) (D) cesse de
clignoter et reste allumé, puis passez à létape
suivante.
L’imprimante peut émettre des bruits de fonctionnement.
Ceci est normal.
Lorsqu’il est nécessaire de mettre
l’imprimante hors tension
Avant de retirer la che d’alimentation, vériez que
le voyant du bouton ALIMENTATION (POWER)
est éteint. Si vous retirez la che d’alimentation
alors que le voyant du bouton ALIMENTATION
(POWER) est allumé ou clignote, la tête
d’impression risque de sécher et de se boucher,
ce
qui donnera une mauvaise qualité d’impression.
Les caractéristiques techniques du cordon
d’alimentation varient suivant le pays ou la région.
Veillez à suivre la procédure ci-dessous.
Le bruit de fonctionnement peut rester audible pendant 60
secondes, jusqu’à ce que limprimante soit hors tension.
1. Appuyez sur le bouton MARCHE (ON) pour mettre l’imprimante hors tension.
2. Vériez que le voyant ALIMENTATION (POWER) est éteint.
Wait for about 2 minutes until the POWER lamp
(white) (D) stops flashing and stays lit, then proceed
to the next step.
The printer may make some operating noises. This is
normal operation.
Before removing the power plug, make sure that
the POWER lamp is not lit. Removing the power
plug while the POWER lamp is lit or ashing may
cause drying and clogging of the Print Head,
resulting in poor printing.
The specication of the power cord differs for each
country or region.
Be sure to follow the procedure below.
Operating noise may continue for up to 60 seconds until the printer
turns off.
1. Press the ON button to turn off the printer.
2. Make sure that the POWER lamp is not lit.
When it is necessary to turn off the printer
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma Pro 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma Pro 1 in the language / languages: All languages as an attachment in your email.

The manual is 22,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma Pro 1

Canon Pixma Pro 1 Installation Guide - English - 4 pages

Canon Pixma Pro 1 Installation Guide - German - 4 pages

Canon Pixma Pro 1 Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info