542893
24
Zoom out
Zoom in
Previous page
1/267
Next page
Check 7: Is the amount of remaining ink sufficient to print a fax?
If the amount of remaining ink is insufficient to print, received faxes will be stored in the machine's
memory without being printed (Memory Reception). Replace the ink tank, then print the faxes in the
machine's memory.
Document Stored in Machine's Memory
Note
If the machine was receiving faxes in the fax mode, printing will start automatically after the ink
tank is replaced.
Replacing an Ink Tank
When the machine receives black & white faxes in the machine's memory, if 2-sided is selected
for 2-sidedPrintSetting in FAX paper settings in the Fax menu, selecting 1-sided may print the
faxes.
You can set the machine to forcibly print a received fax even if the ink has run out.
Set Print when out of ink in Auto print settings under FAX settings to Print.
However, part or all of the fax may not be printed since the ink has run out.
Also, the contents of the fax will not be stored in the machine's memory.
If the ink has already run out, we recommend that Do not print be selected for Received
documents in Auto print settings under FAX settings to store the received fax in the machine's
memory. After you replace the ink tank and select Print for Received documents in Auto print
settings, the fax stored in the machine's memory will be printed automatically.
Auto print settings
Check 8: Is the machine set to the appropriate receive mode?
Check the receive mode setting and change it to a mode suited to your connection if necessary.
Setting the Receive Mode
Check 9: Is FAX reception reject set to ON?
Select OFF for FAX reception reject in Security control under FAX settings.
For details on how to set, see Rejecting Fax Reception.
Check 10: Are there setting items set Reject in Caller rejection?
If you select Reject for any setting items in Caller rejection in Security control under FAX settings,
the machine rejects calls for setting item selected Reject.
For details on how to set, see Using the Caller ID Service to Reject Calls.
Machine Does Not Switch Automatically between Voice and Fax Calls
Check: Is the receive mode set to FAX only mode?
If FAX only mode is selected for Receive mode settings, there will be no automatic switching
between voice and fax calls.
Set the receive mode to TEL priority mode, DRPD*1, or Network switch*2.
If the receive mode is TEL priority mode and an answering machine is connected to the machine,
check whether a proper message is played back when the answering machine answers.
Setting the Receive Mode
*1 This setting is available only in the US and Canada.
*2 This setting may not be available depending on the country or region of purchase.
Quality of Received Fax is Poor
Check 1: Check the scan settings of the sender's fax machine.
Ask the sender to adjust the scan settings of the fax machine.
Check 2: Is ECM RX set to OFF?
Select ON for ECM RX in Adv. communication settings in Advanced FAX settings under FAX
settings.
If ECM RX is enabled, the sender's fax machine resends the fax after correcting errors automatically.
Advanced FAX settings
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MX920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MX920 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma MX920

Canon Pixma MX920 Installation Guide - English - 261 pages

Canon Pixma MX920 User Manual - English - 193 pages

Canon Pixma MX920 User Manual - English - 198 pages

Canon Pixma MX920 User Manual - English - 116 pages

Canon Pixma MX920 Quick start guide - English - 4 pages

Canon Pixma MX920 Additional guide - German - 276 pages

Canon Pixma MX920 User Manual - German - 203 pages

Canon Pixma MX920 User Manual - German - 209 pages

Canon Pixma MX920 User Manual - German - 125 pages

Canon Pixma MX920 Installation Guide - German - 30 pages

Canon Pixma MX920 Quick start guide - German - 4 pages

Canon Pixma MX920 Additional guide - Dutch - 274 pages

Canon Pixma MX920 User Manual - Dutch - 200 pages

Canon Pixma MX920 User Manual - Dutch - 208 pages

Canon Pixma MX920 User Manual - Dutch - 124 pages

Canon Pixma MX920 Installation Guide - Dutch - 267 pages

Canon Pixma MX920 Quick start guide - Dutch, French, Italian, Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info